Kona N Takeda 3” Midpipe. INSANELY LOUD! 🔥

[@CaliforniaKonaN]

Ah nice, glad you were able to work it out! Sounds amazing!

[@FastKonaN]

Thanks man! Can’t wait to post more clips I am in love with it!

[@Snooz.n]

Poppin N Bangin

[@4ws0m0]

Sounds awesome! I just picked up a Kona N and I already have a takeda midpipe otw. Hopefully installing it this weekend, I can't wait to hear it!

[@MrAdams-zg6gv]

N mode sounds incredible with the non resonated mid pipe exhaust system from Takeda. Love it on my Elantra N!

[@4ws0m0]

@@MrAdams-zg6gv agreed, I ended up installing it when I had only 200 miles on the car, and I honestly don't know that I could ask for much more. Love the sound.

[@MrAdams-zg6gv]

Installing this same mid pipe on my Elantra N tomorrow. Along with an air intake system and Boomba BOV. Love the car, but just wanted even more SOUNDS!😁 Updated 4-27-23 The Takeda non resonated mid pipe exhaust system sounds incredible in "N mode"! LOUDER POPS/BANGS! And more of them! Back to completely quiet in eco/normal mode. Its PERFECT! Takeda open box air intake system and turbo inlet definitely gave the car an even stronger 30mph WOT pull!

[@Veexd13]

How’s the fitment for the Elantra n? Curious about doing it to mine.

[@MrAdams-zg6gv]

@@Veexd13 I updated my post with the parts Installed and tested. And I forgot to mention the full VTA BOV sounds great!

[@Veexd13]

@@MrAdams-zg6gv exactly what I’m looking for!! Do you mind posting videos of the sound with the mid pipe on? Where did you buy it?

[@erickjohnson5301]

What bov are you running? Clean beautiful KN!!!!

[@FastKonaN]

It’s the SXTH element BOV

[@cindysue5474]

Now you just need a 3 inch muffler rear tip setup sounds good.

[@FastKonaN]

Definitely 🔥

[@cindysue5474]

@@FastKonaN Check out Aero Turbine mufflers had one on my SRT4 years back and it sounded nice. Are you going to to a 3inch down pipe and cat?

[@CH3FSN1P3Z]

Just got mine and it has a very tiny leak on the front clamp. Any advice? I’ve tried to move and tighten it more but nothing

[@FastKonaN]

Yeah mine had the same thing. Leave it and it will seal after a long drive. The thing with exhaust clamps is they will almost always leak, best thing to do is get it welded but it doesn’t bother me much. I don’t even hear it

[@CH3FSN1P3Z]

@@FastKonaN thank you! I don’t hear it either I just know it’s there 😂 was thinking I’ll check it again in 100 miles or so. Now just have to figure out how to remove the cars long rev hang when I rev it

[@acceptthefacts]

Hey bro I appreciate that you uploaded this video; I’ve been taking notes on your setup because I plan on getting some of the same parts but what branded oil catch can do you have for your kona n? I have wrote in a notes app you use a Takeda 3” midpipe, rpm performance intake/turbo inlet, pipercross filter, and a SXTH element BOV. Besides these things do you have anything else that’s note-able? Also let me know about the catch can too! Thank you 🙌🏽

[@FastKonaN]

SXTH element catch can & Pierburg BOV solenoid. 😎

[@danieljohnallen]

Awesome! Are you looking at getting a fatter muffler with a cat back ?

[@FastKonaN]

Actually no that would be it for now. Later on I’d be getting a downpipe made 😅

[@jeffreysteele6404]

Sounds great you should do another pov

[@FastKonaN]

Definitely will! Check out the link in my Bio instagram will get some good video too

[@delasmoo]

How many resonators were on your OEM midpipe?

[@FastKonaN]

Exactly 2 resonators

[@yourmanzach2307]

How much was that part?

[@compacheo603]

Midpipe be the same as deleting the resonators at exhaust shop ?

[@FastKonaN]

Not at all, since you are upgrading to a 3” instead of a 2 and a quarter inch pipe

[@MrAdams-zg6gv]

I have the Takeda non resonated mid pipe exhaust system on my Elantra N and it makes N mode sound incredible!! Loud pops/bangs! More of them also! Even in 5th gear

[@nicks.7247]

@@MrAdams-zg6gvIf I purchase it and take it to an exhaust shop they’ll install it just like that?

[@MrAdams-zg6gv]

@@nicks.7247 yup its very easy. Any car shop can install it. It fits with no problems. Sounds incredible!!

[@michaelwilburn1001]

How big is the stock mid pipe?

[@FastKonaN]

It’s about 2 inches in diameter

[@LeftenantMalachi]

$550 for a 3" pipe! I wonder if getting a muffler shop to make a 3" for A LOT less would give the same results.

[@FastKonaN]

Most likely, I just don’t like anyone touching my cars so I rather pay the price to install something myself.

[@Jfresh55]

So you buy a car but don't invest in jack stands?

[@FastKonaN]

I have jackstands 😂

[@DriverJ-N]

Why would u need jackstands for a non lowered Kona on rhino ramps 🤔

[@klasseact6663]

Drone🤔

[@FastKonaN]

No drone at all. Only if you’re cruising in N mode but I don’t

[@klasseact6663]

@Lone Wolf Detailing so freeway in ECO/NORM its just louder, that's it?

[@FastKonaN]

@@klasseact6663 that’s the thing it doesn’t sound any different in eco or normal. Almost like it’s not even modified. Only Sport and N mode are seriously way louder. I’ll post a video soon of POV driving haven’t had any time.

[@klasseact6663]

@@FastKonaN and that's the aFe Takeda mid-pipe🤔

[@FastKonaN]

@@klasseact6663 Yup 👍🏼