Just Heat Up The Motorcycle Chains And The Knife Is Almost Ready!

Рет қаралды 9,578,732

Knives Project

Күн бұрын

Пікірлер: 1 900

@fridgemagnet 5 ай бұрын

now make an motorcycle chain out of old knives.

@lukax1986 5 ай бұрын

hahahahahaha

@FarkJoeB 5 ай бұрын

Make an old motorcycle chain out of a new knife, that'd really be impressive

@emilflognoid1532 5 ай бұрын

That would actually be way harder as a knife is one solid peice of metal and a chain is a bunch of precise peices engineered and bolted together.... you'd be better of just leaving it as a chain in the first place and not making a knife and then making that knife back into a chain.

@joshuareinke2727 5 ай бұрын

🤣

@malayerbacorp 5 ай бұрын

@@emilflognoid1532 El alma de la fiesta. 😐

@sillyentz 5 ай бұрын

When you chopped the bottle and the base didn't even move a bit ... That is scary sharp. Love the paracord grip too. Really lovely craftsmanship there.

@jesper164a 5 ай бұрын

If you look at the bottom, you can see it's been glued to the surface.

@UYC. 3 ай бұрын

Hotglue 😄😄

@Gabriel.1985. 2 ай бұрын

That's still shocking just how sharp he made that, wasn't expecting it. This guy should sell em!

@SafesandGuns Ай бұрын

its fake bro.......lol

@IORIYAGAMI32 Ай бұрын

VIVA PERÓN CARAJO

@blairhunt1424 5 ай бұрын

No music. Thank you for that!!!!

@nihalsingh8950 4 ай бұрын

Yes you are right 😂 👍🏻

@hetfield144 4 ай бұрын

yeah and between 2 choices. Soft Piano HARDCORE TECHNO.

@iheziefavour2472 2 ай бұрын

😂😂

@mark675 2 ай бұрын

You that sensitive huh

@saiftanjiro4330 Ай бұрын

True

@glennsosinske3260 7 күн бұрын

I rarely see anybody finish a blade with a grinder before. You even cut the bevel like that. Fantastic finished product. You are talented for sure.

@IstvanSzollosi-y1w 3 ай бұрын

Jó nézni hogy léteznek még személyek akiknek a,,keze munkájukból''ilyen igazi ékszerek valósúlnak meg.Hatalmas szakmatudás és szenvedély.Gratula!😊

@deufel86 5 ай бұрын

I love how in the end it doesn't look as if it was made from an old motorcycle chain at all.

@KaoXoni 4 ай бұрын

Or a sawchain from butter knives

@Mysucculentchinesemeal 5 ай бұрын

I love the glow of molten metal, so satisfying.

@ourpeople-g7r 5 ай бұрын

I did something similar the other day. I simply heated up a can of baked beans and dinner was ready.

@ItsNeezy 5 ай бұрын

😂😂😂

@russse2793 5 ай бұрын

Was it Bush's Baked Beans? 🍳🍳🍳🍳🍳

@ourpeople-g7r 5 ай бұрын

@@russse2793 Na mate. They were Wattie´s Baked Beans. Really good New Zealand baked beans.👍

@robinbrowne5419 5 ай бұрын

🙂👍

@Steakmassaker 5 ай бұрын

You opened it with this great work of knife, didn´t you ?^^

@Uswesi1527 4 ай бұрын

Absolutely, ingenious design. The workmanship is far beyond description. Thanks

@Watty7878 3 ай бұрын

SMH

@Gabriel.1985. 2 ай бұрын

Very impressive

@IORIYAGAMI32 Ай бұрын

VIVA PERÓN CARAJO

@evolve-officialartist 5 ай бұрын

That knife is off the chain.. literally 👊🏼

@Michaelkaydee 4 ай бұрын

😂

@enderterminator302 2 ай бұрын

😂😂

@jeffreyworthen7033 Ай бұрын

IKR!!!!.... literally...🤣🤣🤣👍👍👍

@jjd1983 4 ай бұрын

Safety glasses anyone?😂 Beautiful work!!

@robertscheinost179 Ай бұрын

Safety glasses usually get worn AFTER the slag gets scraped out of one's eye by the eye Doctor.

