KickAss Smart Battery Monitor

[@AhhDyL]

I have done everything correctly.. yet it won’t show the current value or time left. I am missing the final menu setting ATT?

[@KickAssProducts]

G'day there here is a link to the support page for you & remember our team is there to help if you can't nut it out supportportal.kickassproducts.com.au/en-GB/search/shunt?page=1 Cheers Craig

[@anthony_8122]

Very nice but how do i run one of the in a power station without drilling holes in it to run the wire out for the display screen ...? im asking this becuase i dont want to stuff my warranty up @KickAss Products

[@KickAssProducts]

G'day Anthony,i have experimented with this & the way i did it is drilled into the box,as far as warranty goes your not going to effect the operation of any of the components by drilling a hole in the battery box so i would not be fussed or worry about it warranty wise - just use common sense,remove the battery etc before drilling - there is also another option i tried & by removing the inside plastic base & removing the red push button switch that powers the volt meter (remember you are now putting a lcd screen that shows the info),so the volt meter will no longer work but i was able to insert the white plug end of the harness that connects the screen to the shunt - the plug hanging out was kind of ugly i thought i preferred the neat little slot i made by tracing around the white plug just below the lid base near the side handle drilled 2 x 6mm holes one above each other & cut out a slot using Stanley knife,was nice & neat as per any custom install your limit is your imagination - have fun with it

[@jasonkozikowski6994]

@@KickAssProductshi kickass you wouldnt happen to have any photos you can share of how you installed this as per your reply to Anthonys question. Be interested to see how it looks by replacing the volt meter with this

[@teresapocock]

can you do a video on setting up the battery monitor ? Please

[@KickAssProducts]

G'day mate here is a link to the instructions for you,if you head over to the website & go down you will see the instruction manual that explains it all for you kickassproducts.com.au/products/kickass-500a-battery-monitoring-shunt-with-remote-display Cheers Craig

[@travisdawson6863]

Hey guys , I tried the instructions with no success. It's got me trumped

[@Hotakeus]

Got me stumped as well! Trying to wire it to a kickass control box

[@reeceg6058]

If running two batteries in Parallel- is the instal the same (just connect to the one battery?) Thanks

[@KickAssProducts]

G'day there,yoy would connect everything to the p- terminal & both the batterys earth to the b- terminal Cheers Craig

[@xMizeryz]

hey guys, ive hooked the power cable for my shunt up to a fuse block. the screen for the display turns on and off all the time and i haven’t got anything connected to the anderson plugs that are connected to the fuse block. does it turn on and off because the shunt it picking up that the fuse block is powering the screen? thanks

[@KickAssProducts]

G'day there,head over to our support team & they will guide you in the correct direction,once the unit is set up correctly they are amazing,our customer service team will give you a hand,here is a link for you supportportal.kickassproducts.com.au/ Cheers Craig

[@damo66633]

Had my shunt running fine until I had no loads on the battery for a few weeks and no it just says it’s got 3% and keeps alarming how do I reset the shunt.

[@KickAssProducts]

G'day damo,try pressing & holding the top arrow on lhs of the unit & that will reset it Cheers Craig

[@damo66633]

Thanks mate just done that and it has sorted out the issue

[@The_D_Train]

Hey so can I run this on my lithium battery? Non KA…

[@KickAssProducts]

G'day mate,for sure that's what it was designed for as not all manufactures include bluetooth & monitoring capabilities in there batterys like ours do thanks for watching Cheers Craig

[@gettingaroundaus]

I see on the website there is optional 5m cable but is it something that needs to be purchased? I can an option to buy it

[@KickAssProducts]

G'day,here is the link for the 5 meter extension cable www.kickassproducts.com.au/buy/remote-display-unit-5m-extension-cable/KARDUEXT5M

[@gettingaroundaus]

@@KickAssProducts thanks 🍻

[@nylippman]

Can I use this monitor on a lithium battery?

[@KickAssProducts]

Sure can if you have another brand of lithium battery that has no connectivity built in then it will be spot on Thanks for watching Cheers Craig

[@michaelfoster2593]

Can you just run it straight off the positive and negative off the battery?

[@KickAssProducts]

Absolutely,hanks for watching the video cheers Craig

[@michaelfoster2593]

Do I require a extra negative joiner if running 2 x120 battery’s?

[@xMizeryz]

how can you run a whole bunch of accessories off it from one place?

[@KickAssProducts]

G'day, the shunt measures the amount of current flowing in & out from the negative side of the battery,just connect all your earths as you normally would to the 2nd terminal on the shunt & bob's your uncle :)

[@palma8120]

No instructions in box ????

[@KickAssProducts]

G'day Palma,all instructions are on web site sorry,just trying to do our best environmentally & keep it electronic - here is the link for you www.kickassproducts.com.au/assets/pdf/KABTRYSHUNT-USER-MANUAL.pdf? cheers craig

[@thelonewolf666]

pity it isnt a color display

[@KickAssProducts]

G'day mate ill let product develepment know about the request & see what happens,unfortunatly there would be a price increase as a colour display does cost more bucks Thanks for watching Cheers Craig

[@stephend2662]

too fast and not enough attention onto how to actually wire the thing up. even after wathing it a few times still not clear to me. slow it down, step it out. you are not there to sell the shunt - just to help people install it! IMHO.

[@KickAssProducts]

G'day Stephend,the video was a product info video not an install ,sorry about my lingo mate i often get told i talk to fast,the instructions for install are on the box just scan the code & it takes you to the set up instructions & how to enter all the ifo into the display unit, Cheers Craig

[@steveherwig4353]

That no way thats a 500amp shunt ,, all fake

[@KickAssProducts]

G'day Steve,definatly not fake mate,thanks for watching appreciate it Cheers Craig

[@djmini2numpty141]

mmm metal head looking dude with funny hat selling batteries ?!?! doesnt strike me as inspiring, just saying lol

[@KickAssProducts]

C'mon mate, works for slash lol Thanks very much for watching the video Cheers Craig

[@spacewizard69r96]

The main reason why I’m buying kickass products 🤘😂