KitchenAid 7 Quart Pro Line Stand Mixer Review

[@stevejava4336]

Exactly the type of review I was hopping for. Knowledgeable and to the point. Within the first 4 minutes of the video all the key features of the Mixer were covered. Allowing the viewer to decide if this is the right video to watch or not. The rest of the video gave an excellent demonstration of the use of the mixer. As a bonus I learned a new cookie recipe! Thank you.

[@bestkitchenreviews]

Glad you liked it 😀

[@stuarthall2508]

This is the best review I have ever viewed. Before I buy something costly, I check reviews from multiple reputable sources. I am very confidant in purchasing the pro line mixer. thank you.

[@bestkitchenreviews]

Glad it was helpful 😁

[@bruna_d]

I just got my KitchenAid Pro Line with DC motor and i was very worried about the clicking sound. Now i'm relieved !Thanks a lot!!!!!!

[@odecasa4057]

Hi there, Bruna, how are you? I just got mine and worried about the weird noise ... Is it normal? You know, that "plank" noise at the "elevator".

[@Kwakattak]

A very appropriately named channel. No unecessary commentary, just useful information nicely edited. Subscribed.

[@bestkitchenreviews]

Much appreciated!

[@sashineb.2114]

This mixer is so quiet, even on the highest speed. Thanks for your very thorough review.

[@bestkitchenreviews]

😁👍

[@guitarcomet5]

I ordered this exact model (yes, a red one!) before watching this video. After seeing your video, I am confident I made the right choice. The few poor reviews on Amazon are still worrisome on my mind, but now at least I know what to expect and will be able to tell (by ear) if there is something wrong. I used a 22-quart Hobart mixer every day at work for 20+ years, so this is a dream come true for my home kitchen. So many hours reading reviews, examining specifications, comparing models, evaluating my needs and justifying the cost of such an appliance…I finally pulled the trigger. Thanks for your review…very satisfying!

[@bestkitchenreviews]

Thanks for sharing 😁

[@elviraraff6809]

There are just two problems with this machine and one is from lack of use and the other is overheating it. The speed controller is not like the earlier machines and if not used often will become glitchy. You can buy new controller for around $75 but if you unplug the machine and run the switch back and forth between Off and 10 about 20 times you will usually clear the contacts and it will work normally again. If you overwork the machine there is a thermal fuse that will burn out and that will need to be replaced. Kitchenaid doesn't offer a replacement but you can find these online and a video to show you how to replace it.

[@7heRedBaron]

My mom gave me her KitchenAid stand mixer that is 30 years old, but you wouldn’t know it didn’t just come out of the box. I have thought of upgrading it, but I cannot overcome replacing something that has nothing wrong with it, not even a scratch. It’s more a part of the family than some individuals in the family. When QVC had a clearance on the KA multicookers, I jumped on it. It even matches the mixer. Similarly built like a battleship. Neither are WiFi connected, have a touchscreen or a camera. Isn’t that great!

[@PaulaAllenPaulasPlace]

7heRedBaron Used an older model at work for years.

[@russ5024]

I feel the same way about my 35+ K-45SS

[@__2561]

I LOVE this review. Straight to the goddamn point, no bullshit. These kids talking non-stop trying to sell other crap on their "channels", smh, you are an asset to YT, thank you!

[@bestkitchenreviews]

Thanks so much for the wonderful comments 😀👍

[@AM-pc3yd]

you make very clear and crisp videos . great job

[@bestkitchenreviews]

😀👍

[@glossierglossier6939]

Great review ! Im considering this one and pro600 6qt, they said DC motor has 5 year warranty instead of one year warranty for the rest. But read some comment on amazon, ppl said its only one year warranty and got to buy another warranty

[@ruthann8111]

Very helpful. Great review; to the point, but with enough detail to really see the machine in action. This machine also comes with an accessory you can purchase - 3 quart bowl and special beater for small batches. Thanks again!

