Perfecting the GR86 Wheel Fitment!

  Рет қаралды 54,160

Kevin Vo

Kevin Vo

Күн бұрын

Пікірлер: 142
@noneofmybusiness9895
@noneofmybusiness9895 10 ай бұрын
Just pulled the trigger on a 2024 brz in their pearl white. So stoked and will be following your channel RE mods and upgrades.
@danielgarciarascon1928
@danielgarciarascon1928 2 жыл бұрын
You make it look so easy to install.
@KevinVo
@KevinVo 2 жыл бұрын
If I can do it, so can you!!
@HubbzKitchen
@HubbzKitchen 2 жыл бұрын
Great video on the rears. I appreciate all the info you give in your videos Kevin, they are all very useful for a new GR owner.
@KevinVo
@KevinVo 2 жыл бұрын
Thanks for the support! Glad to hear you're finding the videos helpful!
@stinoo8
@stinoo8 2 жыл бұрын
i have an 2016 86 and still like to watch them :D
@JasonT.S
@JasonT.S 2 жыл бұрын
For the brz counterpart, you also have to remove the front hubs to get the clearance to install the 3” studs. I suppose the aluminum knuckle is bulkier.
@KevinVo
@KevinVo 2 жыл бұрын
Annoying extra step, but not too bad!
@sukiko_92
@sukiko_92 2 жыл бұрын
hi i finally got my gr86 order, i can't wait to have it. Here in Spain it has gone on sale this month. your videos are great. Thank you very much for the content. Cheers
@KevinVo
@KevinVo 2 жыл бұрын
Hope you enjoy it! Thanks for watching!!
@Paleroize
@Paleroize 2 жыл бұрын
Came here to say replaying 14:46 over and over made my day
@KevinVo
@KevinVo 2 жыл бұрын
😂😂 more bloopers needed!
@0xadada
@0xadada 2 жыл бұрын
When I did the extended ARP studs on my 2017 BRZ I ended up taking the rear emergency brake shoes apart and it was a big pain. Cool that you can do it by pulling the hub out a little bit without disassembling the ebrake
@RealWheelDeal
@RealWheelDeal 2 жыл бұрын
Instead of an 18x9.5 +45, wouldn't a +40 with a 5MM spacer work better? Might be able to skip the extended studs with that.
@KevinVo
@KevinVo 2 жыл бұрын
I'd still need to run extended studs. I wouldn't be comfortable running any more than a 3mm spacer on the OEM studs. As for a +40, that would cause more issues with the rear fitment, which is more of a headache to deal with than the front.
@RealWheelDeal
@RealWheelDeal 2 жыл бұрын
@@KevinVo 100% makes sense.
@douglasslayback3441
@douglasslayback3441 16 күн бұрын
Kevin…subscribed and watching your videos, but have a question sir…just ordered the base GR86 for my son, so we can add the wheels and exhaust we like. It will be his daily, no plans to track, so will keep oem suspension. We are trying to find a definitive answer about wheel/tire combinations…what is the max wheel width/tire width with appropriate offset without any conflicts in the f/r wells for factory suspension? Going to 18in wheel, just don’t want to order something that won’t fit…and all the hassles that will present. Really hoped a 245/35 18 on a 18x9 wheel would do the trick, maybe 40-45 offset, can you help please?
@jtmhollands
@jtmhollands 7 ай бұрын
I've been running 5mm spacers on my car for a while and it's been fine, I heard spacers larger than 5mm will definitely need extended studs.
@specialforceresident
@specialforceresident 2 жыл бұрын
Always very informative on all your vids! Thanks Kev!
@KevinVo
@KevinVo 2 жыл бұрын
Happy to hear you're finding them useful!
@specialforceresident
@specialforceresident 2 жыл бұрын
@@KevinVoalso kev if you have time to reply to me i have a question. I just bought avid1 av6 18x9.5+38 with 255/35/18 wheels. With bc coilovers. Im not too sure if itll rub. If ever the tires will do you have any recommendations on what a good tire number will be?
