Snap On Custom Ratchet!!!! How Is The Warranty On A Ratchet???

[@dieselmedic5673]

@ 14:25 is the start of the custom ratchet. The 1/4” locking flex head soft grip with the 3/8” guts in it. At 15:34 is the start of the build of it.

[@MaximRecoil]

The blue-handled cutters are Xuron Micro-Shear 170-II - xuron.com/index.php/main/industrial_products/11/10. They are made here in Maine (in the town of Saco), and are the best flush cutters I've ever used. I've been using them just about every day for the past 22 years. I first used them when I started working in a PCB factory in Pittsfield, Maine in 1998, and those were issued to us for cutting off the excess component leads after soldering them into the PCB, and after I got done working there in the early 2000s I bought a pair for use at home. For heavier duty use there's also the Xuron Maxi-Shear.

[@Gixer750pilot]

Broke two 3/8” ratchets and then went straight to the 3/4”. Half inch breaker bar would have been a good idea from the get go

[@sledsports]

That was a dang good idea on that ratchet. I got 2 of them little fellers I might pick me up another 1/4" long flex head and put the 3/8 guts in it outta one of mine. Thanks Koon Trucking. I need a couple of them diesel medic shirts!

[@jeramy2398]

I have matco 1/4" locking flex that I love had it years I have Cornwell set metric standard sockets short shallow up to 15mm or 9/16 rarely every use 3/8 tools

[@FONDave98]

Wait.......did I miss something...Milwaukee tools on a snap-on truck!! I need two of them 1” impacts for my two service trucks

[@Alanthe918mobilemechanic]

The blue is left hand and the right hand is the red one flush cutter

[@JustinDowDIYcentralhighway]

Dang you know it’s bad when Snap-On starts selling the Milwaukee Line Up!! 😂😂🍻

[@KoonTrucking]

I still say the Snap On CT761 is the best all around impact for a 3/8” because of the weight, size, slim profile and the trigger but anything other than 3/8” better get that Milwaukee! The 1/2” 2767 Milwaukee is bad to the bone. The 1/2” Stubby is an awesome tool also

[@JustinDowDIYcentralhighway]

Koon Trucking Yuppers.

[@thegreatalmightyhoost6301]

@@KoonTrucking No...I love my Milwaukee 12V 3/8 stubby impact. Snap-On better get their asses in gear or cordless is going to be a one brand game

[@brandonwelshsr.8696]

My snap on dealer does not sell Milwaukee but Matco dealer does.

[@dylanphillips9745]

Every shop has that one guy that doesn't pick up his tools

[@travisgustin4677]

I have that extra long handle flex head chrome ratchet. It gets really dirty so didn’t want a comfort grip. It’s my favorite ratchet in the drawer.

[@SuperTrent131]

I've got those bur bits Wally had and they are bad to the bone! I love them and wouldn't trade them for the world

[@garryhardcastle5984]

I got a kick out of the Snap-On lend it program when I had my service station I had a guy come in who wanted to borrow a gallon of gas promised to bring it back the next day. He was one of the biggest richest farmers in the area I told him to drive home and get the can of gas he forgot to bring. It was only about 20 miles.

[@roberthurst5863]

Used to much when it was new lol

[@RCS-ci2yc]

Love your guys channel. Keep it coming.

[@gregcothrum4045]

Great video y'all have a great weekend and stay safe 👍

[@ecleveland1]

Man I sure miss these videos were everyone was there having fun shooting the shit until it got about waste deep!

[@rdevers1768]

I'm curious to see wild Bill's antique 3 toothed ratchet 😂😂

[@billpickens383]

I'll try and remember it next week.

[@rdevers1768]

Bill Pickens oh my goodness it's wild Bill himself!!!

[@brandonsizemore3619]

hell yea!

[@wallyhare8616]

I hate it when he hands it to me. I think I'm going to have to help ole bill out on his poor ratchet.

[@ronanderson1816]

thank you for sharing.

[@tommyross2959]

When do we get to see this service truck ????

[@sneakysnake109]

LMAO at Clay picking at Bill. Ratchet brand comparrison: Gearwrench 120xp 120 teeth 3° arc swing Price: $79.95 Billwrench 120px 3 teeth 120° arc swing Price: Priceless Hope you all have a great weekend!

[@TheTheomax]

When is Hamilton going to add the Milwaukee tools logo to the side of his tool truck? I just had to ask

[@KoonTrucking]

Hahaha about time they get a decent 1/2” impact on that truck ! Snap On is way way way behind Milwaukee in 1/2” especially

[@thegreatalmightyhoost6301]

Snap-On is losing millions by the week on their complacency!

