KFI Poly Pro: A Better Way to Plow!

I discovered some troubling issues when I took the plow off the General this spring. After talking with the KFI guys at Hay Days, I have a plan to address them. I'll explain what's going on what they suggested I do about it.

[@HerkCC]

Thank you for sharing....

[@RZRDunesandSnow]

Still waiting for the snow in the PNW, enjoyed the video

[@Rick-yo2nc]

A starting point for the springs is too slide a business card into the spring

[@ponycarfan]

Good idea!

[@AndrewsOutdoorAdventures]

Good video! I just did a short vid on my plow ...the cable wire through part of my Bison Bar...had to do some grinding!!!

[@ponycarfan]

Thank you!

[@mossman381]

I hooked my KFI plow up to my 6X6 today. Noticed it was a little hard to get the pin in on one side. I suspected something was bending. I didn't look it over that good just cleaned up the little bit of wet snow we had.

[@ponycarfan]

Those plows take a lot of punishment, and it’s possible you bent one end of the push tube. However, I always end up shuffling it back and forth to get everything lined up, even if it’s not bent.

[@KevinMn1]

New push tube looks a lot stiffer and the added pully should really help!

[@ponycarfan]

I hope so!

[@paddyg56472]

I love your thoroughness. Good to see your videos. See you on the trail👍🏼

[@michaelwas8549]

Wow. Exactly what I was looking for. I have a Yamaha viking 700 and am thinking about a KFI . Definitely going to get the newer version pushtube! Thanks!=

[@hankmcarthur6432]

My fairlead is flipped the other way around...

[@ponycarfan]

Hadn't thought of that. I'll eventually have to address the bent fairlead mount and steel bumper. When I do, I might try it the way you have it. Seems like that might be stronger.

[@falco5616]

looks like the right side of the blade is also bent to me

[@ponycarfan]

Thanks, I’ll check it out.