⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info/door/J9xpq0qUZevSEdBSFqO2ow ⛐ Link to donate on GoFundMe: gf.me/u/y4u9cd
@nvestnself74622 жыл бұрын
It does state on kia's website to make sure the roller tappet is in the low position before taking off fuel pump up top, otherwise the bolts on the fuel pump will break. You also want to add oil around the O ring on the fuel pump and oil on the notches of the roller tappet if replacing it before installing. Great video thanks!
@josefernandez84072 жыл бұрын
Hey Grayv, how do I get the roller tappet in the low position?
@innovatecoin99902 жыл бұрын
I second this how do you get it on low position?
@arielrwc24 күн бұрын
Hey did you find out? @@innovatecoin9990
@pattycausey3792 жыл бұрын
Thank you for this video.. I've took my car to multiple places and no one could figure out what was wrong
@tdbone353 жыл бұрын
I replaced my cam follower and my Sonata doesnt make that annoying metal to metal noise car is quieter now... good video
@ronaldrollins47152 жыл бұрын
Did you reuse the same bolts? And torque specs? Thanks.
@tdbone352 жыл бұрын
@@ronaldrollins4715 yes I used the same volts that were used to hold down the high pressure fuel pump... those can be reused unless they're damaged. Torque them to proper specs
@Juntggg28 күн бұрын
@@tdbone35how do you go about torquing them to proper specs?
@jordanperez8245 Жыл бұрын
I love your videos bro! They’ve helped me with all my Kia issues.
@whitewidowz33223 жыл бұрын
My fuel Pump is fine but I hear the cam follower making noise. Do I have to replace fuel pump or can I just replace cam follower and be ok
@williammitchell1785 Жыл бұрын
I love this guy and I love his videos but he talks too much in the beginning especially when you're in a hurry trying to find out what's wrong with your vehicle
@ثقففكرك-ص1ح3 жыл бұрын
I wish you continued how to put the new one- the order is important
@tahashahidi59352 ай бұрын
Do we need to grease the new cam shaft follower before installing?
@jordanperez82459 ай бұрын
So I finally got around to ordering the camshaft follower and installing it. The noise did not stop, however if I unplug the electrical connector to the pump while running the noise stops. Therefore it must be the pump itself. No? We will see when I get around to getting that part lol.
@MohammadShahen-jz9zt4 ай бұрын
ماهي اعراض تلف الفيول فلشر. الطرمبه الضغط العالي وشكراً
@josefernandez84072 жыл бұрын
After replacing the high pressure fuel pump and the cam follower, does the system need to be reseted or timmed or calibrated?
@MohammadShahen-jz9zt4 ай бұрын
هل ممكن الإصلاح أو للتنظيف للشباب فيول
@oleglog69273 жыл бұрын
Can this fuel pump follower make noice only in morning during cold start and than go away or it is making rattle noise permanent?
@clarencebrown92 Жыл бұрын
It’s west n tear time for a new one.
@amyrhagonzales86183 жыл бұрын
Is this gonna be the same on Kia Sorento V6?
@X7rocks8 ай бұрын
Does this work on the 2018 model as well?
@MarioMartinez-kl1rq Жыл бұрын
You need to change the titles to your videos, you dont show how to replace, only remove. Theres no reinstall
@bosspranks83496 ай бұрын
Same as how he removed it bro it's simple
@MarioMartinez-kl1rq6 ай бұрын
@@bosspranks8349 nah, you gotta rotate the crank til that piston on the hpfp is at the bottom, other wise youll damage it
@bosspranks83496 ай бұрын
@MarioMartinez-kl1rq o okay but that's only if you got to change it right or should you change it anyway?
@diyweekendwarrior Жыл бұрын
Pulled the hpfp off to change the valve cover gasket. The fuel pump is covered in wet soot. I just walnut blasted the valves. 2015 kia gdi 2.4. 95kmiles. The inlet for the fuel pump is caked. Have you seen this?
@jordanperez8245 Жыл бұрын
Wow you actually walnut blasted the valves. I would love to do mine but don’t have the tools to do so. Seems like such a hastle
@halilovic83810 ай бұрын
I think I have same problem on my Kia optima plug in hybrid. 2019. Still have warranty. Went to dealership and they said it’s normal engine noise, but I clearly hear the noise or rattle from the engine. Is this the same issue on my optima plug in?
@samburton996111 ай бұрын
please do this for 2019!!
@mustafaaliraqi84852 жыл бұрын
Thank u
@pedrobueno968 Жыл бұрын
I am looking to find the 10 mm bolts you took off, but I cannot find them anywhere.
@bestbomb172 жыл бұрын
Replaced my hpfp few months ago and then car started making the squeal. Yesterday i got the cam follower and when i replaced it, everything was fine....then today it just came right back 😑🤦♂️. Its only on cold start though and when accelerating anywhere above 3k rpm before engine is at operational temp.
@oleglog69272 жыл бұрын
I have metal noice from high pressure fuel pump after replacement of this camshaft follower. What could go wrong during the replacement?
@jordanperez8245 Жыл бұрын
Did you ever figure out the problem?
@chuckcolvin89682 жыл бұрын
Is it bad to erase code it's giving me a knox sensor code a friend erased code now it runs great??
@mikekerezsi9672 Жыл бұрын
Does anyone have pictures of the cam itself or the lobe that rolls on the follower bearing
@amandawhitis87882 жыл бұрын
Is the diagnostic code P1233?
@mikekerezsi9672 Жыл бұрын
The rebuild I just did has a double notch instead of single
@armaan10102 жыл бұрын
I have KIA Optima 2016, but I can't locate high pressure fuel pump in same place shown in this video... where it can possibly be?
@bestbomb172 жыл бұрын
If its not a turboed vehicle then you probably dont have a high pressure fuel pump. You will have the low pressure pump which is in the fuel tank (drop back seats, lift up carpeting and it'll be under the black metal cover)
@stephendriver12 жыл бұрын
Can I just throughly the high pressure fuel pump and reuse it? Where i live they want $1000.00 for it
@bosspranks83496 ай бұрын
They sell em online under $100
@chuckcolvin89682 жыл бұрын
How much does a cam follower cost
@anthonymorley95492 жыл бұрын
I have a Kia Optima estate 2018 but I cannot seem to locate the low pressure fuel pump wii no I’ve goes inside the tank, can anyone help with this ?
@inevitablestarmagazine21672 жыл бұрын
Its under your left hand passenger seat.You need to remove your rear seats to access it.
@MadeInTexas9 ай бұрын
You did not replace the fuel pipe that is a must and no torque specs? How many people are going to destroy their car because of your video. Very unprofessional. Fail👎
@Juntggg28 күн бұрын
Im thinking about trying this myself, do you have any advice?
@leoramirez91022 жыл бұрын
Why don't you just say which battery terminal to disconnect in this video?!! Unsubscribed!
@gregmorris6604 Жыл бұрын
It don't matter which battery cable you take off first as far as hurting the car. If you take the positive off first just make sure to not have any thing laying there that can fall on the battery and touch the positive post and any metal on the vehicle. It will cause a flash and could harm the computer or catch fire. This video is about replacing a fuel pump and leaking fuel on the engine. As a general rule always remove your ground first on any vehicle then the positive. To put it back on connect positive first and then the ground last.