@uhhnah634
@uhhnah634 2 жыл бұрын
Been binging these 86 vids, best content out there
@KevinVo
@KevinVo 2 жыл бұрын
Thanks so much for watching!!
@Fraginator
@Fraginator Жыл бұрын
The downside with wheel spacers is that (at least in my area) most shops won't reinstall a wheel with a spacer. Makes it difficult for those who don't do their own work.
@KevinVo
@KevinVo Жыл бұрын
I've never ran into that situation before so can't comment, but you could just remove the spacers for that short period of time if needed.
@AFedosick
@AFedosick 2 жыл бұрын
Great video as always. Would love to hear what the headers sound like with the original muffler installed.
@KevinVo
@KevinVo 2 жыл бұрын
I'll be tossing different exhausts on here to mess around with how it sounds.
@xcuses101
@xcuses101 Жыл бұрын
What’s the “one more trick” you were referring to at the end to alleviate the rubbing left on the top inner fender liner on the driver side? Can’t seem to find it in your later videos.
@KevinVo
@KevinVo Жыл бұрын
I installed some adjustable front lower control arms that allowed me to wider the track width bringing the wheels a bit further away from the chassis.
@askay747
@askay747 5 ай бұрын
Fantastic video! Many thanks!
@Treaxvour
@Treaxvour 2 жыл бұрын
Why such wide wheels? Doesn't it make it harder to break the rear end loose?
@KevinVo
@KevinVo 2 жыл бұрын
I'm going for a meaty and aggressive look. Not worried about breaking the rear end loose. I want the car to stick.
@S042069
@S042069 Ай бұрын
Hey Kevin, great detailed and in depth video. quick question for you. Do you know what would be the torque spec for the caliper bolts it has Brembo calipers? Thanks
@jjs1krr
@jjs1krr 2 жыл бұрын
love your vids just picked up my gr86 friday!
@KevinVo
@KevinVo 2 жыл бұрын
Awesome, you're going to love it!!
@DJNADJIBBeatz
@DJNADJIBBeatz 2 жыл бұрын
The infos are very useful it's a very clear step by step process. keep up the quality work guys. thank you very much
@KevinVo
@KevinVo 2 жыл бұрын
Appreciate the support!!
@henr1k5
@henr1k5 7 ай бұрын
Just to confirm, you can do the 3" studs on the rear with this technique? Some other video is claiming you can only do 2.5" studs in the rear with this technique, but he didn't completely remove the 4 bolts for the rear hub and also not the ABS sensor.
@antoniqto1979
@antoniqto1979 2 ай бұрын
Hi Kevin, I'm looking for glow blue rims for my gr86 but nowhere have them. Could you suggest my some brand or places to get them? Thank you in advance.
@fred04001
@fred04001 2 жыл бұрын
Always a pleasure watching your clean work and explanations! Kevin, in your opinion, wich is the minimum safe thread engagement, in terms of mm or turns? Thanks in advance from Spain!
@GP-fc7jv
@GP-fc7jv 2 жыл бұрын
It’s a good thing that you are changing the studs I do know that the first generation had weak studs
@KevinVo
@KevinVo 2 жыл бұрын
Preventative maintenance!
@wonjoongyoon4128
@wonjoongyoon4128 Жыл бұрын
Hi Kevin, how wide is enough offset without any modifications?? Or 18x9.5 +45(your offset) + 245 tyres. is it ok???
@dragoontwo
@dragoontwo 2 жыл бұрын
Three things Kevin. Where did you get your torque specs from? The FSM shows different then what you say in the video. I was able to install the 2.5" studs without fully removing the hub bolts on all 4 corners of my BRZ. The overlay that you have for the reverse light bar. Does it fully cover the lens or is it cut to match the opening? It's only 3 body clips to remove the cover and I would prefer the whole lens to be covered.
