Kohler CH25 fuel pump replacement

[@Kometheus]

Repaired it like it was nothing! A master at work!

[@cplawncareservices4497]

Thank you, worked perfect on my 2004 Command Pro 25 Engine

[@patriciaknight3360]

David, believe mine is the same mower. SCAG SST-25CH. 1999 model. Mine is leaking oil around the gasket. Did the valve cover work OK?

[@davidcurnutt9584]

Yes it did. No leaks at all.

[@davidcurnutt9584]

Thanks for watching!

[@arboristBlairGlenn]

What caused you to think the fuel pump was bad? Was it not cranking enough fuel or none at all?

[@davidcurnutt9584]

There was no fuel being pumped at all to the carb.

[@arboristBlairGlenn]

@@davidcurnutt9584 thanks. Got a problem with my Kohler 25

[@MorriCakesMainDkP48]

You didnt have to get a valve train kit for that?

[@davidcurnutt9584]

No, it wasn’t necessary for this engine.

[@CalebBates-o6z]

Your brave with the impact

[@traefrancque4690]

Could you post the link from where you bought the fuel pump?

[@davidcurnutt9584]

DEF Fuel Pump Kit Replaces 24 559 02-S 24-559-03-S 24 559 05-S 24-559-08-S 24-559-10-S for Kohler CH18 CH19 CH20 CH22 CH23 CH25 CH640 CH730 smile.amazon.com/dp/B081ZNX8X2/ref=cm_sw_r_cp_api_glt_fabc_0KD1JA026NB6VF0EFBAT?_encoding=UTF8&psc=1

[@TLMD]

Nice work Sir! Keep it up brother

[@gravelyman]

Nice job!

[@mrwho2174]

Why is there an oil cap on where the fuel pump goesv

[@davidcurnutt9584]

Because the fuel pump is in direct connection with the cam. As the cam inside the engine turns, it pushes on the pump lever that goes back and forth pumping gas to the engine. Because it’s directly in touch with the cam surface, it is on the inside of the engine, therefor you can pour your oil into the engine from that port.

[@Lovinflyindrones2022]

Nice video

[@fixitorstripitGardenmachines]

Tidy job there David

[@davidcurnutt9584]

Thanks partner. I really enjoyed your powder coating video. May need to get into that myself. Looks fairly simple and it’s all about the prep work and even coating the material.

[@toddmiller7281]

You can eliminate buy that whole set up , by getting rid of the junk inside valve cover and replace that kholer pump with a vacuum briggs pump...make your own gasket and find vacuum on motor.. waaaa laaa.. fu*k buying that whole valve cover set up.... 20 bucks my way...

[@TheRustyRooster]

Hech yeah hope that solved the fuel delivery issue......aaaahhhhhh those dog gone impacts...

[@davidcurnutt9584]

It did not. Can’t figure this one out. It’s got a new filter, new lines, new pump, and even a new carb. Only runs on full choke. Tested the old carb, same issue. This is an older Ch25 so the ASIM module went out, replace the fly wheel and coils. Threw in new spark plugs. Changed the oil. PSI in each cylinder is 175. I can NOT get this thing to run.

[@TheRustyRooster]

@@davidcurnutt9584 call me

[@TheRustyRooster]

Email me your #

[@davidcurnutt9584]

Email me your number at [e-mail]

[@TheRustyRooster]

@@davidcurnutt9584 might be an air leak at carb