CHEAP MUDBOGGER BUILD 91 FORD 7.3 IDI

"ONE MANS GARBAGE IS ANOTHER MANS UNGARBAGE" RICKY BUILD A MUDBOOGER DURING THE WINTER BUT THERES ONLY SNOW TO TEST IT

[@tg2963]

Naw man there's a whole lot of transmission in that fluid

[@firedog5339]

It’s like a Slave Lake twin, but classier since it’s got a windshield!

[@nicholasbrady3554]

Don’t you ever talk about slave lake like that again. This rig a prime machine. But slave lake will fold this girl and the next one that replaces it.

[@anthonysiler4938]

​@@nicholasbrady3554 lol!!

[@mr.c8682]

"Front diff oil has casually been replaced with ... rain oil" lmao

[@jimf1007]

I clicked so fast, I thought peg uploaded, u rascal. Still a great vid.

[@wreckerjonny6144]

Don't forget save those sick dopey dope rims

[@collinstiernagle3553]

That is the fanciest high-idle stick I've ever seen.

[@perplexity6996]

not sure why KZbin recommended me this but i love it

[@XiamaraTheToxicMu]

wlcome to the red neck family, i can suggest Zipties and biasplies and mullet break motorsports too. if you like UK content try Lord Muck.

[@R.Sole88109]

If you like this legend, check out Zip Tie and Bias Plies, and Pathmaker Productions👍🏻

[@douglasmayherjr.5733]

The old 7.3 sounds good with zoomies. Wonder how many RPM it would spin and live. Thanks for the videos.

[@worthshop]

Looks like fun! I am building an idi race truck for the local circle track. Plan to take it mudding too.

[@flatoutnorth794]

Missed ya bud. Glad to see the winter didn't get ya down.

[@LarryReynolds591]

The clutch slave doesn't bolt on, it just clips on. I bled mine while it was off by just ramming the rammy part into the frame of the truck a few times. Then I used a wood clamp to hold the rod back so I could slide it onto the trans

[@metalmechanic2938]

such a fun truck to mess with! fell in love with the exhaust system😅

[@sykostevesfupadventure]

That trucks in good shape. It would be a daily driver here in ohio usa. The seats not even fucked. But cant wait to see it tear some shit up

[@superjonboy873]

Great sounding engine actually. I love how these sound like gassers at high RPMs lol!

[@benduffin5727]

Sawed off pretty much made his own version of slave lake!! That’s fuckin mint!!!

[@600wheel]

Needs chains. If you want to save the rear housing that holds the spider gears for some reason instead of welding the spider gears together fill the gap between the gear teeth that are not touching full of weld, that way they cannot turn. It won’t be as strong as welding the whole thing but you will still at least be able to take it apart and put open gears back in it if you want to

[@Brock_Landers]

"Miled-out"...now I know you've worked in the oilfield. That's an industry term...lmao

[@allenroth351]

I still don't understand how that idi sounds almost just like my 7.5 460 when you give it the beans... 🤔😆

[@westonmandelko2833]

Need to get ya a fancy camera mount like Peg so you can spray ether while jumping the starter.

[@johnguay1859]

Love the clutch is necessary to shift!!

[@johnguay1859]

Looks fixable( the shifter) Enjoy

[@pcwizzy460]

There's three TTBs too, that one is Dana 50, half tons are Dana 44, and my F-250 has Dana 44HD.

[@davedemo8229]

awesome video keep them coming

[@600wheel]

That rear diff needs a 7018 locker

[@johnnyappleseed6415]

Shoulda left the exhaust shooting straight up... Other than that, top notch, top notch!

[@camshaftshaft2711]

Love your videos bro 👍😎

[@dirttdude]

i'm not a fajigger expert but cant you hoot your whistler on to the truck so the stovepipe will comingulate the cosby sauce and bunker oiler for cold start high rev and dump chooch?. You can always light a tire on fire and throw it in the back if you require more chooching

[@pinkladybikermamma3603]

I WOULD HAVE TO AGREE WITH YOU ON THE OIL,

[@random_ostrich]

Weld both front and rear difs 🙏

[@R.Sole88109]

Good old Lincoln-Miller Locker👍🏻😁

[@tonyanderson6493]

Nice

[@diesellivesmatter]

Turn truck off, put in reverse, start truck, no clutch needed.

[@pcwizzy460]

These diffs have a tendency to work the pinion nut loose.

[@mountainviewcattle]

Just found your channel. Cool to see your Dunlops at 12:30, was looking to see if your boots matched the name of your channel lol. Do you ever wear your coveralls over top of your Dunlops? I think they're better worn that way rather than tucking them into the boots. I prefer to have a pant leg over top of my Dunlops.

[@RagdollRacingInc]

Peg would drive it no matter the condition 👌

[@jackdaicole7595]

Ps this is my only truck I have 8 head of babies and can't afford another vehicle.... I work at a local saw mill and I farm to make enough food for my babies.....I don't have much....

[@patrickancona1193]

AWESOME!! miss freezing my ass to the deck.... don’t miss the broken sun thing tho

[@chestypuller9614]

the bottom bolt on what looks like a diff cover but is a ttb beam is your drain hole

[@600wheel]

Yah son lets gooo! Ford for life!

[@calebsimth4562]

Dude she’s minty 🤙🏻

[@hillbillieslive69]

My 85 w250 is the same way on the front axle but mine is a Dana 60 straight axle

[@Guillotines_For_Globalists]

How depressing to see such snow in April.

[@Brokeandtwistedgarage]

What a beaut! Hahaha awesome

[@srt8madman727]

That's something my BorgWarner T500 wouldn't do. Shift without the clutch. I snapped my clutch cable in my 93 fox body and had to start it in 4th gear and limp it home. I could not get that sucker to go into any gear when it was moving.

