NEW 2022 GR86/BRZ 4th Brake Light

[@Mike-qp8bv]

That's a really nice looking aftermarket light. I love the F1 function. It grabs your attention more than just a solid light will. Very good. They need to come out with a new trim piece just to finish it off. I give it a 9 out of 10. It's too bad how quickly a front license plate can ruin the look of a car. But what can you do, it's a necessary evil.

[@KevinVo]

I'd rather have the plate than pay for a ticket haha

[@FosterJohnsonMedia]

Quick and easy install and a huge improvement over the stock reflector/reverse lights! 😍

[@KevinVo]

I'm excited to see all the different options come out!

[@brzjason]

its such a bummer that we have to put the front license plate. It looks so much better without! Love your videos! I've been binging all of your gr86 videos! Im planning to get one and your videos are making me more excited to get it!

[@FabricateFrog]

Heard about some 2022 gr86s having engine failures lately from track runs and light drifting, hows your gr86 holding up? Considering getting one but all the news about this Subaru boxer engine failing has me skeptical esp bc toyota doesn't honor their warranties very often.

[@Unchainedmaple888]

Even worse is that if there is something wrong with the engines, Toyota technicians will just make the problem worse. If you really want one, I'd highly recommend going with a BRZ even if it is uglier. My local Toyota dealer didn't have the necessary parts for my first oil change so I had to pay my local Subaru dealer to do it instead.

[@Yalla2A]

I have 17,000 miles plus on my car with ab 4 oil changes and so far everything has been good just keeping a eye out the best I can do

[@KevinVo]

I'll be covering the RTV issue soon!

[@shaheryarmalik2406]

Hey man this looks great! Quick question how so you feel about the chance of the engine failure issue going on with the gr86's? And about how if you track them they void warranty

[@KevinVo]

That's a good question. I don't want to say it's blown out of proportion, but right now we have only seen a small handful(if that) of cars with issues. Of course, there could be more that have not surfaced, but I really can't say anything for certain until there's more evidence that this is a widespread problem. Am I tempted to drop my oil pan to check? Yes, but I also don't want to cause myself anymore headaches if Toyota does decide to do something about this and then I try to go in to have them fix it and they refuse saying I've tampered with the oil pan. So I guess I'm saying we need to wait to gather more info. I'm happy to see the press is picking it up though. I'm hoping that will for action from Toyota.

[@BPEKSupraInteractive]

@@KevinVo Could it be possible to detect a noticeable amount of silicone in the oil by doing an oil sample like Blackstone Labs? I'm guessing if you go with this route, don't have to take apart the oil pan and risk voiding warranty.

[@MH-rj1kg]

@@BPEKSupraInteractive early on there may be a high silicone level in the oil anyway. It may give you an idea but wouldn't actually tell you if you have the issue or not. The only way to be sure is to drop the pan and look (which voids warranty from my understanding). My plan is to keep giving it hell and let toyota throw another block in if it messes up. At least until they come out with an official fix or response then there doesn't seem much we can do.

[@grchris8625]

Finally a glimpse of one!!

[@KevinVo]

It was only a matter of time!

[@anthonymiritello8438]

Hi- on a different subject, are there any aftermarket red calipers for the 2022 GR86 that are a direct replacement fit and require no further modifications?

[@KevinVo]

Yes, pretty much any of the BBK kits that fit the previous model will fit the GR86. Not everything will fit the BRZ though due to the aluminum knuckles.

[@Unchainedmaple888]

Something else that I learned from this video is that replacing our taillights with aftermarket ones should be a breeze. Too bad only like one company has announced anything.

[@KevinVo]

It's going to be tough, the OEM design looks really good to me!

[@mtvideos8]

Great content Kevin! Can you drop some info on the expansion nuts you used for the rear. I think that is the best idea I have seen yet for the rear bumper.

[@KevinVo]

I used 10-32 rubber expansion nuts I found at my local hardware store

[@michelfortier9563]

Quick question, I'm seeing a few KZbin videos by guys talking about silicone in the pick-up tube of the engine. Potentially could be an issue. Are they using silicone instead of a gasket? That would really piss me off as this same issue happened on my 1996 Corvette where the silicone dried up and started leaking.