[@bestkitchenreviews]

Thanks 😀

[@philipwebb960]

You can also buy 5, 6, and 8 quart bowls that will fit the 7 quart mixer and, unlike the 3 quart bowl, will work with the beater, etc. that came with the 7 quart mixer.

[@fredreed8013]

Thank you Ann and also Phillip for the information on all the bowl sizes available to use with this mixer… it really helped me make my decision.

[@jerryparisi2885]

This Review Was Just What I Wanted To See. Thanks. I'm Now Going To Buy A Kitchen Aid 7Qt. Stand Mixer! LOL I Bake Bread About Once A Week With My 4Qt Tilt Head KA Mixer, With A 7Qt I Can Double My Recipe Of Bread. My Mixer Will Out Live This Old Man! My Grand Daughter Will Love It. LOL

[@bestkitchenreviews]

🤩

[@justdi3347]

Great review, I just purchased my proline series and received it yesterday. I am looking forward to trying your recipes. I had the 5 qt. for about 5 years, but the gears got messed up, I'm pretty sure it was my fault in mixing my bread or pizza doughs. We felt it was better to just purchase the Proline series due to the $300 off sale going on. So now I look forward to using it. You mentioned a site for your recipes but I don't see it in the links above. I especially want the pizza dough and it you have any great bread and pasta recipes I could follow too. Thank you so much.

[@CatholicChickAZ]

Same thing happened to me with the 5 quart. I was making 2 batches of choc. chip cookies and blew the motor. So I'm thinking of buying this one so it can handle the 2 batches.

[@PaulaAllenPaulasPlace]

We have a tilt one at work. Bought it at a pawn shop. Never been used $150.

[@russ5024]

Hope you are getting plenty use out of it! Lucky find!

[@Navigator777777]

When you called out the "clicking noise", I subscribed. The noise was bugging the you know what out of me. You have beautiful hands....that said, loved your review. I think I'm in love...with the KitchenAid 7 Qt Pro Line Stand Mixer. ;-)

[@bestkitchenreviews]

Awesome! Thank you!

[@embazle]

Really awesome presentation! Thanks for reviewing! 😊

[@bestkitchenreviews]

My pleasure!

[@hebab6956]

So methodical, love your in depth reviews ... can you review and compare Kenwood mixer to this one ?

[@bestkitchenreviews]

I will try 😀

[@CShannon1991]

Awesome Review of this KitchenAid Stand Mixer Anita!!!

[@bestkitchenreviews]

Thank You! 😀

[@smsstuart]

Thank you for another great review. Clearly, the capacity of this mixer is large, but in terms of its footprint and overall height, it's exactly the same size as the Pro 600 bowl lift mixers. The only physical difference [besides the beaters, whip, etc.], is the *height* of the bowl.

[@russ5024]

This mixer is a much quieter unit, than the Pro-600. This one has a DC motor which is supposed to be more durable and longer useful life. Hopefully owners of this mixer will comment .

[@ciaomamabella]

@@russ5024 Yep, I just got one, and you are right. The difference between them is the 6 qt has a larger, louder motor, goes by watts and weighs 30 lbs. The 7 qt has a DC motor which is a LOT quieter, it goes by HP (horsepower) instead of watts, which is about 1.4 HP. It also weighs less than the 6 qt- 25 lbs-so actually LIGHTER. From what the saleswoman told me on the phone when I was purchasing, the reason for the weight difference is because of the DC motor is more efficient and weighs less. Ive read quite a few complaints about the PRO series, but Ive also read a lot of amazing reviews too. For myself and what I need a large capacity for, I LOVE the 7 quart PRO series. Its pretty amazing. The next size up is a HOBART 20 quart and those are like $5k-20K. Ill stick with the largest 7 quart for $700. :D

[@russ5024]

@@ciaomamabella There is also a KitchenAid 8 qt model it too has a DC motor.

