Kevin Talbot's DIY Monster Truck has expensive problems

We find damage on the Game Over Monster Truck and attempt to fix it.
🚗Win one of my cars raffall.com/kevin_talbot
Come to my next event monstertrucknationals.co.uk/
🎓Kevin's 11 steps to work from home - eBay Powerseller Blueprint kevtalbot.clickfunnels.com/sq...
👕Game Over Clothing teespring.com/stores/kevs-merch
🚗My RC KZbin Channel - / @kevintalbotrc
🧡INSTAGRAM / talbotkev
❤️TICTOK / kevtalbot
💙FACEBOOK / kevintalbotvideos
💚RUMBLE rumble.com/user/KevinTalbot
🚗Kev's RC Basher School - kevin-talbot.teachable.com/p/...
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Most videos are RC Cars, business, Amazon FBA, eBay, Monster truck, Cars, insurance, cryptocurrency and other topics.
subscribe!!
#Kevintalbot #rccars #rc

[@blameusa7082]

why you used a mag drill set up like that blows my mind? SDS drill on drill, and just hold it.

[@KevinTalbotTV]

If you really want to blow your mind, try it. Just make sure you film it 😂

[@maltesrc]

@@KevinTalbotTV😂😂

[@blameusa7082]

You worried about the torque effect? Press lighter and go slower… use cutting fluid…. Dont know why you trying to troll! Should see my man cave has more tools in than yours all milwaukee and im only a poor person.

[@KevinTalbotTV]

@@blameusa7082 you're amazing

[@blameusa7082]

@@KevinTalbotTV oh man, gone from loving you to thinking douche. Oh well....

[@jagergerg9771]

I love how you do all your own work, that’s actually the best part in my opinion

[@user-mj9zz8og3f]

Yes sir

[@EasilyMinecraft]

Woooo lets go more Game Over content!!!!!

[@chris2414]

"Jesus! I need a fat bas..." this had me howling 😂😂😂

[@MrPlum1282]

Your welding beads are beaut! 👌🏻

[@johnmilesko9745]

Some of the monster truck guys have entire crews of people to work on their trucks. Love how everything you have done to your truck is all Kev! Great work!

[@Sponsoredbybaz]

Where have you been man KZbin has been boring without you

[@ImanthaDeSilva-eo3yt]

Yup🎉 love from sri lanka🙂🇱🇰🤎🎉

[@Lucky_Buttery_Waffle]

I love monster truck videos, which makes them hard to find, yet this guy has a hole series on them and I watched the series 2 times.

[@bigtsperspective5831]

You’re tire patch kit has me rolling 🥸

[@MAGGOT_VOMIT]

Kev, if ya ever buy yourself your own hydraulic-hose crimping machine, make sure the first set of hoses that you make for it, are 2 sets of replacement hoses for the crimping machine itself. Ask me how I know. 😆

[@droopmoose]

I love the absolute pinnacle of form follows function

[@robertatallian1085]

More Kev!!!! Yessss! 💪

[@chvfrk]

Love that you are living your dream bro

[@chvfrk]

It's not quite as violent as banger racing. But a lot of fun.

[@MorzakEV]

11:46 I was convinced after all that bodging of a setup, and the hand ground 45deg drill, it was all going to go wrong. Fair play for making that work so well!!!!

[@daily_dose_of_flying]

yooo finally monstertruck updates

[@SLOvids96]

23:52 stop it kev 😂😂😂 was getting more drawn into the build and the information given then you edit a moment into perfection

[@m2cracing168]

NOBODY has more fun than you!! great job on getting that tire on the bead!!!

[@grassrootztakulusroq8011]

Kevin! Loafers in the shop?! What's next???? Flip flops and black socks?😂😂 Get some boots dude!

[@christophblack9390]

Thanks for sharing!