@danielanthony9621 5 ай бұрын

Beautiful work and excellent craftsmanship! Im a traditionalist though, would have loved to have seen a hardwood handle. Would have been a 10 instead of a 9. 😊

@waynestevens1654 5 ай бұрын

Defo needed a wood handle

@raptor_il89lv 5 ай бұрын

Guys, the wood handle would break a stile of master 😊 its iron hand! Wood is too soft for man of steel😂 👍👊💪🍻

@dortuhenri5071 3 ай бұрын

@@waynestevens1654😢😢😢😢😢😢😢😢😢😢😢😢

@guardiaoguardiao 5 ай бұрын

Parabéns meu amigo pelo belo trabalho! A faça Ficou maravilhosa!👍🏻

@grozoby 5 ай бұрын

Le métal est une matière vivante et pour le travailler, faut le sentir ! Très belle pièce !!!👏👏😉

@romain8741 5 ай бұрын

😂😂😂 vivant, vraiment ? Si il y a bien une chose qui n'est pas vivante c'est le métal.

@grozoby 5 ай бұрын

@@romain8741 pauvre inculte !!!!...

@Zer0kbps 5 ай бұрын

Taping the chuck key to the power cable is pure wisdom.

@danielandjenny9 6 күн бұрын

My dad used to do that in the 80s when I was little hahaha

@stormracer05 5 ай бұрын

Nice blade, I would be concerned about porosity and inclusions in the steel because of voids between the links. It would be a great candidate for a canister build.

@karlgustav5490 5 ай бұрын

clearly. it's difficult to avoid gaps when making chain damascus. and obviously here, this knife is not sellable because of it.

@jamesmcguinness1530 3 ай бұрын

My other concern is what happens to the rubber o rings in the motorcycle chain?

@MlungisiDlamini-vr5ct 2 ай бұрын

😂@@jamesmcguinness1530

@reneleonciopizarrovalensue1824 5 ай бұрын

Magnífica pieza, Felicitaciones al Artesano, Saludos desde Sudamérica 😊..!.!

@IannisMaragakis 2 күн бұрын

Great craftsmanship. I’m not into knives, yet I find the result most impressive.

@billkorecky4636 5 ай бұрын

At the end of the day it is true art that will stand the test of time using basic old school techniques. You are a master craftsman. Great Job!

@Aikicyoaz 4 ай бұрын

Nah robots will take over

@Technichian462 5 ай бұрын

How Batman is that. Damascus steel knife made from a chain. Nice!

@MayconBTC 5 ай бұрын

O que é o pó branco usado na forja? O bórax (Na2B4O7•10H2O), também conhecido como Borato de sódio ou Tetraborato de sódio é um mineral alcalino derivado da mistura de um sal hidratado de sódio e ácido bórico. Na cutelaria é um dos produtos mais usados como fundente durante a soldagem na forja.

@Mprikiman 5 ай бұрын

He used it for cleaning impurities :)

@fabio146 4 ай бұрын

Vc é brabo. Vim procurar isso

@galdramadur1 4 ай бұрын

Danke für die Erklärung. Super

@marcelosilva1265 2 ай бұрын

O cara é fera , parabéns por tanto talento e sabedoria.

@The_Zilli 5 ай бұрын

Never would have guessed that blade came from a motorcycle chain. Most impressive.

@caught-c9w Ай бұрын

You mean metal It’s metal ffs Now if it was from a daisy chain I would be impressed but I’m not as it’s made from fucking metal like all blades ffs

@evandromedeiros693 2 ай бұрын

Uma linda peça ARTEZANAL💫 Parabéns pela sua ARTE 🙌🏾⭐️🙏🏽

@donnomagyari7070 5 ай бұрын

Gorgeous! I like the chain pattern on the knife.

@erneststanley6616 2 ай бұрын

Great craftsmanship. Very impressive. To think that old motorcycle chains are just rusting away in a garage when they can be converted into something as beautiful as this.

@DK_58 5 ай бұрын

нож кайфовый. главное чтобы волосы на руках не закончились)))

@f1ashroyal Ай бұрын

Не беда, на ногах ещё есть)

@globalservices2490 4 ай бұрын

Très beau travail et pour une fois sans musique merci bravo beau travail

@chopperdeath 5 ай бұрын

Impressive, but will it keel?

@DestinatioNext 4 ай бұрын

😂

@DestinatioNext 4 ай бұрын

😂

@marklee4691 3 ай бұрын

Does the underside of boat have to do with a knife's performance?