@KevinVo
@KevinVo 2 жыл бұрын
I may have been referencing the FSM for the previous gen. I'm surprised they've changed that much with the parts being almost identical. As for the studs, I was installing the 3" studs so those didn't have enough clearance. The overlay for the reverse light bar is larger than the opening. It covers 95% of the lens apart from the "ridged" outline of the lens.
@elementor100
@elementor100 2 жыл бұрын
This channel is the BRZ Bible
@fauxvier8519
@fauxvier8519 2 жыл бұрын
Appreciate the upload
@Menace_sti
@Menace_sti 2 жыл бұрын
I dont even have a gr86 but i enjoy these videos! Haha
@KevinVo
@KevinVo 2 жыл бұрын
Appreciate all the love and support!!!
@ArmySigs
@ArmySigs 2 жыл бұрын
Thanks Kevin, about to order my GR86 and then begin the looong 6-12 month wait for delivery...
@cdsprech
@cdsprech 2 жыл бұрын
Another excellent tutorial Kevin! This car is coming along so nicely. Also, why do the new stud threads change color after install? Is that deposits from the lug nut threads on the new studs?
@KevinVo
@KevinVo 2 жыл бұрын
It's the coating on the studs coming off due to the friction when threading the lug nuts on and off.
@khrizangel02001
@khrizangel02001 2 жыл бұрын
You should mention that the hub assembly n suspension on the brz especially in the rear is completely different
@KevinVo
@KevinVo 2 жыл бұрын
You may be mixing that up with the front. The brz has an aluminum hub. The rear is identical besides the sway bar.
@censoredialogue
@censoredialogue 2 жыл бұрын
god i can’t wait till i have a GR86. i wanna put some Advan TC-4s on it so this video is really helpful
@KevinVo
@KevinVo 2 жыл бұрын
Hope you get one soon!! Happy to help!
@future_phonk
@future_phonk 11 ай бұрын
That "du ma" at the end 😂
@inferno8908
@inferno8908 2 жыл бұрын
When will you guys be restocking the studs on the website
@Blacklisthgs
@Blacklisthgs 2 жыл бұрын
What is your one more trick? Another Cusco suspension part?
@CDecker33
@CDecker33 9 ай бұрын
Not sure if you updated this, but were the 5mm spacers enough?
@jsa310
@jsa310 Жыл бұрын
Great videos!
@andysky5
@andysky5 2 жыл бұрын
Will adding the spacer cause vibration problem if the wheels are not centred anymore ?
@KevinVo
@KevinVo 2 жыл бұрын
Great question! If you use hubcentric spacers, you won't run into vibration issues as that'll insure everything is lined up correctly.
@andysky5
@andysky5 2 жыл бұрын
@@KevinVo thanks for your reply
@FosterJohnsonMedia
@FosterJohnsonMedia 2 жыл бұрын
this build is getting spicy 🥵
@KevinVo
@KevinVo 2 жыл бұрын
As spicy as the one chip challenge?! 😅🌶
@RL86
@RL86 2 жыл бұрын
May I know what is the best wheel fitment,without coils? Is the 18X8.5 and 235 or 245 tires will do?
@KevinVo
@KevinVo 2 жыл бұрын
You can probably get away with an 18x8.5 +40 with a 235
@RL86
@RL86 2 жыл бұрын
@@KevinVo Thanks KEV, maybe an idea to make a video on wheel size fitment hehe, because as noob like me, I do not know what it means by +40 offset
@stinoo8
@stinoo8 2 жыл бұрын
when you place the wheel back on the studs i think once more: damn those are some thick wheels
@KevinVo
@KevinVo 2 жыл бұрын
THICCCC 😜
@thr-asher
@thr-asher 2 жыл бұрын
every time im wondering what size or what torque a bolt is you say it like 2 seconds later
@slowgr86
@slowgr86 5 ай бұрын
I was thinking about getting tein flex z coilovers and run a 18x8.5 +35 with 255/40 for my gr86. Do you think it'll rub?