[@rc.remedy]

Large scale aircraft casually perched on the Lambo, love it 😄

[@TheDudeRc]

Awesome stuff Kev! I will never complain about putting bead locks on my RC trucks together again! LOL

[@racing-ric]

4:30 I like how this guy is trying to fix a monster truck tire with tire prop’s I use on work to fix some small holes in car tires😂 I will be amazed if it will hold on a jump

[@rogerpackham15]

I used to live in Breckenridge Missouri. Was the home of Orange Crush Monster Truck. The owner would let us kids set in the truck. One of my fondest childhood memories.

[@lukenukem1164]

You have a lot of perseverance to be fair. It's fun watching you overcome and adapt to problems on the the truck with very limited tools for this kind of work.👍

[@Cheshire..]

I hope he does more cockpit vids this year! 🤞 So cool to see it from that perspective.

[@IOSALive]

Kevin Talbot, This is fantastic! I subscribed right away!

[@RCKickschannel]

Great content Kevin, some solid progress.

[@user-wk2zi9fu5m]

I love the monster truck videos, keep it up kev❤️

[@HyperReality4]

The monster trucks vids are some of my favorites! Great content! I’ve been a sub for a long time and am so happy for you making your dreams come true with this monster truck, you even got a rc Ramonator replica! Cheers Mate! Good Luck on the Show

[@Liam-Gaming574]

I love watching the monster truck content, i even take notes while watching so i know the best tips for if i want to make a monster truck

[@tylercousins7779]

I tore a 3cm hole in the side of my atv tire. I was 90km from my truck. Instuffed 6 of those tire plugs in and 3 weeks later it was still holding air. They are awesome.

[@stevenanderson2489]

Good to see Vinnie and Ian. Truck is looking great. Winning 🙌

[@Alexander-pm6io]

For the split tyre, you need to get in to the back of the tyre, grind the back of the split slightly and then use a vulcanising patch.

[@michaelmiddleton4253]

Love these videos, always lived the trucks from a kid. Videos always chill me out a bit when I'm struggling so ty.

[@Max-ck9qi]

finally lets go

[@MAGGOT_VOMIT]

Brings back memories. Back in the early 90's I was using Char-Lynne #211-1012 orbital steering valves on my trucks to give me 2.5 turns lock to lock.

[@brutallyhonestmf5578]

Thanks for the MT content. You are the only one making it. Hope V2vids comes back to YT we need more MT content!

[@allanritchie1539]

Mann, I love the way you do the wrenching, your all MANN.😊😊😊😊😊

[@GaminGit]

Those tyre repair kits are ace. I got a screw in a brand new £250 tyre and bunged one of these in and its been holding perfectly for the last 6 months. Worth every penny!

[@TABRO284]

Great video Kev, really enjoyed it.

[@desertlife4660]

Keep up the great work!

[@ianmangham4570]

Fantastic Kev,that drill was just awesome 😮 🇬🇧

[@noahsrcs1808]

That thing is a beast with the big wheels on it!! Love the noise it makes!

[@JCIIIBULLET]

HELL YEAH IT'S WORTH IT ❕

[@Jeff44]

Kev I expect you missed the 'Top Gear' when they did the episode from Iceland in winter. Those guys are crazy, they drove huge 4x4s with similar balloon tyres to yours. They run them at 3psi on the glaciers, and they often come of the bead and are useless. Their cure was similar to what a few commenters suggested, as spraying lighter gas inside the tyre, taking a few steps back and throwing a lit match at the wheel. The gas instantly ignites and blows the tyre back on the bead at the same time. Best done OUTSIDE. It was hugely impressive to see, I recommend finding the episode, it was with Clarkson in it.

[@DestructionDan]

Looking good dude! I should just buy your old stuff to get mine going but shipping would probably kill it. Look forward to the race and freestyle footage.

[@bling1634]

It was cool seeing you work on Game Over

[@leechamberlain5706]

Excellent stuff Kevin.

[@nicklee9590]

Love your content kev, But most of all love seeing your comments on other channel's on how awake you are. Pureblood m8.

[@KevinTalbotTV]

boom!

