KO Marvel Legends SENTINEL BAF Action Figure Review

KO figures have seen a lot more popularity recently but they aren't always up to snuff. Will this one be worth getting?
It's available here: www.ebay.com/itm/Sentinel-Rob...
The best place to buy collectibles
www.bigbadtoystore.com/?...
Merch
teespring.com/stores/anthonys...
Twitch
/ anthonyscustoms
Patreon
/ anthonyscustoms
Website
anthonyscustoms.webs.com/
Facebook
/ anthonyscustoms
Twitter
/ anthonyscustoms
Send me something!
Anthony's Customs
PO Box 2243
Keller, TX 76244
Discord
/ discord
Buy Aves Fixit Sculpt and other great products!
www.avesstudio.com/catalog/
"Copyright © 2020 Anthony's Customs, Corel Corporations, and all its licensors. All rights reserved."

[@dnl1737]

I was sold until the articulation was basically none

[@XAzzuroX]

Peice of garbage i want to get rid of it

[@XAzzuroX]

Me too I fell for it. On my birthday I wanted a cool gift for myself. Its garbage I wanna get rid of it.

[@Lee86THUNDER]

Dear marvel legends, the people want a new good quality sentinel. Find a way. I want at least two. One of my biggest wishes for the line.

[@raidenkeify]

Agreed they should do it with a huge wave but who knows maybe they're waiting till they make a movie

[@freethoughtism]

Save $500 at least $300 at a minimum - It's coming via Hasbro Plus and should be MASSIVE .... Too expensive for me ....

[@schwann1826]

@@freethoughtism If it's something out of this collector world then sign me up for 3 lol

[@heartbust4624]

free thought it’s about $350 but yeah too expensive for me and way too expensive if you want 2

[@heartbust4624]

free thought it is massive though

[@Engreido2814]

I wouldn't pay more than $50 for ko. Specially one with such limited articulation.

[@PicklerEntertainment]

$100 with that little of articulation... That's terrible. Spend the $175.00 if you want this guy. As an Army builder that can't move, at all, I would say $40 would be the absolute most I would spend, and that's being generous.

[@AlphaProto]

I know they were going for army building, but I wish these sentinels had the ability to pose with the palm out like they are blasting. That is a key pose for sentinels that should have been a priority. If they couldn't do anything but stand and have that pose I would be interested.

[@aaronmauer7225]

For me this should not clock in over $50

[@mickeybarber5095]

Someone finally not praising this, articulation is a deathblow. Even a minor improvement would make a huge difference. Great video man!

[@magemarshall3139]

Very cool of you to help this guy out with the review. Gets his product some exposure and lets collectors know it’s out there.

[@BBmetalhead04]

A KO for that price and articulation doesn’t seem worth it to me. I’ve seen KO Oversized Transformers that actually have additional articulation and accessories.

[@rokdri9983]

KO oversized transformers are so good most of the time, definitely the standard for this kind of stuff imo

[@cheapczar8937]

I'll consider this sentinel for Toy Photography

[@Wortwort-Spooderbat]

Cheap Czar over a hundred bucks though dude

[@cheapczar8937]

@@Wortwort-Spooderbat yeah that's another downside with that. might stick to the authentic one

[@XAzzuroX]

I'll sell it to you for cheap

[@gerrysabron]

just graduated when this came out, one of my prized possessions with my first salary...ko looks better than the original, and not bad if you dont have the toybiz version..but still definitely prefer the authentic one

[@nivsrandom1038]

If I wanted it, id pay $20-$30 most

[@realUlfricStormcloak]

I would... Shell out the extra 75-100 for the real one 😬

[@donaldtusk2678]

Skyrim belongs to the nords

[@KitbashCustoms]

I had hope until that articulation came up short, I know it’s not Spider-Man but I need a bit more than that, it’s a no from me 🤷‍♂️

[@gerrysabron]

Got Sunstreaker KO for $40 & feels like a real MP, only joints loosens every transformation...having bought these Bafs from their original wave w/ 6 figures included through my school allowance, I dont recomment these then for such a price..appreciate the honesty in the review

[@LazDioramasAndToys]

Really glad you got the chance to review this. I have seen them on eBay but wasn't sure about pulling the trigger. Now I know.