@jred726 2 ай бұрын

I see what you did there! Lol

@masoodsayed8810 Ай бұрын

It will cut.

@mattpaissat 4 ай бұрын

Fantastic Craftsmanship. Impressive the base of the bottle didn't move a bit with a clean cut... Shout out from PNG 🇵🇬

@goa5612 4 ай бұрын

Absolut beeindruckend, das ist Schmiedekunst in Vollendung!!!! RESPEKT !!!

@juniormachado6918 2 ай бұрын

Muito bom...profissional raro e experiente...fabricou uma faca como se tivesse brincando... Show de bola Lindo trabalho....

@asifalvi5023 5 ай бұрын

This man beats the steel as if It's being hurt!

@UzairKhan-ct4tq 5 ай бұрын

Ma sha Allah..... Subhan Allah..... Great job done brother l appreciate your work ❤❤❤

@userxyz783 4 ай бұрын

lol .... allah and knives go way back

@devairfavaro 5 ай бұрын

Por isso que deve ser valorizado bem ao máximo pos da um bocado de trabalho..é um trampo de detalhes e vai protico o dia todo pra fazer um exemplar

@federicoyapura2186 5 ай бұрын

Felicitaciones hermoso trabajo artesanal 👍👏💪

@BneiElohim 2 ай бұрын

so satisfaction in watching..thank you.

@kelberwilkercosta1852 5 ай бұрын

Certamente é um artista em lâmina!😮

@DerwinMyers-o8c 4 ай бұрын

Well done sir. I enjoy watching a true craftsman.

@joaomartins10000 5 ай бұрын

Excelente trabalho, mas é perigoso trabalhar com a rebarbadora sem proteção do disco, não vale a pena o risco, mas continue o excelente trabalho pois ganhou seguidor.

@gregoryjohnston6742 Ай бұрын

Fabulous Smith work.

@edwardmacintosh9476 5 ай бұрын

Great job on the knife .you are a craftsman in your trade and I can appreciate your attention to the quality of your work. Tks for the video.

@fabioalexmg 5 ай бұрын

Que trabalho sensacional! 🫡🙌🏻👏🏻

@Dansel3 5 ай бұрын

Erhitzen Sie einfach ein Motorrad und ein Amboss ist fast Fertig ! ; -)

@thejoker-ie1mm 5 ай бұрын

@Dansel3 🤣🤣🤣

@daniellm5630 4 ай бұрын

Superbe travail de MAÎTRE. FÉLICITATIONS !!!

@josue.cs.jo60 5 ай бұрын

É MUITO TRABALHO! MUITA CRIATIVIDADE . HAJA PACIENCIA NISSO.

@defimperia2373 19 сағат бұрын

_Such craftsmanship._ This is why great swords were so expensive, back in the day, and received such honour. I know the metal of samurai swords was folded multiple times which made them so much stronger. When the Japanese surrendered to the U.S. on USS Missouri ending WW2, and the officers handed in their swords, many of those weapons were hundreds of years old. _That's_ workmanship. Marvellous!

@koptagell53 4 ай бұрын

Magnificent workmanship)

@biffski 2 ай бұрын

Thanks for sharing your craft with us.

@George-tz1cv 5 ай бұрын

Nice pattern and as always, great grinder skills.

@Cancel_That 3 күн бұрын

It's so nice seeing someone actually forge the knife instead of forging a billet and cutting the knife out.

@Thadopeera Ай бұрын

I actually carry a bmx bike chain zi modified into a chain whip with a razor edge and hand grip. Comes in handy in knife battles. Saved me more than once on the streets of LA 💯

@norbertocaligaris590 5 ай бұрын

Te felicito! Muy buen trabajo!

@aliposhtpazan2625 3 ай бұрын

Excellent handcraft job. Bravo

@sebastienreutenauer8430 5 ай бұрын

Salut toujours un super damas avec une technique a la meuleuse exceptionnelle.... j'aimerais bien te voir faire une dague fourchette 😊... comme 2 lame sur un manche

@karlgustav5490 5 ай бұрын

super damas si les soudures etaient ok. là y a plein de "chambre à louer" dedans.