[@bl6973]

smsstuart The whisk also has more wires so you can actually beat faster.

[@Teresa-K]

Very good demo as usual. Mixer looks very efficient! Positive is it has a large bowl. Merry Christmas!

[@bestkitchenreviews]

Merry Christmas, Teresa 😀

[@paulwharton1850]

Excellent review, so clear and helpful. Many thanks......all the way from London !

[@bestkitchenreviews]

Glad it was helpful 😀

[@butter_m4949]

Thanks for the review! I have one arriving in 2 days and I’m very anxious, so thanks for the reassurance!

[@bestkitchenreviews]

👍

[@ethansteiner]

Great review and happy holidays!! I hope you have an awesome Christmas!

[@bestkitchenreviews]

Thanks! Merry Christmas 😀

[@chickenlips605]

Another great review-you rock them! I have this in medallion silver, color exclusive to Williams Sonoma. But that candy apple red is something else:). I don’t use mine too much bit purrs like a kitten and is smooth. Many say there is a clicking noise on theirs. No gray residue in my bowl. After using the bowl lift and for as little as I use it, I think I would prefer the tilt head. The Proline series has a fantastic warranty!

[@bestkitchenreviews]

Thanks for sharing 😀👍

[@CShannon1991]

Jen Kann For how many years does the warranty lasts?

[@chickenlips605]

Cj Smart All of their Proline series appliances, including this mixer, has a five year warranty. I have a proline toaster and I had to have it replaced twice. They did so with no problems. Just be sure to register it when you get it.

[@anthonykirkendhall4344]

Great review. I wish you had completed the butter cookie baking process.

[@agleisberg1aaa]

I find when making dough for bread sometimes the pin on the attachment arm likes to walk a little loose making the dough hook hard to remove. A slight tap on it with a plastic punch and a hammer reseats the pin but can be frustrating if you don't know what is going on or how to remedy it. That's been my only issue with the mixer otherwise I love mine. I got the cast iron black one directly from kitchenaid and the paint is perfect on it.

[@phyllisweaving13]

I have this problem on my Classic, is there a fix. besides the hammer.

[@agleisberg1aaa]

@@phyllisweaving13 I used a small clamp and pressed it back in. Takes a bit of strength though but it hasn't come back out

[@bestbananabread6023]

Thanks for the great review!! Really thinking about getting one of these!!

[@bestkitchenreviews]

👍😀

[@patticake5311]

Thanks for the review, and happy holidays :)

[@bestkitchenreviews]

Happy Holidays! 😀

[@Renilou2]

I read a review that claimed the ceramic started chipping off the beater & getting into the foods within a few months time. I wish they would use simply stainless steel. At the huge price, its the least they can do.

[@philipwebb960]

The chipping doesn't happen unless the beater or dough hook gets hit pretty hard, dropping it on a hard floor for instance. Nothing you would put into the bowl to mix would hit the beater hard enough to chip the nylon coating. You CAN knock the beater around hard enough outside the bowl to chip it, but the chip obviously wouldn't get into the bowl. The nylon coating on my 39 year old flat beater is chipped in a couple of very small places, but I know when it happened (I dropped it twice). If you want them badly enough, you can buy a stainless steel flat beater and dough hook made by either KitchenAid or a third party.

[@russ5024]

@@philipwebb960 Well said! KitchenAid now sells stainless steel flat beaters, dough hooks and wire whisks for most their machines

[@alexblaze8878]

I’ve had the proline version for 14 years and have never experienced what u describe.

[@LeahLeah222]

The dough hook on this pro model is much better than the hook that comes with the classic models.

[@russ5024]

The dough hook provides a different kind of kneading action that is possible in the larger bowls of the 6, 7 and 8 qt. that have more powerful motors. They get kneading done almost twice as fast (half the time) of the dough hooks that were standard with 4.5 and 5 qt models sold during the 1960s and 1970s. Artisian stand mixers now come with dough hooks that have a slight 'spiral" to knead doughs in less time too.

