Рет қаралды 2,942
This is the final part of the head removal but this is the installation of the head. This is on a 2011 Kia Soul with a 2.0 liter engine. I show the final parts that need to be removed and then install the head with all of the torque specs. I will also include all the torque specs here as well as the parts below.
Torque Specs:
Intake Manifold: 11-16 lb ft
Exhaust manifold: 31-40 lb ft
M10 Cylinder Head bolts: 16 lb ft, 20 lb lft + 65 degrees, 65 degrees
M12 Cylinder head bolts: 20 lb ft, 33 lb ft + 65 degress, 65 degrees
Camshaft bearing caps: 11 lb ft
Timing Chain tensioner: 20 lb ft
Cam sprocket: 75 lb ft
Timing belt Idler: 32-40 lb ft
Harmonic balancer bolt: 123 lb
Parts:
Head gasket kit with head bolts: amzn.to/3WCsQHi
Timing belt kit with water pump: amzn.to/3Vka5aF
thermostat: amzn.to/3jvcS3u
thermostat housing: amzn.to/3YOOie3
Spark Plugs: amzn.to/3vc8Lw5
Spark Plug Wires: amzn.to/3vgHicp
Coolant: amzn.to/3jtH5Ab
Oil Filter: amzn.to/3HXSKRN
Oil: amzn.to/3BZCLiz
Honing stone: amzn.to/3YOZtDS
Filming Gear:
Go Pro Hero 10 Kit: amzn.to/3S9kd55
Go Pro Endurance Battery: amzn.to/3S1KXUS
Manfrotto Camera Tripod: amzn.to/3BnmYch
Instagram: / 0p_0verhaul
TubeBuddy Link: www.tubebuddy....
Patreon: / operationoverhaul