Ninja H2 Blow off Valve Install | KSIX

Ninja H2 Blow off Valve Install | KSIX
Step by Step walkthrough on how to install a TurboSmart Blow off valve and Brocks block off plates on an Kawasaki Ninjha H2.
If you need another point of view, check out Turbo329's video on the BOV install. Thanks Turbo329 =)
• Ninja H2 Correct Turbo...
Thank you to Mr. Archer over at Woolish Racing
www.woolichracing.com/contactu...
LIKE & SUBSCRIBE
FOLLOW on IG: @Ksix_

[@FJBAFYFVFH]

Just got my bike yesterday. Doing warm up/cool downs. Next is filter and exhaust and tune. Idk if I like the BOVs. Sounds like my VVT turbo in my duramax. Mine is a 2024 not a 16. Thx for the video!!!!

[@user-ir5sk2vm7j]

Awesome video just installed the BOV on my 2023 h2

[@silversurfertim2123]

The H2 just keeps getting better and better awesome video man . Can’t wait to hear it in person. 👍🏻✌🏻

[@Ksix1]

Heading out of town but let's get together when I get back in a few weeks 👍👍

[@aeror115]

Need this for my R💪 Thanks for uploading brother

[@Ksix1]

✌✌

[@turtlebone]

Very cool, Homie! Sounds awesome! 🤙🏼🐢☠️

[@Ksix1]

✌✌

[@VictorCruz-td6tm]

You needed a little more sound clips of it... maybe in different situations so we can hear it good!!

[@Ksix1]

Working on it ✌

[@gncbyron]

Thanks for the video, helped out alot..Quick question..Just installed mine,,Damn is it loud..Question is when your at the same speed does yours still make a little noise like a little air is coming out of the BOV?

[@jmrebuffel3686]

Si vous remplacez la dump valve d’origine par la Turbosmart, il faudra effectuer unecreprogralation de votre boîtier électronique, sinon vous prendrez de la puissance à haut régime.

[@andyatoph]

very nice H2 videos from your chanel. i got a H2 recently , trying to remove the left fairing, but there are 2 cables connected the left hand side of fairing. i tried hard to dis-connect the cables, but they seem too tight, and i was noty sure if to life up or press down the connector clip for disconnecting ? appreciated if you can give some tips ? thank you.

[@1fast5.0]

What did you do with the hose that came out of the purge canister to the bottom of the tank?

[@SublimeGreenV4]

I should have done this when I did my intercooler...now I have to go back and do it XD

[@Ksix1]

Oh no!!!! 🤣🤣 I wish I could have done an intercooler now I'm trying to space these things out a bit.

[@SublimeGreenV4]

@@Ksix1 I understand, it's not cheap lol that's for sure. It's the first thing I did...living in the southeast it was a must so I got it over with.

[@jameskistner178]

Why wouldnt you just delete the purge valve threw woolich wouldn't need the purge valve or any of that other junk in there

[@AmbaSnakeman]

Hey, i recall in one of your vids, u mentioned it was a pain to remove the rectifier regulator connectors. Any special tools helped? I have tried on 3 occasions and failed.

[@Ksix1]

Special tools: Beer and tears 🤣

[@KB-xf4gf]

Can the BOV also be installed if you have not made any changes to the engine? i would just like to have this special sound... does it have to be configured on the control unit or just install it and drive off?

[@Ksix1]

Nothing to configure. Install would be exactly the same. I wasn't sure why I wasn't getting throttle response and being able to run diagnostic was helpful to know what i had done wro g. I will say thay if you are going to dig into the H2 to install a BOV, you might as well tackle everything you might need/want to do while it's already open.

[@aarondavis1096]

Seems like a lot of headache for a little purge valve.

[@gwood3372]

Where did you order bov ? Want to install one

[@Ksix1]

Extremecreations.com.au

[@MrLoveglov]

Did u disconnect the battery

[@Ksix1]

Yes.

[@36clubby36]

Nice video! What's the tuning kit log box you have?

[@Ksix1]

It's the woolich racing M log box that comes with the kit.

[@Themayseffect]

What is the purpose of putting on the bov? Is it needed for other modifications?

[@Ksix1]

I cant give you an extremely technical explanation of what it should do.... but I can say that the way the stock BOV was routed, all the unused air was rerouted back into the supercharger. By this point the air is HOT and cooler air compresses better. The new BOV removes that and let's all the unused escape. This makes sense to me. It also feels like it smoothed out the throttle a bit. Could be in my head but it feels smoother. And best if all, that PSHHHH should just rocks. Adds that extra vibe to the symphony of sound the H2 makes Between the exhaust, the SC spooling and the BOV.

[@Bahasabahas]

I think it might be dumped some gas from the extra injector

[@Ksix1]

Huh?

[@Bahasabahas]

@@Ksix1 I see some video that showing the bov works on h2 and when its open, the small of fuel sprut out, maybe from the 4 extra injector before the throtte

[@MotorcyclesforTallRidersNow]

Rediculous. I want one.

[@GHOSTNINJASD]

more like 6 beer job

[@Ksix1]

2 extra beers for the block off plates and 1 because I kicked the floor jack and hurt my toe. 🤣🤣🤣

[@GHOSTNINJASD]

@@Ksix1 hahahaha

[@loganj.2329]

Omg I hate watching people struggle with simple stuff. Some people can do a headgasket or clutch or have half the engine tore apart and back together and all within a couple hours and others spend 2days on clamps or filters lmao. Sorry but its funny

[@Ksix1]

I like to take my time. Zero rush to get things done. And when you are ripping apart a $40,000.00 motorcycle, taking your time and doing it right is never a bad thing 🤙