The level of detail here is incredible. What an awesome (additional) thing for me to dream of!
@Kernlasersystems6 ай бұрын
Yes the video is real-time speed. To get the engraving depth you are limited by the lase wattage well before you are limited by speed of the machine. So, if you use a larger laser (500W, 650W) you could increase your speed and maintain the same engraving depth.
@sisirkhan9373 Жыл бұрын
Good job
@FelipedeJesus7 ай бұрын
¡El nivel de detalle es fabuloso!
@Chaos_God_of_Fate3 ай бұрын
I've got a couple of diode lasers, aiming for a CO2 next, but probably just a 60-80 watt to start. I'm going to try some experiments and see what I can do- I'm sure it'll take a lot longer, I've got a 10 and a 20 so I'll start small and see what I can do. I've gotten quite good with them over the last couple of Years, I think I can accomplish something like this. Heeeey, at least my cuts don't go too much slower! But I think Diodes are suppose to be quite good for cutting, which is most of what I do ;)
@FamazLasy8 ай бұрын
Wow, the laser engraving on wood is mind-blowing! 😍 How did you achieve such precision? Cheers from Singapore!
@Kernlasersystems8 ай бұрын
Thank you! Kern's KCAM software along with our laser power control allows us to achieve great detail when engraving!
@okayokay2010 Жыл бұрын
I like it, what is the best software will work with the kern laser? Please Thanks
@Kernlasersystems Жыл бұрын
CorelDRAW is a great graphics design software, but you can use anything that will export a PDF or DXF file.
@fernandodazan66337 ай бұрын
Wow !!!
@Evaku_09 Жыл бұрын
Здравствуйте! подскажите как правильно создать УП. Если можно подробное видео как создавать 3D на СО2.
@roughneckghost10 ай бұрын
I have a 150 watt machine for nearly 2 years now, and you can explain me how in the effin F , are you working on 80% without producing any smoke AT ALL, do please explain me this magic trick, what sort of wood is that ?
@Kernlasersystems10 ай бұрын
I think the video doesn't show the smoke very well. There is a little bit but our top vacuum picks that up. The wood used is locally sourced 3/8" maple. It does seem to laser very clean.
@betobeltran5711 Жыл бұрын
Hi! Greetings from Mexico City
@Kernlasersystems Жыл бұрын
Hello!
@storytellerHD7 ай бұрын
Thanks for the demo. I have two Epilog Fusions and pondering adding a Kern to the shop. 3D is a lot of fun and rewarding. Are .stl files used in your workstream? We used to use water for cleaning wood but warping was high risk. Surprised you recommend this post processing method. Also, doesn’t Kern have auto focus? What lens are you using for the demo? Kern or 3rd party? Thanks!
@Kernlasersystems7 ай бұрын
Hello! Any file type that you can get into CorelDRAW or Illustrator will work great for 3D. We use our post processor to export into our software as a .PDF file. Water works, but you need to use a minimal amount, otherwise you will get warping. There are other ways to clean them out that do not include water. Kern does have auto-focus. For engraving we generally use a 2.5" FL lens in our own lens assembly. I hope this answer your questions!
@nopriors Жыл бұрын
Can you share where you get your gray scale images. Thanks, Greg
@philbromley4565 Жыл бұрын
Any bitmap image can be used just convert to greyscale...
@nopriors Жыл бұрын
@@philbromley4565 Thanks
@nopriors Жыл бұрын
Can you share where the image was obtained used in the example?
@Kernlasersystems Жыл бұрын
@@nopriors Hi Greg, we got a couple of the files shown in the video from www.gantryco.com/
@nopriors Жыл бұрын
@@Kernlasersystems Thank you very much! That is exactly what I have been looking for. Your machines are amazing. I hope to step up to one of your small units one day. It is so great to see them made in the US. Hope you guys are staying warm!
@magdyhamed94894 ай бұрын
thank you for this marvelous machine , i would like to ask if there is a special 3D laser machine in arabesque art design if it is available can you send a video report for demonstration ??
@Kernlasersystems4 ай бұрын
The laser system will engrave any style of artwork you input. Artwork can be purchased from www.gantryco.com or designed custom.
@RosannaClayton Жыл бұрын
I would love to get good at designing my own file for 3D engravings.
@realworld1152 Жыл бұрын
Show me
@theantichrist42676 ай бұрын
Was that laser printing , done in real-time speed ???
@Kernlasersystems6 ай бұрын
Yes, the clips shown in this video are being shown in real-time.
