You have that have the car completely off the ground. Turn the car on with your remote off. Hold bind on the remote turn it on then pull trigger. Center it. Brake it.then turn right. Then turn left. After that you good
@edhage3743 жыл бұрын
Same problem with me, doesn't work,keeps blinking red
@TheSphongleface2 жыл бұрын
This is a calibration procedure. Not the miracle smack that has become necessary to solve this new horse shit problem.
@jeremiahstewart99223 жыл бұрын
I’m having the same problem
@TheSphongleface2 жыл бұрын
Banging on it with a wrench? OHHHHHHHHHH why didn't I think of that after trying everything else for six hours while trying to stop myself from necking up?
@dankstank68543 жыл бұрын
Brand new outcast 8s just got batteries today for it put them in fucking thing won’t break goes by itself reversed when it feels like it
@LargeeeScaleLife3 жыл бұрын
First thing I was do is try to re-bond and re-calibrate everything. If that doesn’t help at that point definitely contact her Rison and they will fix you up
@michaelcondrey86813 жыл бұрын
I hate spektrum always had problems with them , never used them any more
@LargeeeScaleLife3 жыл бұрын
My experience with him has definitely been hit or miss
@surfside753 жыл бұрын
Got 10 runs out of the spektrum smart esc 150 it also fried 2 $50 recievers. Out $250. Only buying Hobbywing ESC now.
@SaveTITANFALL3 жыл бұрын
hi can you help me reset the esc not sure how to do it pls help
@LargeeeScaleLife3 жыл бұрын
Is it not working at all or are you trying to reset it to factory specifications
@SaveTITANFALL3 жыл бұрын
@@LargeeeScaleLife just trying to reset to factory reset
@LargeeeScaleLife3 жыл бұрын
@@SaveTITANFALL there’s really no master reset what you need to do is follow this link to the manual you will then follow the steps to go through the settings on your ESC reset each setting back to the factory default and you will be back to where you began but like I said there’s no way to just do a hard reset www.arrma-rc.com/pdf/manuals/K8SDX3Manual.pdf
@SaveTITANFALL3 жыл бұрын
@@LargeeeScaleLife i think i got it i set up my punch setting to level 5 and i was doing some crazy wheelies. i think i factory reset by holding down 5 sec on set button start it light up red and green and turn off the esc to save the setting..
@SaveTITANFALL3 жыл бұрын
@@LargeeeScaleLife in the manual it says to reset all programming items, ( press and hold teh set button for 5 sec )
@ShogunGlock3 жыл бұрын
Just got the kraton 6s v5 and first problem was I lost two screws that attach the steering rods, ok my bad, should of made sure a RTR is properly put together, and today a week later on a fresh set of batteries my esc would just blink red and the servo would just jitter like crazy. Is it the same problem? Should I bang on the bottom?
@LargeeeScaleLife3 жыл бұрын
It could be but it’s an entirely different design system you could try it. One thing I would try is re-binding your ESC and receiver and see if that does anything. Sorry you’re having issues definitely hit her Rison up they should fix you up
@meatballpudding43123 жыл бұрын
What did you come up with?
@ShogunGlock3 жыл бұрын
@@meatballpudding4312 my servo took a shit, so I replaced it with an aftermarket, made sure my trim settings where set on my radio and did an esc factory settings reset just in case. And it runs like a beast ever since.
@xjglenn93133 жыл бұрын
@@ShogunGlock that might be my problem since servo got wet
@xjglenn93133 жыл бұрын
I'm gonna try that asap
@jamesturner98584 жыл бұрын
Any updates..... I’m having the same issue
@LargeeeScaleLife4 жыл бұрын
Working fine up to this point seems to have fixed it take the top off of your receiver box bang on the bottom of it with a ratchet and then knock around the bottom of the ESC with the end of a ratchet should start working hopefully anyway
@jamesturner98584 жыл бұрын
Large Scale Life didn’t work for me? This is a brand new truck. Only use for a approximately 20 minutes.. I’m pissed
@LargeeeScaleLife4 жыл бұрын
James Turner I would file a warranty claim with horizon they’ll send you a brand new ESC it’s a pain in the ass And then at that point you can decide whether to put it back in the truck or sell it and buy either a max five or six or whatever you choose
@LargeeeScaleLife4 жыл бұрын
James Turner And yeah man you’re totally justified in being a little pissed off that’s kind of some bullshit by the way if you haven’t already done it put a 20 to spur on that thing it really wakes them up some of the screws and the slide rail that hold the motor in our coded in Loctite a cheap soldering iron really helps with that crank it up set the head of it inside the boat for about 10 minutes let it get it hot in the Loctite will break free that’s how I did mine really helped clean it up really good and put new laptop in it when you’re done
@jamesturner98584 жыл бұрын
Large Scale Life horizon sending me new esc..
@jeremiahstewart99223 жыл бұрын
So thx for this vid
@LargeeeScaleLife3 жыл бұрын
Hopefully it works for you I ended up upgrading my power system about three weeks ago up until this point it has worked no problem since this one little setback
@imserious21873 жыл бұрын
What is the small red & black wire running from the motor to esc?
@LargeeeScaleLife3 жыл бұрын
I think you are talking about the wires that go to the cooling fans on the motor for some reason they’re molded into the jackets of the motor wires.
@imserious21873 жыл бұрын
Can you run a max 5 with the stock motor?
@LargeeeScaleLife3 жыл бұрын
I’m pretty sure that you can honestly I would have to double check the wire sizes going to the motor but I know they will plug right into a max six honestly the factory ESC is a re-branded max six but I think you can plug a five directly in. That’s what I will be putting on mine in the future
@sebastianramirez37153 жыл бұрын
Can you show the receiver connected to each wire I accidentally disconnected all of them and don’t know which one is which I put the throttle on the th and steering on str but it kept flashing red
@LargeeeScaleLife3 жыл бұрын
Then you did it correctly look at the top of the receiver you will notice a diagram that will have positive and negative make sure you have the negative wire the black one to the proper side. Also you may need to go through the barn process again and re-calibrate the ESC you can find the steps on KZbin or in the owners manual see if that fixes it
@_beastmode_rc4 жыл бұрын
When you bang on the esc it was on or off?
@LargeeeScaleLife4 жыл бұрын
Off
@_beastmode_rc4 жыл бұрын
Large Scale Life just did in and started working, thanks man
@LargeeeScaleLife4 жыл бұрын
_beastmode_rc Ch glad it worked one of the guys on the forum on Facebook taught me that trick
@chickensoftware30322 жыл бұрын
So… just beat the shit out of the bottom of the car?
@chickensoftware30322 жыл бұрын
Or pull the esc out and beat that
@traviseller37702 жыл бұрын
@@chickensoftware3032 no pull the top off of the receiver box that the ESC is attached to and start tapping underneath the lid