Kingrinder Deep Clean | Kingrinder K6 | 汉匠K6 深度清洁

[@JavierHerrera-od4ti]

This was a great tutorial, thanks!

[@bonjourkim3815]

👍👍 Best explanation video!

[@이상진-f4m5f]

가장 설명이 정확합니다 감사합니다

[@maksymilianreiter3111]

very nice video. but does such disassembly not change the alignment of parts? like nr 30 click is no longer as coarse because it moved a few clicks etc

[@TRcoffeeX]

for my own case, the alignment dint change when assemble back.

[@maksymilianreiter3111]

@@TRcoffeeX ok cool thank you! Im waiting for my K2 and want to take good care of it

[@datdatnewkid3045]

My hunch is that if you're careful then grind settings wouldn't change since you set it at the highest click before disassemble and will be at the highest click after assemble.

[@RafaelMartinviagens]

Tks so much!🚀

[@wetravellah4964]

Thanks

[@DavidTorrez]

Can you make a video on how to adjust the K6? I have it but i still don't know how to adjust it 😢

[@TRcoffeeX]

Ok, will do it later night and post immediately. But it is just about turning the holder like in the video.

[@DavidTorrez]

@@TRcoffeeX thanks I really appreciate it. I think I did set it right but I would love to check a video about it to make sure I got it right.

[@TRcoffeeX]

@@DavidTorrez new video uploaded kzbin.info/www/bejne/p6e5Y52Kqd19aqssi=8YZsWllkPtMBI2FO

[@andrewlambert5095]

Factory set is true zero turning it tighter those few that you can risk damaging the burr set. Done deliberately by Kingrinder as safety buffer. Never adjust the adjustment nut. I turn mine out to largest setting before deep clean and leave it same when putting it all back together and grind sizes stay true. I emailed Kingrinder themselves and that's the information I got back from them. Their webpage also has a lot of useful information

[@robertcallaway3821]

What you mean by highest click? Could that mean 200 or 120? What number would be? Thanks

[@TRcoffeeX]

Official highest click shld be 120 for k6. But there is some spares click for my model. So you turn until u feel obstacles then stop. Do not over do it

[@dare2memory]

😀

[@stealthyjun]

Thanks, you saved me $100. This video convinced me this is not for me.