@monza5005
@monza5005 Жыл бұрын
Hi what size of tyre runs with 18x9J? Running on stock suspension setup. Dont want to cut the fenders or modify lower arms, will 18x9j rub the fenders
@thepanduhhh
@thepanduhhh 2 жыл бұрын
Cheeky du ma at the end of the video 👀
@KevinVo
@KevinVo 2 жыл бұрын
😂😂😂 gotta include more bloopers!
@Argentinagang2022
@Argentinagang2022 Жыл бұрын
Kevin what kind of wheel socket lugs are you running? Would love to copy them!
@KevinVo
@KevinVo Жыл бұрын
Muteki SR45R
@Argentinagang2022
@Argentinagang2022 Жыл бұрын
Awesome. Thank you for the quick reply. Super helpful. For the studs you linked we should get four of those to do front and rear right? It looks like the one you linked are 3.5”?
@KevinVo
@KevinVo Жыл бұрын
@Tom yes you'll need 4 packs. You don't have to do the extended ones if you don't need. The make shorter versions as well.
@Argentinagang2022
@Argentinagang2022 Жыл бұрын
@@KevinVo thank you Kevin. Very helpful as usual!
@future_phonk
@future_phonk 2 жыл бұрын
If you ran a 18x9 would that alleviate the inner fender rub issue?
@KevinVo
@KevinVo 2 жыл бұрын
It could possibly depending on the offset.
@future_phonk
@future_phonk 2 жыл бұрын
@@KevinVo what was the offset you had on your set up again?
@KevinVo
@KevinVo 2 жыл бұрын
@@future_phonk +45
@future_phonk
@future_phonk 11 ай бұрын
Would going to a 245 tire or going with a +40 offset alleviate the inner fender rub?
@RickNock
@RickNock 2 жыл бұрын
I was under the impression that 7mm was the thickest spacer you could run w/o extended studs??
@KevinVo
@KevinVo 2 жыл бұрын
If we take some rough estimates, the stud length with the wheel off is ~25mm. The wheel is going to take off another ~8mm so that leaves us with ~17mm of stud length. If you add in 7mm spacer that's ~10mm we're left with. For thread engagement, we want about 1-1.5 times the diameter of the stud which is ~11.8mm. I like to err on the side of caution so I'd like at least 1.5 times that which with a 7mm spacer that would not give us. With a 3mm spacer, we're left with ~14mm which still isn't the 1.5 I shoot for, but at least it's more than 1x the diameter of the stud.
@RickNock
@RickNock 2 жыл бұрын
@@KevinVo thanks for the info man!
@atpgarageatl
@atpgarageatl 2 жыл бұрын
That fitment 👌
@KevinVo
@KevinVo 2 жыл бұрын
PERFECTION!!!!
@djpreview
@djpreview Жыл бұрын
I tried this, but I wasn't able to pull the hub out enough (like you did). 😔
@KevinVo
@KevinVo Жыл бұрын
It takes a bit of finessing
@yungmiggyy5999
@yungmiggyy5999 Жыл бұрын
Hey Kevin! Quick question, I was thinking of running a 17x9 setup. Do you think I’d still have those clearance issues in the front and rear like you did or you think I’d be good? Ideally I was gonna run 18x9.5 cause I want a similar aggressive meaty setup but after seeing the issues you had im second guessing it lol
@rollerchester1
@rollerchester1 Жыл бұрын
Kevin, I did the arp extended wheel stud install on my 2022 BRZ I did however every steps, after I bring everything back. When I run the car, I'm hearing a grinding & clicking noise coming from the part where I worked on. Tried to diagnose what could cause the noise but do you think that pulling the hub on the rear will damage the CV joint enough to get replaced?