[@comixproviderftw_02]

That looks too convincing for a bootleg.

[@diegodankquixote-wry3242]

And everything else is not very convincing so shrugs sans undertale

[@Wolfie1262]

That's some faulty logic. I've seen some crazy good bootlegs. MPP-10 Optimus Prime, for instance

[@nottoofast]

LOOKS

[@davidwilson6717]

Thanks Anthony, glad you reviewed this, and well done. The one thing I like BETTER about this KO is that he isn't wearing a corset. The slim girly-waist of the original always looked sillywrong to me... So I might just go for a few of these... if only the palms could be opened and rotated for a threatening pose...

[@godisgreat8462]

Very expensive. Better to see your review than to waste money. You did a great review and awesome video

[@deviantknight7009]

Hasbro labs teased a giant sentinel targeting Jubilee. Id save my money for that announcement later on.

[@kuldipbinning1989]

Seen a review of this several times it was £75 quid. Which is still too much, just to stand around. I got an original one about a year ago that cost less then this.

[@huiqanlu7494]

Thanks for the ko comparison! Would like to see more!

[@AnthonysCustoms]

I don't collect KO in any capacity so that is highly unlikely. As I mentioned in the video, I don't think they're worth it. Only for certain individuals with specific goals really.

[@btsfansarmy6098]

Awesome video man

[@CraftyGecko]

Also, after seeing your mcfarlane doom-slayer review, I mashed the joints and mixed them with an shf thanos, gave it a repaint, and honestly, it was worth it!

[@zephyrleapold6796]

Smart to not move him until halfway through the video, cuz that's as far as I watched, thank you for sharing

[@centurionfragger9859]

good thing i got the original when it came out bought all the pieces to put it together

[@BoogSReviews]

I’d love it if we’d get a new baf sentinel. Make it as big (or as close as possible) as the old one and just make it like 14 figures (7 figures split into 2 waves) to build it that way it’d be tall. The new abomination baf is pretty big with 6 figures to build him so imagine what 14 could do. It could be 14 figures split out over 2 waves similar to how fin fang foom was (it wasn’t 2 waves but it was split into a few figures released in spring and some in fall).

[@alycks6056]

nice i always wanted this ver. of sentinel. I may get one. I just want it to stand on the shelf and look badass, dont care too much about articulation

[@ratmachine87]

I never knew there's a bootleg Toybiz sentinel baf

[@Tremain]

Isn't the sentinel that comes with a wolverine cheaper than this and better quality?

[@todzilla8568]

If your going to shell out this kinda money on sentinels you might as well wait for the haslab one, which I would assume is probanly going to be around the 200-250 mark. I would also assume it's going to be infinitely better then anything you can get now

[@OpticBlast-yk5hf]

I want a 13 ish inch sentinel in the style of the newer surter figure.

[@gabegreec]

i don't agree with demoniacal fit copying molds but if bandai wont make a salza or banan figure, they kinda don't leave us with anymore options than to seek an alternative even if its a little moraly grey

[@Wortwort-Spooderbat]

Meh seems overpriced for the amount of articulation

[@IceDragonKustoms]

Is there a possibility you review mcfarlane Johhny Cage, Raiden and new Spawn? I have the first 2 and I think is a improvement to scorpion and Sub-Zero, still have trigger finger hands though

[@chriscollector3371]

Am going to get 2 of these army build

[@alycks6056]

just got it after nearly a month of shipping lol, the pro: it really does look incredible standing on the shelf, and that's all i want it to do. Cons: can't really pose and joints r flappy. To me it's worth it. unless u dont mind paying Double for the BAF one. and there's no really other options.

[@chairmanprakasit2539]

For a bootleg, that's a hell of detail.... I think it is actually worth it.

[@FluffyCajun]

All I need is the upper torso to complete my Sentinel baf. And I think Id rather track down and shill out the money for that, instead of spending the money for this. That being said, it does look cool with a great paint job.