[@cherryberry9468]

Russ Thanks for the info! I didn’t know that.

[@bl6973]

Russ The J hook kneads off the bottom of the bowl which is basically how a typical person kneads, while the C hook kneads off the sides. Not only that but thenwhisk can really get into the sides because of the way the wires are bent.

[@mariawilson6284]

My husband got me this. So excited1 Would love to try pizza dough. What was the ingredient amounts and all?

[@tootsnoname8586]

I love the thorough instructions. Would you please state your opinion on the Kitchen aid 7 qt proline vs Bosch?

[@leolagraves1002]

GORGEOUS! I want one!

[@bestkitchenreviews]

😀

[@bettyr2319]

That was a great thorough review thanks.

[@bestkitchenreviews]

👍😀

[@sashineb.2114]

Nice review, thanks. I wonder if KA having removed the spring and washer from the attachment shaft is what contributes to the clicking sound (perhaps, if the attachment is rattling a bit). Hope you're happy with the mixer. It looks very sturdy and powerful.

[@cnnw3929]

Another fabulous review that I had overlooked. This mixer works well in all the tasks you handed to it. Your soft pizza dough looks perfect. Thanks!

[@bestkitchenreviews]

Thanks 😀

[@1911beauty]

I love my ka pro 7. I would prefer a heavy non breakable plastic or better still, a stainless steel version wud be perfect

[@Delekham]

At 4:06 When she raises the bowl how the paddle attachment raises it is no longer in the Locked position. In older models they had a spring to compensate for this. KA has announced that "the Spring is Not Necessary". We see here how this makes the bowl attachment "Walk" and clatter alot...making the motor work harder than it needs to. IF the Spring were still in use the torque would be even all through the mixing process. Edit: I watched at 1/4 Speed and literally could see the pin moving back and forth from the "LOCKED" position at 4:16 (At 1/4 Speed on YT) I couldn't even see the the "Dowel" that holds the attachment in the Locked position is definitely not where it is suppose to be. My theory is that KA removed this one crucial piece to save money and to sell replacement parts. The worm gear and planetary gear are the most common failure and I surmise that the continual Torque and then NO Torque is the cause. BTW..did anyone know that Hobart sold KA to whomever and KA has went down hill ever since. I am NOT Sorry about my review of this Product, (even if it is a year old) it only shows the easy things andshould not influence people who want a quality product and get a sub-standard product for the price we all pay. I have a recipe that will KILL all Kitchen Aids! Except for my Classic..which in the end gave up the ghost eventually it served me well and it has the Spring loaded Spindle, I just bought a Pro 5 Lift model (without the Spring loaded Spindle) 2 months ago..it overheated twice on the same batch, and is now leaking grease in my dough! Needless to say it is going back. Bad Form Kitchen Aid!!!

[@sashineb.2114]

I agree about the necessity of the spring on the tool shaft. I saw another video where the paddle flew off the post when the mixer was stopping. I have a KitchenAid from the 1980s made with the Hobart specs, still going strong. I keep hearing that the new KA mixers are not as good, as I hope mine keeps working.

[@jehadghanimah7944]

Thanks for the review I want to ask you if you have any idea how to replace the carbon brushes for this machine I asked many KitchenAid users and technicians but no one of them knows Thanks again and Merry Christmas

[@bestkitchenreviews]

Hi, I'm not 100% sure but from what I found online, you may have to purchase a complete motor. I don't think KitchenAid supplies the brushes for this model or the Pro 600. I would suggest calling them directly to confirm. Merry Christmas! 😀

[@jehadghanimah7944]

Thanks for your response I am wondering that. How long you think the brushes serve in this machine.