[@KevinVo]

Yes, lots of manufacturers these days utilize rtv instead of traditional gaskets.

[@boost331]

Would look good if it fit correctly in the trim. I have already modded the OEM part. Mine now has a strobing 4th brake light and reverse lights. Came out pretty awesome for $20.

[@markmedia3871]

Looking to do this to mine! Any tips or guidance on how you installed?

[@boost331]

@@markmedia3871 I used the wiring from the main harness in the trunk. I did not remove any tail lights. There is a rubber grommet in the trunk that drops the wires right were you need them. I remember it was a brown wire for the brake light source. Bulbs and sockets I just bought on amazon.

[@boost331]

@@markmedia3871 kzbin.infon_AWn8wpGKw?feature=share

[@KevinVo]

I remember doing that on the previous gen as well! Simple and cheap mod!

[@MH-rj1kg]

@@boost331 didn't happen do to any install vids or pics did you?

[@ryandenize1576]

Where can I buy that brake light

[@KevinVo]

It'll be available on FTspeed eventually.

[@FujiboHeavy]

Nice!! I like it. Everything bolts up and plug n play!

[@KevinVo]

Super easy install!

[@86glint]

Front plate inside by the windshield not allowed in your state Kev? Passenger side corner.

[@KevinVo]

Nope, not visible enough.

[@86glint]

@@KevinVo boooo 😩

[@MR3DDev]

oh no, hope they fix that fitment, otherwise it would look great. The relocation kit was much better on the FRS, this looks like the car is missing a piece.

[@KevinVo]

They'll be fixing the fitment for sure with their own cover.

[@thebest-bt8gc]

Just wondering, if you didn’t want to route the wires from the tail light down, could you just plug and play???

[@alabdel1388]

Curious if you could do a video on Silicone-gate, and whether yours is seeing the same issue.

[@ElAndresRodriguez]

There's been 1 dude with the issue. Why blow it out of proportion?

[@alabdel1388]

@@ElAndresRodriguez lol...no, it's more than one dude.

[@KevinVo]

I will likely be doing a video going over everything. Not sure if I'll drop my pan yet.

[@alabdel1388]

@@KevinVo thanks man

[@blackdj145]

when is this 4th brake light coming out?

[@RL86]

If you drill the hole , will it rust that area of the car?

[@Jay-fb6uw]

You could zip tie the plate to the grille temporarily while you figure something else out

[@KevinVo]

Not a terrible solution for now.

[@nodrogkam]

I use the Raceng plate relocation but it also doesn't sit well with me on this car.

[@KevinVo]

I think I'm going to look at different options.

[@MH-rj1kg]

Where did you get that wiring harness? The other install I saw had the bumper off and splicing wires to make it work. That's outside of my expertise so I was going to pass. It looks MUCH easier to install with that harness.

[@KevinVo]

The wiring harness is something that will be available on FTspeed.

[@RevolveAuto]

Looks so clean!!

[@KevinVo]

Thanks!!

[@thr-asher]

I prefer the OEM trim piece, why don't they just move the design a little more to center?

[@Ryu.86]

Other than the cutout issue this looks great~ Not sure if it will have cutout issues too with the 3rd gr rear bumper spoiler~

[@brianb7844]

Great video. What size expansion plugs did you use???

[@KevinVo]

Hmm let me see if I can find the packaging.

[@brianb7844]

@@KevinVo Thanks, appreciate it.

[@KevinVo]

10-32 x 1/2

[@brianb7844]

@@KevinVo Thanks

[@martinrps13]

I don’t understand why it is two horizontal Y’s. It doesn’t match any other line or flow of the car. As for the rest of the light: looks like every other 1990’s nopi knock off alteza. I think the whole thing looks cheap.

[@KevinVo]

They'll likely come out with tail lights to match.

[@LivingLifeInRAW]

@kevin vo where can i buy the expansion nuts?

[@KevinVo]

I picked them up at my local hardware store, but I'm sure you could find them at Menards, Home Depot, Lowes, etc.

[@G8RRPh1]

Is the harness included?

[@creativexface]

Make a review on the: 1). Aluminum hood 2). Engine Silicone excess sealant

[@KevinVo]

What exactly do you want to know about the hood? I'll probably end up doing a video on the RTV.

