FFT Review of new Oscilloscope from Uni-T UPO1204

This video 'FFT Review of new Oscilloscope from Uni-T UPO1204', I will demonstrate the FFT functions and point out some things that I think can be improve on with firmware updates. #upo1204 #unitrend #howtouseFFT #FFTreview
UPO1204: amzn.to/49Rdea7
_____________________________________________________________________________________________
Your support is much appreciated;)
Patreon - I really do appreciate your support? This support helps me purchase the equipment I use for testing a reviews.
Patreon.com/KissAnalog
Send your one time donation to PayPal at: [e-mail]
Link to T-Shirts and more: www.redbubble.com/people/kissa...
_____________________________________________________________________________________________
pt.aliexpress.com/item/100500...
es.aliexpress.com/item/325680...
www.aliexpress.us/item/325680...
Our official website for updating firmware: www.zotektools.com
Kaiweets store: Get 15% off; discount code KA15: kaiweets.com?sca_ref=1269738.glN6S8aePH
Please use links that cost nothing extra but will help support the channel:
Oscilloscope links:
GW Instek MDO-2204EG: amzn.to/3Vo6UzW
GW Instek MDO-2204EX: amzn.to/3rvY7PKICEpower
MicSig Oscilloscope: amzn.to/3B4DcXe
Picoscope 3403D: amzn.to/35UytvC
MicSig Differential Scope Probe: amzn.to/3HvRG4A
Owon clamp meter: amzn.to/3N9LhB3
Picoscope 4444: amzn.to/3AYJzfu
OWON XDS3064AE 14 bit Oscilloscope: amzn.to/42junoK
Multimeter links:
KPS DMM9000BT Multimeter: amzn.to/3NHdSOl
Hioki DT4256 multimeter: amzn.to/3idmexS
Hioki DT4283 high end multimeter: amzn.to/3vCtSe8
ZOTEK ZT-702S Handheld Automotive Oscilloscope Multimeter: amzn.to/3HdG9Zo
Borbede BD-99: amzn.to/3DRgUbZ
Klein MM700 multimeter: amzn.to/3vm8JR3
Fluke 87V link: amzn.to/3l4QUCq
Fluke 117 multimeter link: amzn.to/3oS2Dnx
testo 760-2 multimeter link: amzn.to/2JRRS5S
FLIR DM93 multimeter: amzn.to/3ebyASF
Kaiweets HT200B AC current clamp: amzn.to/33e3czt
Kaiweets HT206D AC/DC current clamp: amzn.to/2HzYLHO
Kaiweets HT118E: Link to Kaiweets HT118E: amzn.to/3Uz6UeJ
Amprobe AM570 multimeter link: amzn.to/3eurd8S
Zotek multimeter: s.click.aliexpress.com/e/_dSJ...
AliExpress Store: bit.ly/3fkMlPb
Link to Power Supplies:
Matrix 3 output: amzn.to/3MAmwxE
Matrix 32V 10A: amzn.to/41Qcmzb
Nice-Power 30V 20Amps: amzn.to/3qX3NEG
ITech 60V/8A/180W:amzn.to/48Mo9kA
ITech AC power supply: amzn.to/3NVj29M
ITech Electronic Load: amzn.to/3HeTyQR
Matrix LCR meter: amzn.to/48qxJd2
Amplifier Links:
125ASX2: amzn.to/3Taksx5
ICEpower 125ASX2 (lower cost): ebay.us/NPZUWK
Power Supply (looks better than the one I have): amzn.to/3pgfQsp
Enclosure for Class D amp project: ebay.us/ETpmJx
TPA3255 Amp board: amzn.to/3H9uniH
TPA3255 Amp board: amzn.to/3zVBt65
Power Supply for TPA3255: amzn.to/3TSG8Bl
Class D amp project: ebay.us/ETpmJx
Thermal Camera Links:
IR Thermal Camera: amzn.to/3J92LJu
Infrared T2S Plus: amzn.to/3PhxMAJ
Infiray P2 Pro: amzn.to/45Q3Ukw
Topdon TC002: amzn.to/45OHcJr
Links to power stations and LiFePO4 batteries:
Use this link：www.pecron.com/products/pecro...
5% Discount Code: KISSE600LFP
Vanpowers SP200 Foldable Solar Panel: bit.ly/3TLc74y
Vanpowers SPP1500 Portable Power Station: bit.ly/3TI3tUe
Vanpowers:www.vanpowers.net/
Please use this discount Code for the Vanpowers Super Power Pro power station
5% OFF COUPON - Code: KissAnalog
Link for Redodo LiFePO4 battery: www.redodopower.com/?ref=%20K...
use discount code【KissAnalog】
Link to Ecoflow River 2 (great price): amzn.to/3OodDsT
Link to Goldenmate LiFePO4 battery: goldenmateenergy.com/products...
Link to GoKWh battery: gokwh.com/gokwh-12v-100ah-lif...
-Exclusive count code (valid for two months): kissanalog12v
Link to GrenerPower Battery: amzn.to/3R9u5Ok
VEVOR Pure Sine Wave Inverter: US: s.vevor.com/bfQq70
Use the code "SAVEMORE5" for a 5% discount.
Miscellaneous :
Omicron Labs equipment (I am not an affiliate - unfortunately;) www.omicron-lab.com/products/...
WORKPRO 12 in 1 screwdriver: amzn.to/3vVO31N
Insulated Screwdriver set: amzn.to/3NZo0B5
Erickhill ES100 sound pressure meter: amzn.to/3LBW46l
Wild Badger Chain saw: amzn.to/46rtqNB
chain lube: amzn.to/48UcC3u',

[@vintageaudioreview]

Very nice review and hopefully they will update the firmware to remove the bugs you pointed out. Another piece of gear to add to my Wish List....