[@jehadghanimah7944]

bestkitchenreviews By the way I contacted KithenAid many times (6 months ago) and I have no answer for this particular question. The brushes for this model is available onlie and also I am wondering why not in kitchenAid You can found it for example on this address ( www.ebay.co.uk/itm/Kitchenaid-Stand-Mixer-Generic-Carbon-Brushes-Fits-New-Style-Transmissions/112075093147?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D1%26asc%3D20180213162448%26meid%3D2284a936be8940bbbc39e6c885c2f714%26pid%3D100930%26rk%3D1%26rkt%3D3%26sd%3D122062955516%26itm%3D112075093147&_trksid=p2056116.c100930.m5375) But the question is how to install it ???

[@russ5024]

@@jehadghanimah7944 The upper cover needs to be removed to access the motor of the Pro-600 KitchenAid mixer. This mixer has a Swiss imported motor. The motor brushes would not to be replaced for at least 5-7 years of daily household use.

[@russ5024]

@@bestkitchenreviews You are correct the models with DC motors do not have brushes.

[@tamaraamina8203]

Best review on youtube! thankyou.

[@bestkitchenreviews]

Thanks 👍😀

[@m.e.1040]

Hello, do I have to switch only one step when I want to change the speed? Because I wanted to buy a used HeavyDuty and the machine was mostly stopping when I wanted to higher the speed. I had to reset and then make a new try. Is there something like a savety mechanic or did the seller try to sell me a not working machine?

[@BahamaTropical]

Is this model KitchenAid stand mixer in your video included in KitchenAid's professional line?

[@mirojanki7129]

Hello Can you put the stainless steel bowl on the table?

[@joeytai9465]

How does it perform with smaller quantities? Sometimes I need to whip 2 egg whites and I find the larger mixers cannot reach the bottom adequately enough.

[@dabomb7887]

I have read for that small batches people keep their artisan, or buy the attachable 3 quart bowl for small quantities.

[@philipwebb960]

If the bowl height is adjusted correctly, it will mix whatever you put into the bowl.

[@nwoods4260]

Is this the one that was on America's Test Kitchen and came out the winner over about 8 others? They talked about it being the best because of the torque being able to handle the heavy load. If so do you have the model no?

[@chickenlips605]

N Woods Yes, it was. The classic plus was listed as the budget choice.

[@nwoods4260]

@@chickenlips605 do you have that model no to the 7qt?

[@chickenlips605]

N Woods the candy apple red is ksm7586pca....here is the link for bed bath and beyond www.bedbathandbeyond.com/store/product/kitchenaid-reg-pro-line-reg-7-qt-bowl-lift-stand-mixer/3295625?keyword=kitchenaid-proline-mixer

[@michellemclaughlin5089]

Hi. Will the 7q bowl fit on the 6q mixer?

[@FredMcIntyre]

Thanks for the info! 👍🏻👊🏻

[@bestkitchenreviews]

😀

[@cesarteteko]

I saw a used 7q with great prices but I'm thinking is too large for my usage, can I make 500g doughs without problems? It will stir and mix properly? Thanks!

[@bestkitchenreviews]

500g will easily fit in smaller models. This 7qt can fit 3.6kg dough 😀

[@amfriend1987]

I am looking into getting this model. My husband and I love making homemade maple cream in my 4.5 quart and would like it to make larger batches of it and for the stronger motor, but other than that I don't tend to do "large" batches of things. Would this still work for me for my day to day smaller baking?

[@cnnw3929]

The KitchenAid won't perform like a Thunderbird ARM-01, but it is less than 1/3 the cost, and still offers adequate performance for most users. If you are on a budget, then this one is the one to get as long as you carefully monitor the amount, and the hydration of the dough. As long as you don't work it too hard, you should be all set. But if you have bigger needs, there is nothing wrong with buying a commercial mixer. I'll never regret the purchase of my old Berkel 10 quart, even though I have at least one KitchenAid Commercial 8 and an Ankarsrum Assistant in my collection.

