The annoying trunk rattle is finally gone! I had Kia's fix and it did not permanently solve the issue. THANK YOU!!!
@scotty1cameron3 жыл бұрын
I agree with the comment about rubber washers, but this video was still awesome and will go a long way for me keeping my sanity!! Thanks!
@jarosawksiazczyk30823 жыл бұрын
Wellllll right, now my trunk doesn't close even after reverting that fix :D It just does a beeeeeeeeeeep....
@SilentKnight432 жыл бұрын
I used just metal washers and the hatch made a VERY loud noise when the latch released while opening. Removed the washers. Might try rubber washers - I think there's a very small tolerance for washer thickness. I've adjusted the screw-out plastic spacers. Tip - if using the zip tie on the plastic spacer - go with black so it's not as noticeable.
@DesignDawg5 жыл бұрын
Thanks! It's worth a try. I just had mine in for service, and while the rattle is driving me absolutely nuts, the tech said "nothing abnormal regarding the hatch--just normal squeaks--no action needed." They had previously installed the "fix," before my car actually developed the rattle at all. Now that it has it, they won't touch it. Lame. This looks promising. Will tackle this weekend. Question: does this video not have sound?
@DesignDawg5 жыл бұрын
nvm--just heard the sound at the beginning.
@SameScreen5 жыл бұрын
"Just normal squeaks." That pisses me off. Nowadays, squeaks are very well controlled in most cars and are therefore not normal. I get the fact that cars are the sum of thousands of parts, but in some cases like this hatch rattle, this is a little absurd to be considered normal.
@ronlheureux76234 жыл бұрын
Personally, I would use something like weatherstrip adhesive or similar on that adjustable stop screw. A black zip tie would look better, but none would look best. Possibly even that mat material along with an adhesive above the visible length. I hate visible mods and there are always ways to make them inconspicuous.
@dennisorel4 жыл бұрын
do you just do the upper hatch back or the lower as well on the car itself
@dennisorel4 жыл бұрын
simply put, there are two components on the hatch itself and two on the car itself
@bluesboytyler4 жыл бұрын
If the solution is this cheap and simple, why hasn't Kia thought of it? Boggles the mind....
@ryanm14663 жыл бұрын
This is wayyyyy too much. I added 4 rubber washers and the noises are gone. 😂
@B1ackAlloy19923 жыл бұрын
Did you just add the 4 rubber washers and remove the metal ones? Or you just add the rubber washers to the metal ones?
@ryanm14663 жыл бұрын
@@B1ackAlloy1992 metal with rubber washer
@billmcelhaney12 жыл бұрын
@@ryanm1466 Any way you could post which washers you purchased?
@caitlyngraff50462 жыл бұрын
Can you post what rubber washer you used? Thanks in advance.