@KevinVo
@KevinVo Жыл бұрын
It shouldn't cause any damage at all. I would run through everything again and double check things. Get the car up in the air and spin the wheel to see if you can locate the noise.
@rollerchester1
@rollerchester1 Жыл бұрын
@@KevinVo bro, the issue was, my brother loosen the other wheel lugs without me knowing and only worked on the one wheel. I put everything back and never informed about the loose left wheel and it was the issue, loose wheel lugs 😬
@Joshold
@Joshold 10 ай бұрын
I was looking at the ST XA coilovers and they dont have camber plates. Are they necessary if I plan to lower and add wheels? Or will I be able to have a good stance without that. They're only 1300 compared to the racecomp super steet 1 for 1900
@JoseLuisServatQuezada
@JoseLuisServatQuezada 2 ай бұрын
Do you think we could use 18 x 7.5" and 235/50R18 tires on a stock GR86?
@KevinVo
@KevinVo 2 ай бұрын
That'd be a pretty tall tire that could lead to some rubbing.
@JoseLuisServatQuezada
@JoseLuisServatQuezada 2 ай бұрын
@@KevinVo 235/45R18 ?
@backroadblast6603
@backroadblast6603 Жыл бұрын
Have you figured out the fitment issue at the front?
@zulswift5278
@zulswift5278 6 ай бұрын
18 8.5 +40 or 42 /225 18 40 ok?
@carlmanu
@carlmanu 2 жыл бұрын
Kevin, Do you know if the carbon fiber driveshaft you guys sell (meant for the 1st gen) works on the GR86?
@KevinVo
@KevinVo 2 жыл бұрын
I honestly don't know ☹
@ghosty_vr6838
@ghosty_vr6838 Жыл бұрын
What spacer is that
@itaybutavia1204
@itaybutavia1204 2 жыл бұрын
Professional !
@KiraOniiChan
@KiraOniiChan 2 жыл бұрын
I heard someone broke the OEM studs from changing their tires but at least it looks pretty easy to change them out if it ever happens lol
@KevinVo
@KevinVo 2 жыл бұрын
Happens often! I believe it's actually because the OEM lug nuts more so than the studs.
@gerardogomez4695
@gerardogomez4695 Жыл бұрын
Where was the follow up video 😅
@Menace_sti
@Menace_sti 2 жыл бұрын
Spamsubie vibes in the intro
@KevinVo
@KevinVo 2 жыл бұрын
Spamsubie is the 🐐
@M4mba98
@M4mba98 7 ай бұрын
Why the hell does this car not come with a wide wheel version from the factory? F*cking 8/9 inches, I want them 10.5 inch wheels.
@thomaslefevre884
@thomaslefevre884 2 жыл бұрын
So ...apparently Thomas is right...the + 38 is a better fit?
@KevinVo
@KevinVo 2 жыл бұрын
+38 will require trimming in the rear.
@thomaslefevre884
@thomaslefevre884 2 жыл бұрын
@@KevinVo trimming?..of what?
@KevinVo
@KevinVo 2 жыл бұрын
@@thomaslefevre884 of the fender garnish and the metal behind it.
@thomaslefevre884
@thomaslefevre884 2 жыл бұрын
@@KevinVo thanks
@ThatbluMR2
@ThatbluMR2 2 жыл бұрын
They took my fockin eyes
@KevinVo
@KevinVo 2 жыл бұрын
🙈
@FujiboHeavy
@FujiboHeavy 2 жыл бұрын
LMAO. that first clip tho!
