I just purchased one today. Sounds great in your video. Hopefully getting it on the Scar 17 wont be to challenging.
@MountLetheHellfire3 күн бұрын
Nice man, congratulations, it is a great can for sure especially since a lot of places have them discounted almost down to 1500 to offset the NFA and transfer tax fees. Never had a SCAR 17 pretty sure getting the muzzle device off isn't too hard
@i_ons3 күн бұрын
@@MountLetheHellfire yep. The deal was too good to pass up. 1373 shipped. I think the barrel profile of the Scar can make issues for the new muzzle device. We’ll see. Glad to finally have a use for this Mams I bought a couple years ago.
@ARegularGuy24Ай бұрын
I have a SR-25 PC. I haven’t shot it yet. But I am looking at getting this suppressor. I also have a factory SR-15 CQB with a Sandman. Great videos man.
@MountLetheHellfireАй бұрын
Very cool, did you get the PC from the latest drops? I think the CRS would be great, Rooftop has a few CQBs but he corrected the price on them to 1984 which really blows. At $1600 the CRS is a steal, don't feel the same about a CQB for $400 more. I've been staying away from the SR-15s for now, I have a FBI SWAT Regional 11.5 clone with ~5000 or so rounds on it, but anytime I see a Mod 2 CQB with the URX3.1 mod I want one. Thanks bro, glad you liked the vid!
@kst8guy0214 күн бұрын
That Aguila is pretty poopoo but I will buy it if I'm running low and stop by academy. I run Hornady American Gunner 140 BTHP through my M110A3 and it's right at $1/Rd from lots of places online. Sub-MOA, 2650 FPS, SD of 15, ES of 45ish. When the Federal GMM Berger 130s are $2+/rd, it's hard to justify the price difference. I'm doped to 1200yd on the Hornady stuff and it's very consistent. I'm with you though the price isn't justifiable from a performance standpoint. It's still probably my favorite gun to shoot though and SR-25s are always the right vibe.
@MountLetheHellfire14 күн бұрын
Yeah the whole system - military contracts and price pressure aside - is overpriced but I still love it and it performs. I think if I had a straight up lemon I may not feel as strongly in favor. A few guys I shoot with recommended the same thing, Hornady Match or Gunner, I see that lucky gunner sells the latter in 200rd packs. Do they use small rifle primers? I had one box of Aguila do really well when I broke the rifle in then quickly it went to shit as I showed in the video. Some of that was me but not to that extent. I keep buying up the FGMM 140s when southern defense or bucking horse do sales on them, the brass is really good and is small rifle primed which is why I like it. I keep meaning to do a run of reloads to pick a recipe now that I have a big pile of brass, it'll save me a little over $1.30/Rd with Berger 140s in them
@kst8guy0214 күн бұрын
@@MountLetheHellfire The Hornady American Gunner uses large rifle primers. I don't reload, but I whipped the calipers out and checked my brass to confirm. The aguila is like all I shot for like the first 600rd because I can only shoot 350yd at home and they worked fine on like 2MOA sized steel gongs or IPSCs, but at any real distance on small targets they're crap. For the same money you can get that American Gunner and of course I forgot about the Hornady "Match" with the same BTHP bullet. The 200 round cases are definitely the way to get the best value and that's what I've been doing. I'm going to snag some more of that today from Scheels and yes they use large rifle primers. I'm jealous of the reloading setup. I don't think I have the patience or the knowledge to do it, but it would be nice someday to dedicate some time to figuring it out and it would make the really good Berger stuff worth shooting, for sure. I'm surprised at how few videos I find on youtube of setups like ours. Appreciate the content, man.