[@Haasltools]

Snap on Friday!!!

[@jasondelvecchio8720]

They have a tape measure with inches and millimeters on it too snap on ask jo for that one about 35$ in my area from snappy

[@redwarrior320]

I had a ratchet break this week, the screw connecting the flex head to the ratchet handle snapped! That never happened before! My dealer fixed it no problem! My CT 761 broke AGAIN! Y’all have any problems with them? A lot of people I know are having problems with that gun, I just bought a Matco gun and I am not having problems anymore

[@KoonTrucking]

We have all had our CT761’s replaced. I’ve had about 2 or 3 rebuilt.

[@jonnyboost6935]

How do you polish up the tools?

[@dylansatchell3188]

What’s the part number on that custom ratchet?

[@BespokeRyan]

Bad boys on bad boys 🤣😂

[@matthewlang3619]

I want one of those custom ratchet Thomas!!!! How can I get one?

[@KoonTrucking]

Talk to your dealer and get him to fix you up

[@tjautoservicellc]

Didnt Bill want the tape measure?

[@billpickens383]

Nah. I have 3 already (all different brands). I did have like 5 of them but Wally lost 2 of them!

[@Hipsters_N_Hippies]

@@billpickens383 God damn it. Wally we all know that you are the ox of the shop. But that doesn't mean you gotta be as dirty, forgetful, and dumb as one (at times.) Shit... no seriously. 💩. Wallys shits all over the damn floor and every damn flat surface around here again. What the fuck man...stop leaving all your crap all over the damn place from 2 jobs ago. His new name shall be OX.🐃 He's earned it. He makes the place look like a damn pen. He's strong as one. He leaves his shit all over just so you can step in it. And he as smart as one to boot.

[@theEpiphone247]

First hell yeah brother!

[@Rhaspun]

Is there a combination of parts to convert 1/4 to 3/8 with the quick release feature.

[@milestone_media]

Know the part code for a 3/8 long locking flex head?

[@michaelkeysor9852]

No pipe on it?? Where have I heard that before? 🤣🤣

[@KoonTrucking]

It seriously didn’t no cheater pipe at all. When it gave way and the Matco broke I busted out the 3/4” Snap On and it took it no problem

[@Hipsters_N_Hippies]

@@KoonTrucking Damn how far did it take it? All the way to the ⚾️🏀? Or did you when you bought it? $💲💰💵💸📉🚽 But I bet yall glad you did buy it way back then. Ain't ya?

[@MattMorris481]

Linemen tools are expensive, but how do you mechanics afford all the stuff you need unreal!

[@KoonTrucking]

It sucks but hard to work without them. And some folks cry about having to buy ink pens and markers 🙄

[@danielmohaupt3487]

You need to go and hide bill 10mm sockets

[@KoonTrucking]

Shoot no ! Bill keeps his stuff nice and organized !

[@davidb3054]

I have that tape measure

[@KoonTrucking]

I bought one too and I love it.

[@zacheryjones2903]

What ratchets were used to make the custom ratchet?

[@jeffhooper3447]

the rebuild kit and face plate from a FCF72 and any 1/4" drive pear head snap on ratchet works! (they used the non flex version but it's the same parts)

[@shoprat94]

What are you using the custom ratchet for? Any specific jobs?

[@KoonTrucking]

Tight spots

[@austinmoore1689]

If it aint Thomas it aint shit

[@matthewslauenwhite7277]

My snap-on guy has been giving me some good deals lately. This week I picked up a new 3/8 locking flex head with comfort grip for $145 and last week I upgraded to the 4 piece striking prybar set with the 36" one free for only $217. Given the 36" one was used but it's a matching set and looked good as new so I'm not complaining

[@19ADAM80]

👍🏼

[@davidwalle5025]

Did wild bill go to the j young meet up? It is not a wild time if bill wasn't there. Good video, the racket change is getting very popular i have seen it on other channels.

[@KoonTrucking]

No it was just me and Shiloh that went up there. It was late when we got there and ended up staying the night and the next night we took Dow back to the airport

[@danielkostriba]

Are you flipping serious Milwaukee tools on a snap on truck !

[@Peep18m]

Don’t buy a snap on tape measure. There’s waaay better options out there

[@anthonystubblefield4987]

Really needs to understand if you have to ask how much you really can't or don't need to aford them!

[@danielkostriba]

Garbage ass snap on truck I've seen a few sad...