[@zenanton4259]

Hi there, great video. Could you help me with something? I just opened my stand mixer and the "elevator" is making a lot of noise when i make pizza dough, hears like something loose, each spin is one metal beat. It is very noisy. is it normal?

[@mariamkhawaja7942]

Hi, I used my pro 600 today for the first time and it's making more noise than yours. Is it normal or am I doing something wrong?

[@TheOneinthewoods]

My daughter just opened hers and is very unhappy with the high squeal sound.

[@basement_techno]

The pro 600 is a 6 qt mixer, this is a 7 qt. They also have very different motors.. .the 7qt has a DC motor which is much quieter. This is why the 7qt is over $100 more than the 6.

[@mjcj1313]

hi, does machine seem like speed 4, 6 & 8 almost the same and no difference?

[@Gracian40]

Whenever I make Chocolate Chip 🍪 I like to double the recipe. Will the 7 quart be big enough to handle my needs?

[@bestkitchenreviews]

Yes 😀👍

[@russ5024]

@@bestkitchenreviews As long as the total amount of flour does not exceed 9 cups, Be sure to use the splash guard to keep the flour in the bowl.

[@LinA-it9vd]

Does this bowl tilt forward? It looks straight everywhere but mine is clearly tilted forward when raised.

[@russ5024]

Push down on the back of the bowl until it clicks in place. Watch this video starting at 2:50 to attach the bowl to the mixer.

[@Artewen]

Thanks for the great review! That tic tic tic noise when the mixer is making a dough is normal? I have just bought an Artisan Pro 600 and it makes the same noise. And I am wondering whether o not to return it! Thanks!

[@jennyupdike]

I just got the 7qt proline and mine makes the same noise. Did you end up keeping yours or returning?

[@Artewen]

@@jennyupdike nop! They Said that the noise Is completely normal. I have been using ir flor about 2 months now and it Is still working perfectly!

[@jennyupdike]

@@Artewen thanks for letting me know. ☺️

[@helennagl3500]

❤ I like.

[@keisha5147]

what is the going price range on this beautiful mixer?

[@michaelplesch]

Nice video great review.

[@bestkitchenreviews]

😀👍

[@k9m42]

Do you feel the bowl support arms and bowl moves around a lot when needing dough or mixing cookies?

[@bestkitchenreviews]

No, I didn't have that experience :)

[@RamboRoberto2905]

can use to make a pizza dough?

[@bestkitchenreviews]

Yes 😀

[@janstirbens3163]

Where can I find your butter cookie and pizza dough recipes?

[@stephehniarhos3237]

Can you share your recipe for pizza dough.

[@CucinaCasera]

Love it

[@rgruenhaus]

Does this have a DC motor? I didn't see the 1/2 speed on the speeds like the 7qt with the DC motor has.

[@kuyakentv2333]

I think that 1/2 speed is the new one 7qt with an ac motor. This one in the video is the dc motor.

[@rgruenhaus]

@kuyakentv2333 The DC motor of the 6000, 6500, 7 qt, and 8 qt models is significantly beefier than the one of the 600 Series.Dec 8, 2022

[@ndangohsolanche8710]

Beautiful video

[@bestkitchenreviews]

👍😀

[@vectorcollector4893]

How many watts is this particular mixer?

[@bakingwithme1337]

I wonder if color effects the sound? Hmm...

[@bogey19018]

Will this bowl work with the 600professional series?

[@CShannon1991]

No.

[@joseglorival6949]

Valeu, obrigado 😂. Serrinha Bahia Brasil,!?😢

[@DanTheBrit]

Can you tell me if the bowls are interchangeable with the other 6QT you have? I have the 7QT bowl version KSM7 that has the DC motor , but wanted to confirm if the bowls and paddles are interchangeable. If so, then I'll probably get the water jacket KN2WJ as I understand that it fits the 6QT bowl mixers.

[@Aniks0]

Can someone tell me the height of the 7qt bowl and 8qt bowl?... Thanks

[@russ5024]

About 2 inches and have different handles too. 8 qt. bowls are stackable too!