[@user-fn2ov5bm2e]

So good! That's just what I was going for.

[@ChiefPeep]

I didn’t even know they made a knockoff sentinel. I wonder if there’s a bootleg fin fang foom. I only seen a bootleg Pitt that goes for like $100 everywhere which is insane.

[@logotextlol9819]

Looks awesome still

[@CattyMintgum]

Plot Twist it's Hasbros Leaked SDCC Exclusive but with more paint and at a cheaper price point

[@Cardiacarrested445]

Honestly I think it looks badass

[@gabrielwatts5133]

Damn that's a sick k.o. I'll buy one . How much and where you get it?

[@ElJediDelB612]

Haha 107 USD .

[@whichever-godyou-prefer1640]

Storm collectibles Bane? 😁

[@dk6419]

Glad I have the original from years back. Wouldn't touch this with a 10 foot poll.

[@Cscottrun53]

If its already over 100, might as well go all the way.

[@taniaramos4201]

He has sold, so far, 34 KO that equals to more than 3.600 US dollars

[@MMunn]

The idea of army building with this is cool but it’s basically a shampoo bottle figure, like $35 at best, if I was gonna pay over 100 I’d just buy an original and at least you could sell him later and get your money back if needed, as is this is not a deal at all, KO FFF and Red Hulks at least have articulation most of the time

[@iamcarpetpython]

Too bad this figure's listing was removed. I hope the one I ordered that is in transit still makes it to me. It looks cool, and is far cheaper.

[@spurnd]

Damn, I picked up a real one a few years ago for $80 shipped.

[@AnthonysCustoms]

I bought 3 for 150 about 10 years ago.

[@DewDawgReviews]

Neat

[@rolfathan]

I would almost rather people that make these just produce plastic STATUES at this scale. They never get the articulation right. Joints are always loose and minimal, so you can never make a good pose for them. Vs, if he had just sculpted it in a cool pose, and it just didn't pose, I wouldn't necessarily mind putting on my shelf with the figures.

[@Mr767267]

No for $108, and wonder why nobody in the 3d print world has been able to recast it to slightly bigger scale to come close to 1/12 scale.

[@x_enomotofigs]

$107, should say: no way, not woth it. If you want some for background put a poster, if you use this, you need 3?, 4? Minimum, so 300-400, that’s an expensive background.

[@s3d17]

Can you tell if the material is ABS or HDPE? HDPE would be like the soft rubbery plastic Hasbro use on the modern Marvel Legends figures aka polyethylene/garbage bag plastic. Looking at the video I think this is HDPE.. the figure seems heavy but still soft and woobly.

[@Lalam24]

hasbro uses plasticized PVC for the more rubbery plastic, ABS for harder shells, PA for joints and sometimes POM. HDPE isn't common in the toy industry. The only PE I'm aware of on any toys are on gundam kits (polycap pieces). PE is incredible difficult to bond to, including to paint, and is generally used where nonporous materials are required.

[@AnthonysCustoms]

This

[@s3d17]

@@Lalam24 hmm thanks for the information, I been looking into the usage for HDPE/PE in toys and sadly my information wasn't accurate 🤦‍♂️ I was looking to have some flexible outer layer made for 3d printed body frames and a factory suggest I use HDPE because it is commonly use... 🤷‍♂️

[@Lalam24]

@@s3d17 No problem dude, do you mean like phicen bodies or something?

[@s3d17]

@@Lalam24 Right, TPE as in Thermoplastic elastomer. Almost made an extremely costly mistake

[@greatwhiterex83]

Need to be cheeper way to much £20 or £30 and that it just look at as a marvel titan

[@printrabbit8117]

Wayne Ward This looks way better than those, It’s not even close. Maybe £50 for it, if the joints weren’t so loose

[@waldirrojas8560]

Need to be more affordable to buy more than one but no because original is expensive your copies need to be too Plus articulation is limited

[@ronaldbyrne3320]

I’d pass. Too pricey to me for what would be a background-space filler in a shelf diorama. Pity the articulation doesn’t live up to the very good paintwork and sculpt; it looks good next to the ToyBiz Sentinel.