[@BobbyS-dg3zl]

I’ve missed u Kev ❤❤ happy to have u back

[@KitfoxPilot]

A good shot of starting fluid is the way to put those tires back on the rims!

[@lancebrown396]

What's up Kev? I just learned this the other day my dad taught me but in this situation you can take a ratchet strap and run it around the tire like all the way around the tread and squeeze the tire and that'll make it seal up on the rim and then you can air it up and then let the ratchet strap loose

[@jbrc1322]

Stacking dimes on that jig 🔥

[@kennysmith3799]

Followed you for a while! love the monster truck updates, awesome work KT, smashing it 🤘

[@KevinTalbotTV]

Awesome thank you!

[@mitchellholroyd2837]

Hope we get to see you in the states.

[@dazaspc]

Hey Kevin A couple of ideas that might make it a bit easier in the future. The Mag based drill is the go for the countersinking of the wheel nut holes and there is really nothing wrong with using extension sleeves but there is an easier way. You could use a milling cutter made for cutting dove tails. This would require the mag base on the other side of the wheel and removing the cutter for each hole then remounting it in the drill. Instead of pushing with the drill you would just pull it up to the required depth. Also a bit of a heads up about the new hydraulic cylinders. If they have been assembled dry and seem to be stuck in the barrel like yours were you should really avoid rotating the rod and even hammering on them as well. Why? Well when dry the seals can stick so hard to the barrel that especially when rotating you can tear the edge off that does the sealing thus causing the piston to bypass or the gland end to leak. If you can you should always try to run the cylinder a couple of strokes with oil and then rotate the shaft once it has been bled even only turning once moving. After the first 5 or 10 strokes this isnt quite as important as the seals will be well lubed. I just connect them up to the oil if possible with the cylinder filled as high as convenient. It will move rapidly for the first few strokes until the air is out of the system so you should be aware. Seeing your jack for the truck you could easily add a couple of valves and other fittings to it so you could run the cylinders a little without firing up the truck. I know you have already done both jobs and they worked out great but the info could help Future Kev so thats all it was for. Cheers

[@KevinTalbotTV]

thanks for the info dude, appreciate it :)

[@danielesdau3220]

Finally a new kev vid🎉

[@laramiekreeper]

Sooo very proud of you Kev!! Greeting from Wyoming USA!!

[@isaiahjohnson4105]

Kev... Top 10 best video to date. Way to go. Thank u so much for the years of knowledge and laughs sir. U need an award of some sorts... Imo

[@KevinTalbotTV]

Glad you enjoyed it

[@DOWNUNDERRCS]

can't wait to save up enough for your course

[@krisluypaert6807]

Kevin, i haven't got a clue what you're doing but its fun watching! Best of luck to you.

[@weegaz22]

Kev, roll the tyre outside and take out the valve, lie it on its backside of the rim and try and stand on it to try and get it seated up close to the bead, now get a can of brake cleaner, spray it inside the rim just past the bead and then spray a line of it on the wall, now get a lighter and ignite the trail left on the wall and move your arse out the way quick as poss, it'll basically ignite and push it back onto the bead, its a trick by for off roaders and truckers, there will be youtube videos showing it.

[@alexsfetcu946]

worth the wait!! Lets goooo Kev 👏

[@neontetra1000]

I’m so proud of captain bodge it . He gets the job done!

[@forrestcrabbe]

You do a great job fabbing stuff up. Using the lucas bottle as an oil funnel is a stroke of genius 🤘y'all have a badass day🤘☕️🤘

[@carlstevens4981]

When we have problems like yours with the tyre, we just ram a few plugs in 😂😂

[@MangoJim90]

The amount of work with this machine, maaaan 👍🤗

[@avinashramdeni5350]

Yooo after a long gap monster video ❤

[@markuspfeil841]

I ❤ your MT content!