[@BeamerTheFox]

it can be done but the syncros have to be totally shot lol

[@owenscott8317]

You don’t hVe to remove balljoints on a superduty 7.3 g To do the u joints either. Not sure about solid axle old Body I’ve never done them

[@pcwizzy460]

The base model headlights aren't really worth keeping, the chrome grilles and chrome trim headlights are though.

[@bosleepsaround]

Sawed off with the sawed off ace can

[@joelchils]

Got some daves farms vibe going on... just less creepy kid diddler stuff

[@captaindipchit]

Daves farm? Never heard of it, thanks...i take pride in myself in not being a kid diddler

[@countryboygrant133]

That was fn awesome!!!!!🤘🍻

[@jackdaicole7595]

I've got a 6.9idi in a 86 it has a tapping noise it tapping when accelerating or idling. Dose t sound like a bottom end knock. Only new injector pump and high pressure lines the injectors look good I do see number 8 leaking from the return side will be fixing that. It has blow by smokes when you open the oil cap. It leaks over night but once started it fires up easily everytime. Anything g else to look for? Could it be a injector is bad? Lifters? Saving to rebuild the 6.9 idi. Slowly buying up parts to do full rebuild.

[@1leggeddog]

incredible

[@hfdzl]

always count on a 7.3 !!

[@dennis3513]

I am so looking forward to this 😍😂

[@jackdaicole7595]

My truck is a 1986 f250 4x4 diesel super cab 6.9 idi c6. It's tapping and I'm trying to figure it out?? Any help would greatly be appreciated!

[@Clappedoutgarbage]

Jesus looking pegs property out there, just shitbox ferds everywhere..... having slave lake flashbacks with how beat that thing is

[@RagdollRacingInc]

Give er the beans

[@michaelbenoit248]

530km=330k miles isn’t bad for a IDI saw one at a junkyard that probably ran great that had 700k on it in a 91 Uhaul truck.

[@tripod6406]

Why did you buy a prop rod, I would have nicked Pegs spare leg, alot cheaper, Greetings from the UK 🇬🇧

[@jerrybockes4769]

Those TTB’s are a tough front end, plus they ride better then a solid axle and have more suspension travel. Ur wanting to save the worst part about the truck, the gutless 7.3 idi. In my area we pull them out, scrap them and Cummins swap them. 460 is way better then an idi. I recommend u keep that transmission it’s probably a zf5

[@d.j.758]

i like those tires, what are they?

[@diyspeed]

a 2x4 is an adjustable rod holder too bud

[@rumblesspeedshop-inrustwet1061]

What would peg say? You don’t need a clutch lol

[@600wheel]

You paid 1200 bucks for that man I remember when 500 bucks used to buy you something you could drive but for 1200 bucks come to the coast you could’ve bought a truck like that you could drive home. In 08/09 I bought an absolutely perfect mint 5 L fox body the only drawback was it had an automatic and I proceeded to blow that up and make it a stick shift car now it’s fully built with a TKO and a blower so I think I win Edit, I stand corrected you could have driven that thing home if you wanted to…badly

[@jakefitzpatrick8550]

Need to drive it to wasteland weekend

[@captaindipchit]

Agreed...but needs a station wagon body mounted on it first

[@jakefitzpatrick8550]

@@captaindipchit heck yes

[@allenroth351]

That's only 326,000 miles.. not bad..😅

[@pcwizzy460]

Supercabs are superior, and so are EFI 460s.

[@DusterNutbar]

Niceeee

[@fishnfreak04]

What kind of tires are those

[@mikebondon8494]

Those wheels are mint😅

[@nate0901]

should convince peg (not that should take to much) to revive slave lake and have a hill billy off between yous too

[@Atlanticsoutheasthillbilly]

Ima be honest I got myself an old bump and stroke and I did everything except fix the leak on mine

[@tubewaldo]

Do you know if slave-lake has givin up the ghost? or still runnung?

[@petegrant7496]

I'd take the ttb any day over gm ifs of the era

[@ardennielsen3761]

make the car i have do truck things... broke an axle, but how to fix it? hmm...

[@oldcarnocar]

fk'r sounds mint!

[@BeamerTheFox]

i was wondering why it was grinding like an indian tractor trans lol what a mean motor, cant wait to see it do work in a mud whole :P

[@elroyelblander6277]

👍👍🍻👊

[@kalh.9241]

Slave lakes cousin ? 🤔🤔🤔

[@yungBitta291]

Need to sell it to zip tie and bias plies ole pegleg

[@thewilliamss2392]

U don't need a prop for the brakes just use pegs leg looool

[@joshuarussell7546]

So slave lake number 2 peg don’t post it anymore 😂 prob took her to the dump

[@2ndspingarage]

That 7.3 is just singing

[@noelramirez1664]

What size tires

[@captaindipchit]

Military 9x 16

[@bhyknut5966]

Is this zip tie and pie plays wannabe... I don't know ?.. why am I thinking that?

[@michigan102]

Part 2?

[@600wheel]

Dude drill a hole in the bottom of the housing let it drain tap the hole and shove a plug in it how hard is that. Come on frogs aren’t that stupid😂😂

[@mjlmbl]

Nothings wrong... it just fell apart.😂

[@wtmf80]

You don't need a clutch lol

[@pcwizzy460]

Those IDIs ain't worth saving, swap in an EFI 460, 35w, 12 valve Cummins, or a Powerstroke.

[@Shittalker88]

You’ll find ford had many of the worst designs

[@shire_boy1]

Slave lake mk2

[@Atlanticsoutheasthillbilly]

DDSpeedshop