@edmilsonvasconcelos1368 2 ай бұрын

Perfeita 👏👏👏 uma lâmina forte e amolada parabéns pelo trabalho

@randomhero2480 5 ай бұрын

I would be proud to own this!

@juancastillo8102 3 ай бұрын

Un gran trabajo. Gracias por enseñarlo.

@Josue-c7s 4 ай бұрын

Todo un artista el señor 😮😮😮

@PatrickSchumacher-z8x Ай бұрын

Sir you do amazing work I love watching your work

@cefore.xplosives 4 ай бұрын

This is therapeutic

@jasont2074 2 ай бұрын

Work of art

@CarlosLima-gd8fy 4 ай бұрын

PERFEITO !

@britdog01 2 ай бұрын

Beautiful craftmanship.

@robertomiranda699 5 ай бұрын

Ficou linda e boa parabéns 👏👏👏👏👏👏👏

@kirkhenry3867 5 ай бұрын

Amazing craftsmanship!! Outstanding work!!

@Burek-07 3 ай бұрын

Finally a video like this with no music-talk on it.🙏

@Spockyyland 5 ай бұрын

Salut super travail magnifique j’adore 😮

@Cosmourso 3 ай бұрын

Ótimo peça parabéns pelo excelente trabalho

@damageincorporatedmetal43v73 5 ай бұрын

That was an awesome build...

@DanGolag 6 күн бұрын

Profiling the blade with an angle grinder is wild. That's some surgical skill.

@daz.r1994 4 ай бұрын

Now that's the best motorcycle chain i have ever seen. Amazing work.

@ezequieldarochabarboza6891 2 ай бұрын

Parabéns...bom trabalho mesmo...

@mattnobrega6621 5 ай бұрын

That's a well-done heavy-duty blade 😁👍

@legaulois348 4 ай бұрын

Belle pièce, bravo. 👍🇫🇷

@zeildocampos1786 4 ай бұрын

Processo é muito trabalhado...gostei muito.

@RodrigoDeotti 3 ай бұрын

Parabéns peregrino felicidades sempre que Deus abençoe sempre sua vida e sua família e amigos fiquem todos com Deus amém 🙏🙏🙏💯🙏💯

@turalibrahimov0 3 ай бұрын

❤

@jonl.garton4616 5 ай бұрын

Amazing!!!

@melanieschempp2097 4 ай бұрын

Klasse Teil Super Arbeit ! Gr Steff

@GORDIANABLE 5 ай бұрын

nemmeno il mago Merlino avrebbe saputo fare meglio!!!! una vera magia! 😉👍

@turalibrahimov0 5 ай бұрын

Müsəlmanlar sehrdən uzağdır.😊

@pedroseveriano2439 4 ай бұрын

Eres un Crack, GRACIAS.

@johanmavromichalis9203 4 ай бұрын

Wow and respect thanks for sharing this master piece.

@knivesproject3349 4 ай бұрын

Your kind words mean a lot to me, thank you for your support!

@husseinmokhtar1326 4 ай бұрын

ماشاء الله تبارك الله عليك مبدع

@turalibrahimov0 4 ай бұрын

❤

@markkasper7281 4 ай бұрын

intriguing content well done

@NgocQuangvlogs-fw3lh 4 ай бұрын

Thank you for sharing this amazing video It's a pleasure to be with you

@Bert_Fromarketin 16 күн бұрын

That was refreshing to watch! Thoroughly enjoyed seeing you display your skill level. I love knives. thats pretty cool!

@osvaldogorgoroso9540 5 ай бұрын

Impresionante trabajo saludos desde Uruguay abrazo

@DharkSamuel 5 ай бұрын

Questions - 1. What is the white powder you put on and why? 2. Why submerge it in engine oil? Awesome build by the way. Wish I could make stuff like that.

@turalibrahimov0 5 ай бұрын

Ağ toz "Bura"-dır Yağa sərtləşməsi üçün salınır

@estebanlassich5928 7 күн бұрын

The white powder is more than likely borax. It help prevents the surface from rapid oxidation which comprises the forging which will create inclusions in the forged metal. The used motor oil was probably used because it is a thought that the carbon in the used motor oil is absorbed into the metal in the heat treat. This is actually false. But the viscosity of motor oil is a excellent liquid for quenching. It helps the the thermal regulation and keeps a even heat treat. This helps with preventing warping and cracks. I use used motor oil just because I have it