[@microbuilder]

Fulfilling childhood dreams is always worth it. ESPECIALLY if its having your own monster truck! lol

[@CANNINGRC]

It's all worth it cant wait to see this in action ❤❤🎉🎉

[@mrawesomeness8558]

Cmon,get in the hole..... We`re in! Made me squirt beer out of my nose! I know,im weird...... 🤣

[@samcourtrc6767]

Kev she is insane buddy sounds out of this world ❤

[@joshuaferran3619]

Throw a little flex seal on the split 😂 should be mint!!!

[@johnclarke8180]

Awesomeness!!!!

[@RAY-1984-rc]

Look forward to seeing this at pod again you have been busy buddy

[@Netbug]

Love it, Kev! (Just a tip: if you're leaving nuts or bolts loose, put some red or bright green tape on them as a reminder to torque them later)

[@laramiekreeper]

Dont worry....your Mig welding looks great!!!

[@racing-ric]

New that Tom Meents has retired.., Congratulations! You are my new favourite monster truck driver💪🏻

[@thegasgeezer]

Just like the beed locks on the XMax Kev !!😂😂

[@cmarshall4559]

Amazing that it's all half arsed but actually works out. Do you ever do any fuel system maintenance as methanol is very corrosive?

[@hobbykinghorton6201]

Should put this music behind all Kev's vids 💯🤘

[@DavidTurner-gp4hu]

Well cool 👍👍

[@jadenterry183]

its worth it its been your dream for years you been working on it for years i remember waking up and see if u put the engine in it and see if you made progress for years i love them videos

[@HIMOTHYPRODUCTIONS..]

We need Kevin in monster jam

[@diogocarlos1]

It's a hobby It's funn Its worth it 😜🤗🔥🔥 Ready steady, bash again 👍🏼👍🏼

[@TheDemonic38]

So in other words a out the box monster truck is the same as most RTR RC’s spend a fortune on it , & then have to send more upgrading it typical 😂😂😂😂 all worth in the end though 😂😂😂😂

[@arcticcirclerc]

mega wrenching session... RESPECT... but got the ocd-chillz at 27:00... Wrong tire at front-right... treads backwards.

[@gregsags3364]

when i was in the aussie army and posted to a cav unit one of the cars put 8 of them tire repair plugs in. we were in ASLAVs

[@andybowyer3602]

You can double those puncture repair strips even treble them and they hold!

[@minnesotatomcat]

Try hooking up your steering lines backwards once and try to drive it, it’s ridiculously hard! I used to work in a case ih manufacturing plant that made the big sprayers. I was a tester and every once in a while the assemblers would hook the lines up wrong and we’d go to start it up and drive it out the door for the first time and it would be backwards. If there wasn’t time to fix it on the line we’d have to drive it like that over to our repair bays. It was so weird, your brain fights you from trying to turn the wrong way which is the right way 🤣

[@lucgrenier6031]

Love the shoes really English looking! Great vlog thanks!

[@Bhase425]

You almost did it the correct way when you were putting those bacon strips in the tire instead of at an ankle you got to do it straight and as closely as in line with the hole as possible once you get it shoved in enough, pull it out really quick or yank out the reamer quickly Love the videos. There's just something about them that makes them unique and special

[@davehughes2687]

Hahaha...I need a fat!!!... You're a legend kev!!...love the video's..

[@chrisprobert6]

Prior planning and preparation, prevents piss poor performance 😅👍💪

[@M4A2Master]

Kevin we use air compressor and add a little pressure to move the cylinders in and out, makes it much easier.

[@dylanewelch]

As a tire tech who has put on many of those tires.... This hurts to watch. Good goin kev. Theres definitely better ways to do it but you got it all done. 🤣🤣

[@Adub86]

Radial dynamics is the best. And with that increased orbital valve, those bigger cylinders shouldn’t be an issue. It’ll turn better with your spools.

[@technicalmadman2986]

Hi kev, I think it's definitely worthwhile, and whatever puts the biggest smile on your face, right? 👍👍

[@KevinTalbotTV]

biggest smile ever playing with this!

[@Paul0088]

Boom 🎉 epic truck