@MountLetheHellfire14 күн бұрын
Ah thanks for confirming. Shit, I may start to just buy the small rifle brass separate or try to trade my LRP and 6mm CM for SRP 6.5CM brass. Yeah for ringing gongs I don't mind, but shooting on paper causes a mental block in me since the shitty group is much more noticeable. I should just learn to ignore or only shoot at steel. I used to shoot a decent amount of competitions on active duty and got into reloading to offset the cost. The mid 2010s were the golden age I feel, all of the tech was really good and prices were still low. I learned on KZbin, I'd grab a RCBS Rock Chucker or Lyman turret and a set of good dies from Mighty Armory and a good scale if you ever got the bug to get into it. I run everything progressive with a lot of automation which is why I'm so anal about the primer pocket size. Last thing I need to do is blow up a stack of primers crushing it into the wrong hole 😂 And thanks man I appreciate that. I'm still getting the hang of this KZbin thing. I need to invest in a better camera setup for live firing soon
@kst8guy0214 күн бұрын
@@MountLetheHellfire Yeah shooting paper for groups turns me into an ammo snob - on steel it's way less important. Thankfully I much prefer shooting steel haha. But man don't make me go down this reloading rabbit hole 😂
@Redbusser40Ай бұрын
Nice! Hopefully mine clears soon ! Going on my MR762
@MountLetheHellfireАй бұрын
Oh very cool, that's going to look great, and probably sound even better. Rocking a G-28/M110A1 style clone or just stock?
@Redbusser40Ай бұрын
@@MountLetheHellfire Stock MR 762. Just can’t decide on the glass.
@MountLetheHellfireАй бұрын
@@Redbusser40 depends on the intended use but hard to go wrong with a NF 4-20 ATACR or a 2.5-10 NX8. Don't even need to go that expensive, some of the mid tier Vortex options and even cheaper there are good high quality buys like US Optics TS 3-12 as well. You have a certain reticle or price point you're looking at?
@Redbusser40Ай бұрын
@@MountLetheHellfire I was thinking about going with 1-8 like atacr or even a Schmidt Bender. Spending money on some nice glass now that we can’t buy anything here in WA.
@MountLetheHellfireАй бұрын
@@Redbusser40 damn that's both good and bad for that reason. Honestly depending on ranges, 1-8 is fine even to 500m if not more. I have a 1-8 ATACR on my Mk12 Mod H and it's got the best edge to edge clarity and color transmission of any 1-8 I've used. I've had issues with tracking on S&B optics, but their 5-25s not their LPVOs. For the $2000-2500 range there's a lot of great choices either way.
@NicholasSherlock-d8gАй бұрын
I put mine on a sig spear 300 blackout I like it but I think ima switch it out for the cat odb
@MountLetheHellfireАй бұрын
@@NicholasSherlock-d8g damn, really? Where are you going to put the CRS now? Or are you getting rid of it? Haven't tried any of the cat stuff I've read good things, may try one on the Draco
@wildmaddy8748Ай бұрын
Hey any update with the G$ MK18 ARCA Rail?
@MountLetheHellfireАй бұрын
@@wildmaddy8748 I just sent off the barrel nut to Centurion, ordered up a 18" SPR barrel from them. Should get it in a week or two, will do at least part of the assembly on video and then do a head to head against my Mk12 Mod H that has a Douglas barrel in it
@wildmaddy8748Ай бұрын
@@MountLetheHellfire Awesome can’t wait for that vid. I’ll stay tuned in.
@هیچ-ك1قАй бұрын
Your Instagram screw?
@MountLetheHellfireАй бұрын
@@هیچ-ك1ق i got banned off of IG 😂
@هیچ-ك1قАй бұрын
@@MountLetheHellfire The output size ofthe bullet of putink suppressor??????????
@MountLetheHellfireАй бұрын
@@هیچ-ك1ق the exit bore diameter is 0.3950 inches and the entrance is around 0.3750 inches. Bullet diameters on AK profiled bullets differ but 0.3080 to 0.3110 inches is the widest part
@هیچ-ك1قАй бұрын
@@MountLetheHellfire ❤❤❤❤❤❤❤❤❤
@هیچ-ك1قАй бұрын
@@MountLetheHellfire thesizeof the Leveling rod?????