[@MH-rj1kg]

are you talking about the hood fluttering at higher speeds?

[@forceplayer98ka56]

I cant wait for this!!

[@KevinVo]

SOOOOOON!!!!

[@clapzwrld8462]

When will it be for sale?

[@KevinVo]

Don't have any specifics on the release quite yet.

[@brianwatson60]

Do they have slimline front option for registration plates in your state?

[@KevinVo]

Unfortunately not!

[@3.5ELI]

I’m new to the channel bro I just got the same car !! I can’t wait to get those lights 🔥🔥

[@KevinVo]

Appreciate the support! Hope you're enjoying the car as much as I have!

[@dodgeviperman]

Did you need to do anything with the blue and yellow wire?

[@KevinVo]

No, I believe those are for different functions that weren't used in this light.

[@thebest-bt8gc]

@@KevinVoif you plug in just the power plug, would you still get the reverse light? Don’t care about the brake.

[@al3x14]

Hey man these lights look cool, which quick connect harness did you buy, if you can send me a link or the name of it so I can buy for my car aswell! Thanks dude !

[@ak2112]

I like the extra brake light but those reverse lights are not good. And yeah, the front plate relocation kit does not look good on these at all.

[@KevinVo]

What don't you like about the reverse?

[@Fibroadenoma2]

Where can I buy this

[@tonyliang90]

Try the carbonio no drill license plate mount. It mounts up to the middle, i think that'd look nicer and doesnt need drilling

[@KevinVo]

Interesting! I'll have to look into that!

[@sumanthmewalal6230]

Hey Kev, I love your content and I'm going to get a GR86 soon, I love all your mods but can you pleaae leave a link where we can get these from, or maybe there is one and I didn't notice... keep up the great work and awesome content !

[@perenniallong]

ugh hate that my state requires front plates T.T That brake light looks soooo clean!

[@KevinVo]

Yeah, I hope they get rid of that law soon.

[@671021]

The bar that connect two side brake lights did not glow really bugs my mind...great vid tho

[@stevebodalenko5286]

Better rip the sump off to check for silicone in the pickup. Looks like a real issue on the GR's.

[@KevinVo]

I'll likely make a video covering the RTV issue.

[@DJTomEGun]

Is this Kouki only or can it work on a Zenki?

[@KevinVo]

This will only be for the Kouki.

[@reza658]

Ima wait till they fix the cover

[@KevinVo]

They will be fixing it. It won't be for sale without it I don't think.

[@ratedak13]

where can this be purcahsed?

[@KevinVo]

Not currently available yet, but they'll be available on FTspeed

[@tonyespinoza6978]

Where can I get luvers

[@kobedario6286]

Preorder available???

[@KevinVo]

No preorder at this time as things are still being worked on.

[@PJSnow23]

Link to the rubber inserts?

[@jukeboxzero1]

Home Depot: Everbilt #10-32 tpi x 5/8 in. Brass Expansion Nut Store SKU # 597800 Internet # 204276054

[@KevinVo]

I just used a 10-32 rubber expansion nut I found at a local hardware store.

[@shinigami052]

Good video, the light looks good. I've been wanting to change mine on my '20 BRZ just waiting for a sale...unless someone can get me free shipping to Hawaii *cough**cough*

[@KevinVo]

Shipping is so expensive to Hawaii haha

[@shinigami052]

@@KevinVo Yeah I know :(. Luckily when I got my exhaust they gave me a deal on shipping since I was ordering so much. Hoping for a good Black Friday sale or something.

[@crankypipo]

Yo kev, theres been a slight uproar over timing chain gasket/sealant found in oil strainer blocking oil causing engine failure these past few days over the net Let us know how it goes for yours if youve been driving it hard

[@KevinVo]

I'll likely be doing a video covering the RTV issue.

[@NikolaiCherepanov]

Can someone explain to me the whole offset license plate trend? Looks kinda dumb to me and bugs the hell out of me for it not being in the middle of the car

[@KevinVo]

I can't speak for everyone else, but for me I don't want to to drill into my bumper so a relocation kit is the next best thing.