[@trimpinatorc245]

Whoa

[@ARC_Trooper_Han]

Could photoshop that sentinel for free 99

[@lestertagala]

I both have fake and authentic version Sentinel

[@RoundHeadK--jx7uu]

I purchased it but COVID 19 contained it from coming over to the states . Oh well 🦾😔👍

[@mr.osborn3141]

The haslab sentinel blows the toybiz sentinel out of the water,in my opinion.

[@AnthonysCustoms]

That's a reasonable comparison

[@aarontwenty7]

People are crying out for a army builders of this figure , if Hasbro made it people would definitely buy it , even for like £50 each

[@fraser7211]

Soooooooo BAF Sentinel's bigger blacker bootleg brother

[@diegodankquixote-wry3242]

Only like less half an inch taller, and he's more metallic, which means he's more saturated then the original

[@TropicThunder54]

That’s not a figure... It’s a statue

[@TimothyLau55]

just too greedy for this one. KO should know their place. Good KO have better quality with cheaper price than original nowaday. For this, it should be 1/2 of the original price of the legal retail counterpart, instead of cheaper than ebay.

[@airxtream2139]

$50-$60 is the most I'll pay for you I'll rather save for a authentic baf

[@ferb8021]

This does looks awesome but i don't like unlicensed products since it's using someone's original character without permission, but i totally understand people who buys them and i'm okay with that. Because the big companies are the ones who acts unethically selling over and over the same repainted figure even being a trash one for years like hyperion, or selling half figure like cannonball or just endgame wave Loki itself. And they expect we feel like stealing and it's a super crime when we spend hundreds of $ on their toys, but still getting just one figure time to time it's stealing. You know what imma get him

[@juansoria6521]

Uhhhh i think the articulation and price kills this shit

[@XAzzuroX]

I fucked up i bought this on Ebay by accident. Its a peice of none articulation shit!

[@brenoferreiraferreira4409]

This is ridiculous, at least in my perspective, even if it was 50USD it would still be very expensive for what it is. I wouldn't mind paying 10USD for each and that is shipping included, for the price they are asking for it I could buy a Storm Collectibles Sagat or a 3rd Party Fans Toys Transformer both of them shipped internationally and when you think like that you can easily understand why I'm saying it's ridiculous. Thanks for the review though Anthony.

[@kendellbedenfieldjr9936]

Anyone know where I can get a KO Miles Morales?

[@CraftyGecko]

Not really worth that much, I would rather pay extra

[@mopimpn]

Blackface sentinel not cool dude...

[@JapiCustoms]

107? Chines3 people are crazy

[@niccage6375]

I would rather buy only one legit sentinel instead of a lot of these sentonel

[@ro7985]

I had the figure and my advice is do Not buy it. The marvel Titan heroes are better built. Lol I would say only buy the ko sentinel if it's 30 dollars max. It's not worth more than that. Plastic is so bad it's not even worth it to add custom afticulation. It's only good for broken damaged diorama battle damaged sentinels.

[@DevilzFan]

This unfortunately is an easy pass for me. That price is ridiculously absurd.

[@JohannGinpachi]

It's 3d printed, that's why its quality feels so cheap. The vertical layer lines are actually quiet visible. It's just too expensive for a 3d printed figure in my opinion, buuuuut who cares?

[@AnthonysCustoms]

It's not. It probably was originally in the design process but this is certainly molded plastic. Even marvel legends show print lines from time to time.

[@N3RFTHIS]

Usually horizontal lines on 3d printing and I can't see any

[@ev0n234]

First

[@nitro-boy09]

Jokes on you if you say this turd worth the price. :D

[@AnthonysCustoms]

I said literally the opposite.

[@BillyH888]

This is so not worth it!

[@lucaswardas]

lol you're nicer to this $100 bootleg than a $70 Mafex.

[@AnthonysCustoms]

So, you didn't watch the video? Or at least you didn't listen.

[@Littledragon03]

Not worth it.

[@rickeyfeacher4688]

Trash I rather spend on the original

[@neox77691]

Not worth it.