@J.Howard5 ай бұрын
How many times would you have to run the file to engrave that on a marble shower tile?
@Kernlasersystems5 ай бұрын
Unfortunately, the stone will be too hard for this type of engraving.
@TheAndyroo770 Жыл бұрын
Can you do this in metal and make a 2 part mould for injection moulding?
@Kernlasersystems11 ай бұрын
This process does not work for metals. It works great for softer materials like foam, wood and some platics.
@thenightninja135 ай бұрын
Fiber laser might be able to do this. This is a Co2 laser that only cuts into certain surfaces.
@tomebling735410 ай бұрын
Can I buy the KCAM software program and will it work with my Xtool p2 laser engraver?
@Kernlasersystems10 ай бұрын
KCAM is only compatible with Kern's laser machines.
@rizalmansorkedah68054 ай бұрын
Hi , May i know how much is the OPF100-OPTIFLEX..?
@Kernlasersystems4 ай бұрын
Pricing depends on the few factors such as laser wattage, table size, and add-ons installed. Please visit our website to request a quote of a machine specific to your needs: kernlasers.com/request-a-quote/
@phucsangnguyenhoang7754 Жыл бұрын
Hello. I am Vietnamese! i really like your bipmap grayscale conversion, can you share so i can learn more? in my country few people share because they all want to hide and very few people know about this programming, I hope you share with me, learning from you I feel very happy, thank you
@Kernlasersystems Жыл бұрын
Hello, we buy the artwork from www.gantryco.com. I hope this helps!
@Spyderman500 Жыл бұрын
Can you use Light Burn software with your machine?
@Kernlasersystems Жыл бұрын
Yes, we have tested Light Burn and the .DXF export feature will load the file directly into our KCAM software!
@Kernlasersystems Жыл бұрын
We have also found that the PDF print feature also works.
@StampingToolDesign Жыл бұрын
I am living in Germany and how can I buy this machine? what is procedure?
@Kernlasersystems Жыл бұрын
Hello, please contact us at info@kernlasers.com and we can put you in touch with a local partner.
@Designingmenufecturing Жыл бұрын
how can i like adjtst tht laser nozel like you do with acrylic
@Kernlasersystems10 ай бұрын
If you mean using a wider nozzle, it is simply just purchasing this part.
@angelaleann5054 Жыл бұрын
what kind of wood did you use for this?
@Kernlasersystems Жыл бұрын
We use maple wood.
@demmickjones9503 Жыл бұрын
What file type does the grayscale image need to be when i send it to corell draw?
@Kernlasersystems Жыл бұрын
CorelDraw accepts almost any file type to be processed in their software. The most common ones would be .pdf, .dxf, .jpeg, .ai, .bmp, etc. If you wanted to upload the file directly into KCAM, then a pdf would be best!
@MrShamrock5611 ай бұрын
Could you do thiscwith a 50 w machine?
@Kernlasersystems10 ай бұрын
Sorry for the late reply. If you have the right software and system, you would be able to do this with a low-wattage laser tube 30w to 50w would work fine, but you would have to go really slow to produce the depth. our lowest wattage is 100w (traveling about 10 to 15 inches per second, at 80% power.)
@34178147 ай бұрын
Olá, gostaria de adquirir
@MichaelAllwin Жыл бұрын
how do we buy this machine in India?
@Kernlasersystems Жыл бұрын
If you fill out this request a quote form, kernlasers.com/request-a-quote/ a salesman will reach out and be happy to help you! Thank you!
@ZackCrain Жыл бұрын
I have some amazing ideas but that laser cutter is probably very very expensive
@skyview69949 ай бұрын
They have one for every budget, check the K40`s? I started there....
@phucsangnguyenhoang7754 Жыл бұрын
Oh no! why when I use BMP image file to sculpt with Laser, the text is almost flat on the top and almost flat on the bottom, almost like it's just like a cnc milling cutter, I'm using a 1310 Co2 laser of Baisheng China, I Bought in Vietnam through one of their agents, it's not like the ones in the West. Wish your model will have agents in Vietnam as well as Southeast Asia
@Kernlasersystems Жыл бұрын
We do have some distributors in Asia. Here Is a link to a map of all our distributors across the world. kernlasers.com/where-to-buy/
@SantoshPS-c8f Жыл бұрын
I would like to buy this machine, could you please guide me and quote the rates.
@Kernlasersystems Жыл бұрын
Hi Santosh, We would be happy to provide you with some quotes and pricing. Please fill out the request a quote form and a salesman will reach out to you today! kernlasers.com/request-a-quote/