King Starboard Applications as seen on Ship Shape TV
Пікірлер: 23
@devenburnham7179Ай бұрын
I’d like to see an update! I bet their facility has tripled
@chronicawareness99865 жыл бұрын
awesome stuff. i could think of many many applications for this stuff! imagine a starboard micro skiff or small boat.. reminds me of a company called polycraft
@chronicawareness99863 жыл бұрын
@Adriel Nathan lier
@Surfman3743 жыл бұрын
Love this
@Whalermansteve845 жыл бұрын
I have a 1966 13 ft whaler ans I did some measurements and found if I get 3 sheets is 3/4 53x24 starboard I’ll have enough to do 2 boat seats , the rails that the seats fit into plus the front storage locker. May just do this soon. Considering mahogany is way more expensive and harder to maintain
@BoatOutfitters5 жыл бұрын
Hey Steven! Starboard would be a GREAT option for this project! It will definitely be easier to upkeep and much more cost effective for you. Please feel free to reach out to us at (866)-633-7961 and we can help answer any questions you have and get you started. :)
@BoatOutfitters5 жыл бұрын
Let us know if you need any assistance with this project, Steven! We are glad to help out in any way :)
@Surfman3743 жыл бұрын
I love this
@Nozlnut1333 жыл бұрын
I'm making a table top. This material is a little slick. What can I do to rough it up to give it more of a non slip surface?
@BoatOutfitters3 жыл бұрын
I would recommend giving our customer service team a call at 866-633-7961 to discuss the best options for your project! :)
@stephenlnoe4 жыл бұрын
Is the material a load bearing material like for a bow pulpit? Or use under an anchor roller for support?
@BoatOutfitters4 жыл бұрын
Hey there Steve, when it comes to King Starboard, the material is not load-bearing and would require additional stability. Without additional support, even thick starboard would flex/warp under the weight of the anchor or people walking on it over time. If you have any other questions, please don't hesitate to ask or reach out to us at (866)-633-7961! :)
@stephenlnoe4 жыл бұрын
@@BoatOutfitters thank you
@gregorysherman650 Жыл бұрын
That's the stuff Marty uses on his video's.. Zoffinger..
@gregorysherman650 Жыл бұрын
I gotta get me some if this for my Jon boat the center console I'm building......
@JH-zi9jh4 жыл бұрын
Would starboard work for a jon boat transom?
@BoatOutfitters4 жыл бұрын
Hey Jeff, it may work for very low HP, but we recommend using Coosa board! :)
@MrMedicAdnan4 жыл бұрын
Can you cut this with jig saw or circular saw? Also, can you round the edges using a router or a power sander?
@BoatOutfitters4 жыл бұрын
Hey there Adana, King Starboard can be cut with a variety of blades! If you are cutting long straight cuts, we recommend using a circular saw or table saw. Use a sharp carbide blade with a high tooth count (min 60 teeth for 10", 40-teeth for 7.5"). If you are cutting smaller, more detailed cuts, then a jig saw or band saw is recommended. With these, use a multi-purpose blade with a high tooth count (min 24 TPI). As for rounding or finishing the edges, you most certainly can use a router! This will give you the cleanest finish. You can also use an orbital sander, however, the grit from the sandpaper can produce small grooves and stroke marks. If you do go with a sander, it is recommended to use 100-150 grit paper...the smaller the better. Also important to note, it is NOT recommended to sand the SURFACE of starboard as it will leave non-uniform texture and you can visually see the strokes. If you have any other questions, please don't hesitate to ask! :)
@norml.hugh-mann Жыл бұрын
You can even fine tune sizes with files
@fsommer14 жыл бұрын
This stuff is cool, but very pricey.
@BoatOutfitters4 жыл бұрын
Hey there Fred, we agree that it is more on the pricey side. However, the price 100% reflects the quality of the products we offer on our website :) If you ever have any other questions, don't hesitate to give us a call at (866)-633-7961
@bobbobbly79004 жыл бұрын
I'm just stating renovating my 20 ft yacht and dollar for dollar, this stuff is brilliant. It can be a bit harder to obtain in New Zealand but I've already fashioned cupboards and a bulkhead,,easy to work, no grain to worry about and smooth as'