[@philipwebb960]

The 8 quart bowl is about an inch taller than the 7 quart bowl. Otherwise, the dimensions are the same.

[@CShannon1991]

Anita, they have this BRAND NEW RE-DESIGNED 7 Qt Bowl Lift Stand Mixer but this one has a Half Speed so now, that’s a 11 Speed Stand Mixer.

[@bestkitchenreviews]

Great! Thanks for sharing 😀

[@kuyakentv2333]

Well the new one is come with the ac motor and almost half the power of this one.

[@TCPUDPATM]

I’m a single guy. I bought this because it was on sale and now I have no idea what to do with it…

[@perniciouspete4986]

I think you mix things with it. It also makes a very effective doorstop or paperweight.

[@HmongTojsiab-v9d]

I’ll buy it

[@Gracian40]

I use mine quite often to make custards, batter for cookies, muffins, cakes, and pie filling 😊 . I also purchased an extra bowl.

[@ronaldwald1657]

First you must unplug the mixer from the wall outlet. Second there is a screw on the back of the mixer that holds the Kitchenaid band around the top of the mixer. Third remove the 4 screws that hold the top cover in place. Once you remove this cover you will see the motor the motor controller and the gear assembly covered by a plastic shroud. Do not remove this part because you will end up with grease all over your hands. The electric motor brushes are close to the rear of the machine. you will able to see one of the brushes. The other brush is 180 degrees opposite to the first brush. The removal, and replacement of these two brushes is a very delicate operation. You should only allow an electrical technician to replace these brushes. This is the reason why you were not told how to do this. You can also see videos in KZbin that walk you through the steps. If you do this wrong you will probably burn out your motor, and probably set you kitchen on FIRE!! Send it back to the factory. I believe that people should have all the information to make an intelligent decision. DO NOT DO IT!

[@1911beauty]

I don't use it for cakes other than sponge cakes. I think it's to strong for cake batter. It makes cakes stiff by adding to much air. I have ka hand mixer. I use it for 45 sec on 2

[@raphametzger6690]

Whey do you love

[@corneliadragomir-nv2bw]

Preț?

[@ale347baker]

Which is your favorite mixer?

[@sajidhussain7152]

what is the price of this mixer

[@bestkitchenreviews]

Hi, Please click on this link to see the current price: amzn.to/2SeImIX

[@patsylaux7744]

​@@bestkitchenreviews11:27

[@LinA-it9vd]

Sorry I figured it out thanks.

[@Jp22524]

I just kneaded some dough to make Christmas cookies. The dough hood kneaded the center of the bowl, but it pushed up on the sides all the rest of the dough. Why did that happen?

[@yessicamenjivar4380]

Hi i have a question😟 i have a machine like this but the bowl is 5 qt. I need to no if i can use the same machine but with a bowl of 8 qt.?🤔 Please someone help me🙂

[@BALDUINOGUSTAVO]

it is a brushless motor?

[@philipwebb960]

No.

[@BenjaminB.]

5:20 the important cut how to remove the mixer :/, i think this is the worst part of the machin

[@thedude4795]

"a large unit"

[@doroteoarango2806]

Grandioso video tu voz cada vez más sensual felicidades

[@joer1757]

the bowl is simply way to big for most home recipes. I will stay with my 4.5qt

[@livebig247]

Don't be afraid to role up your sleeves...lol

[@tonhan2092]

Kitchenaid has gone way downhill do your research using faulty parts plastic too. Didnt used to be its now quatity vs quality

[@itsthatwutangguy.9370]

wu tang ..

[@SERGIO-cr6uy]

Interesting review but overpriced brand.

[@cnnw3929]

Sure, you can buy a cheap Farberware for $99.00 bucks. But it will never match the quality and capabilities of the KitchenAid Pro-Line 7. But, feel free to buy the cheapie if that's what you feel is best.