[@KissAnalog]

Yes I hope so! Thanks!!

[@gregwmanning]

The Uni-T scope sits nicely on the Quant. You need more bench!

[@KissAnalog]

LOL - you are right;) I'm going to organize my bench ;)

[@xiaohui7083]

Great review! 👍 As you set the time base to 200ms, the data collection time is about 2.8s, so the FFT refreshes slowly. if you set the time base to 1us, at 50MHz Frequency , it will update fast. 😀

[@KissAnalog]

Thanks for this feedback! Yes, the lower frequency content is slow to update;)

[@Amplified208]

Man that is an awesome scope i would definitely love one of those on the bench ... Great video and the video editing is definitely improving well done ...

[@KissAnalog]

Thanks so much! Much appreciated!

[@Sctronic209]

Have you done a video on the design cycle from idea to building the circuit up. Given a problem how do you go about solving it?

[@KissAnalog]

Thanks for asking. I do have a series (playlist) on a design:) Here's a link: kzbin.info/www/bejne/j6ecmoF9rc6emrc

[@Sctronic209]

Great content

[@KissAnalog]

Thank you!

[@VIPINSAINI_20]

ANOTHER NICE VIDEO

[@KissAnalog]

Thanks again!

[@qzorn4440]

Thanks! The Uni-T UPS1204 is a most impressive instrument. 💫 Harmonics is a real concern on the factory floor. VFDs can cause many hours of hunting down either bad or poorly installed units. It is not enough to check voltage and current on VFDs and inverters. Better scope-multimeters with a harmonic and PF mode is my wish. Because the line harmonics might cause dirty line power and overheating other devices? PS. I just downloaded KiCad 8, it adds the ability to import full projects and libraries from EasyEDA. 💥 Great video.

[@KissAnalog]

Thanks so much for this feedback! Your generosity is much appreciated. There are nice meters like the Hioki and the KPS that filter out the noise so you can see what you get with and without the filter. Hioki lets you change the freq for the filter.

[@qzorn4440]

Thank you. @@KissAnalog

[@HEMUG_TECH_07]

Oscilloscope machine is best,nice video sir 👍

[@KissAnalog]

Thank you!

[@versace885]

Hi Eddie, I really appreciate such a great informative video and your time it took to make it. Thank you…😁

[@KissAnalog]

Thanks so much!

[@Sctronic209]

👍👍

[@KissAnalog]

Thanks!

[@sureshkumar-vr1hh]

❤❤❤🎉

[@KissAnalog]

Thanks!

[@andymouse]

Please clear your desk and start a project because this is 40 mins of talking about a scope nobody cares about any way, its a budget entry level scope like all the others and we know what they can do. You have been asking why the channel doesn't grow and its because you don't do anything like projects with breadboards and build PCBs stuff like that which will grab interest. Your a diamond guy Ed thats clear for all to see but your videos have no content at the moment, I mean 60hz noise, mains cables and scope specs are dull as dish water. If you want to talk about FFT then talk about how to read the data not what the scope can do and if you do the math with an '8 BIT Scope' your cant actualy see much below -48dB anyway !! I want the channel to Grow !!!!!!.....cheers.

[@KissAnalog]

Thanks so much. Not everyone has your knowledge, so I'm really drilling this in. I also am getting soooo bored of this - but I'm going to do one more to wrap it up - and then we will know what a low freq switcher power supply will look like. And then we will jump to the PFC converter and move forward. This is the 100 and 200 classes in university - but the 300 and 400 are coming:) I think I have to do this from what I see in the comments. I want everyone to be caught up - so just one more video ;)

[@andymouse]

We all want you to do it Ed we want you to be the highest paid youtuber, we want your experience Lets get this power supply past PFC and into Kicad I would gladly engineer your PCB but I can't design the SMPS on my own I need you ! LOL !! :)@@KissAnalog

[@Hellhound604]

I do NOT need another oscilloscope…. I do NOT need another oscilloscope… I do NOT need another oscilloscope.😂😂😂😂

[@andymouse]

You don't need the one you got !

[@Hellhound604]

@@andymouse One???? You mean 7??? (4 pc-based) and 3 benchtops

[@andymouse]

I'm trying to make you go cold turkey and not buy any more !! :) you have the same issue as me to many lol!@@Hellhound604

[@KissAnalog]

So funny - thanks!!

[@andymouse]

So many ! I will see you at the same addiction clinic @@Hellhound604

[@peteb2]

Kinda unfortunate the product was released with something not tested & working properly. Understandable in that the math is complex. I guess it points to the way the programs & their algorithms for this to run on the final product have been written. These days manufacturing such equipment you just have to put everything through a live simulator almost as you go to test everything otherwise you end up with flaky stuff like this & disappointed customers!

[@KissAnalog]

Thanks for your feedback! Yes, but honestly - many scopes - especially new releases have some issues that are later corrected by firmware updates. I think many of us remember the days when Microsoft Windows seemed like a testing environment to weed out the issues - so many thought we were Beta testers. Recently I asked for a new Tektronix that had won some awards (but later when I looked into this I couldn't see where the awards came from;) and this had major issues (a $27k scope). It took a few months but they made the corrections. My Siglent has a flaw in the FFT that will never be corrected because they came out with the -e line and stopped supporting the version that I have - which was the higher cost version.