@KevinVo
@KevinVo 2 жыл бұрын
😂😂
@bicboi46
@bicboi46 2 жыл бұрын
Damn bruh i had my volume fully blasted around people in the beginning of this video -_-
@KevinVo
@KevinVo 2 жыл бұрын
GOT'EM!!!! Jk I'm sorry! 😅
@Dzady
@Dzady 2 жыл бұрын
That is a crazy amount of work just to fit those massive wheels. 😃Do you need them for something specific or is it just the looks? However, impressive skills and knowledge at making your car exactly how you want it. Thumbs up for the bloopers. 😁
@KevinVo
@KevinVo 2 жыл бұрын
Mainly for aesthetic purposes as I wanted a meaty and aggressive stance to the car.
@Trisma
@Trisma 2 жыл бұрын
Note to self, buy 18x9.5 +40 minimum
@KevinVo
@KevinVo 2 жыл бұрын
Then you'll need to trim the rear fender 😅
@Trisma
@Trisma 2 жыл бұрын
@@KevinVo Did you roll your guards at all? trying to find the perfect size..
@KevinVo
@KevinVo 2 жыл бұрын
@@Trisma no, I haven't done any modifications to the fenders.
@KindredAutomotive
@KindredAutomotive Жыл бұрын
Me who just watched the TireRack video where the 225 tire way outperformed the 245 tire on their GR86…. YT: Here’s a guy with a 255 front tire!! 😂 For real tho, clean build and solid stance and fitment! Looks good and the video quality is 👌🏼 Edit: Bonus props for leveling the audio! So many car vids blow your ears out when the impact makes an appearance…
@armandorodriguez9000
@armandorodriguez9000 Жыл бұрын
Los ingenieros de Toyota y Subaru no se para que estudiaron
@mrporsche4236
@mrporsche4236 Жыл бұрын
Do not use 9.5 inch wheels 8.5 is max with max 245 tyres
@backroadblast6603
@backroadblast6603 Жыл бұрын
I just don’t trust wheel spacers, man
@KevinVo
@KevinVo Жыл бұрын
They use the same concept as how your wheels are mounted.
@backroadblast6603
@backroadblast6603 Жыл бұрын
@@KevinVo I just hear about them failing so often that they make me nervous. Are the lipped version more stable? I’m just worried about the strain they put on the hub
@peechabot
@peechabot 3 ай бұрын
douuuu maaa
@MR3DDev
@MR3DDev 2 жыл бұрын
My man when u gonna add headlights to the car? I cringe seeing an 86 with no eyes.
@KevinVo
@KevinVo 2 жыл бұрын
I'm working on it. Everything takes time 😅
@mrslickkRick
@mrslickkRick 2 жыл бұрын
Düûú
@KevinVo
@KevinVo 2 жыл бұрын
😂😅 hopefully my mom doesn't watch that part
Every Mod on my 2022 GR86!
10:54
Kevin Vo
Рет қаралды 69 М.
$800 Coilovers WORTH IT? | 2022 GR86
17:23
Kevin Vo
Рет қаралды 60 М.
UFC 287 : Перейра VS Адесанья 2
6:02
Setanta Sports UFC
Рет қаралды 486 М.
Wheel Fitment Guide | All you need to know
5:52
FTspeed
Рет қаралды 46 М.
2022 GR86 gets FULL SUSPENSION replacement!
15:20
Kevin Vo
Рет қаралды 48 М.
Stop Buying CHEAP Coilovers!
13:55
Kevin Vo
Рет қаралды 40 М.
Custom Circuit Demon Headlights for the GR86!!!
13:00
Kevin Vo
Рет қаралды 35 М.
The Perfect Fitment for the GR86?!
9:05
AeroflowDynamics
Рет қаралды 19 М.
2022 Toyota GR86 Perfect Wheel Fitment!
9:58
Kevin Vo
Рет қаралды 76 М.
New BRIDE Seats for the GR86!
10:23
Kevin Vo
Рет қаралды 63 М.
The Reason My Toyota GR86 Engine Got DESTROYED
10:39
Misha Charoudin
Рет қаралды 105 М.
UFC 287 : Перейра VS Адесанья 2
6:02
Setanta Sports UFC
Рет қаралды 486 М.