[@NikolaiCherepanov]

@@KevinVo Okay that make sense I'm in a state that doesn't have front license plates so Ive never really looked into why people do the onset thing.

[@EctoPlasmic]

I like the OEM look better. If only there was a OEM with the brake light...

[@KevinVo]

Could pick up the JDM one that has the light.

[@DylanTK]

I'd run the plate in the stock location personally, if you have to run it lol.

[@KevinVo]

I don't want to have to drill into the bumper is the issue.

[@DylanTK]

@@KevinVo, ticket time lol. I run mine no plate as well, but I've been lucky so far.

[@ttt3377]

My car looks great I can't wait to win it in a give away. What's next? Maybe some bucket seats? Or maybe some brembos?

[@KevinVo]

I guess you'll just have to wait and see!

[@grub321]

Put the plate in the middle

[@KevinVo]

I don't want to drill the bumper though.

[@Math333w]

@@KevinVo toms nose!! It’s expensive tho but I love the look

[@tomatodamashi]

The last comment got taken down, it seems. Perhaps because I provided a link. Anyway, I found a great LED fourth brake light for your gr86/BRZ. It's by GOOD GUN. It's already available and it lines up properly with the car's design. Give it a look if you're in the market.

[@JD.Has.Died27]

Not sure if it's the same one, but I just recently bought the good gun break light for my 86, just waiting for it to arrive, hopefully it looks as good as on the website

[@M-PASTA]

I have never run a front license plate in 14 years of driving

[@KevinVo]

State Patrol here are sticklers about it.

[@nimmer4749]

Yo, love your videos, and the lights are cool as hell but that front plate is a travesty! The GR86 is the most stylish entry level sports car on the market, and the front grill is a huge part of that. Leave that baby alone, stock is best here.

[@Mike-qp8bv]

My wife really likes the old Pontiac Solstice, except for the license plate. It just ruins the entire look of the front end. It's too bad designers can't do anything about plate placement. Unfortunately most places require that plate.

[@KevinVo]

My biggest issue is if I mount it in the middle I'll have to drill holes in the front bumper.

[@anthonysulmonte6282]

Definitely getting this third brake light for my GR86 when it's released to the public. Looks so much better than the stock one.

[@meliodas4560]

Wow. If they couldn't even make an aesthetic piece look right, I really wonder about longevity and quality of components... 🤔

[@Drifthaze]

I will say no front plate if ya can.

[@KevinVo]

If I could, I'd go that route, but the state troopers here are sticklers for it.

[@Bergacci88]

I hope there's an F1 design model , the model showcased looks too ricey.

[@KevinVo]

What do you me an F1 design?

[@Bergacci88]

@@KevinVo just a plain square looking one like the ones on the 370z

[@chrisydarg1268]

Cool idea but it looks cheap to me

[@brandongarza96]

No front plate is the best. Doesn’t take away from the big front grill. Take your chances just drive the speed limit and roll ur windows down when you do spot a cop 😂😂

[@KevinVo]

I've taken that chance too many times and it hasn't worked well haha they just tell you to roll the windows up.

[@hoopofficial4371]

Sorry but that new light looks like ass! Don’t like the relocation plate either. Plate blends in better in the center. Good video nonetheless. Thank you.

[@KevinVo]

No need to apologize! Looks are subjective and everyone is entitled to their opinion!

[@user-ep6wd7ip7v]

Better check that oil pick up tube before it’s to late lol not surprised it’s a Subaru engine

[@KevinVo]

I'm not too worried about it, but maybe I'll do a video covering it.

[@user-ep6wd7ip7v]

@@KevinVo prob get a lot of views if you did

[@neodezynr]

The design of the brake light isn't cohesive with the rest of the car and it's not even set right? What's up with the line and dots? These reverse arrow design are horrid.

[@KevinVo]

I'm anticipating a tail light release that would have a similar design, but we shall see.

[@Unchainedmaple888]

#abolishfrontlicenseplates

[@KevinVo]

The ones I used were 10-32 rubber expansion nuts I picked up at my local hardware store

[@calvinvo7466]

First lol

[@KevinVo]

Vo master race.

[@naldopiskal4209]

@@KevinVo where's the link for the items?

[@KevinVo]

@@naldopiskal4209 not available yet.