Overview of ordering and installing a 4DPF.com "Emulator" kit on a Kubota M5-111 to fix a problem with the DEF system. There is a lot of information here! This particular kit fits the Kubota V3800 3.8L Engine.
Пікірлер: 49
@rogerdivdis7277Ай бұрын
Outstanding presentation and topic ! I like the way you talk!
@OldBarkerRanch1981Ай бұрын
Thank you!!
@MitchS10016 ай бұрын
Great video, perfect delivery and explanation. Thanks.
@OldBarkerRanch19816 ай бұрын
Glad it was helpful! Thanks for watching!
@J-Man-sk8kg2 ай бұрын
Thank you for the video. I have the kit for the v2403 engine…pictures in the instructions look nothing like my engine…this will be quite the learning experience.
@OldBarkerRanch19812 ай бұрын
Its really not a hard job. But I can promise you that you will not regret doing it!
@OldBarkerRanch198129 күн бұрын
@J-Man-sk8kg shoot me an email and I will help ya out. Should be a pretty easy fix.
@NW_Shenanigans5 ай бұрын
I’ve been hoping someone would post a video of this system in action, thank you! Would you mind sharing ballpark cost? I’m beyond tired of regens on my M5660.
@OldBarkerRanch19815 ай бұрын
Well it so happens that I have an extra kit but… I don’t believe it fits the M5660. The kit for the 3.8L was just over 2k with the exhaust piece. You should definitely contact 4DPF.Com and see what they have for your machine!
@splash28154 ай бұрын
@@OldBarkerRanch1981 This was exactly what I was hoping to find. Great video - Thanks. I also have an M5-111 (I'm in central Texas). I've had my DPF system go down twice. Luckily within warranty. Now outside of warranty so looking to head off the future problem I just know will happen. Are you interested in selling the extra kit? If so, I am interested in it. Not sure if you do installs or if it was just a favor for a friend, but if you did, I'd be interested in that as well, otherwise, doesn't seem too tricky of an install.
@OldBarkerRanch19814 ай бұрын
If you would like to, email me and I’m sure we could work something out! My email should be under the “about” tab for the channel.
@user-fu2vv2ob3n6 ай бұрын
You mentioned being able to revert back to stock if needed. I would wrap that harness plug up and keep it clean or else it will be corroded in the future.
@OldBarkerRanch19816 ай бұрын
If you are talking about the main harness to the ECM then yes, I had planned to dielectric grease the plug and wrap in up. I am also going to remove the ECM and put it with the DPF filter on the shelf. But good advice for sure!
@splash28154 ай бұрын
Great video, Thanks. New subscriber here. Looking forward to future content.
@OldBarkerRanch19814 ай бұрын
Awesome, thank you!
@splash28154 ай бұрын
@@OldBarkerRanch1981 YW. Sent you an email. From Reily
@garygrow83736 ай бұрын
Good video. Thanks!
@OldBarkerRanch19816 ай бұрын
Thanks! I hope it helps someone out!
@robertkutz6 ай бұрын
COOL VIDEO.👍👍✌✌
@OldBarkerRanch19816 ай бұрын
Thanks for watching!
@mikesanders85974 ай бұрын
Have you had any dealings with a Kubota B3350 tractor and this kit
@OldBarkerRanch19814 ай бұрын
Sorry, I have not as of yet. But if it has the 3.8L then it will work.
@robertfrye34422 ай бұрын
Does your machine still regen after putting it on
@OldBarkerRanch19812 ай бұрын
It does but in 100 hours it’s done it once and it was over in less than 3 minutes. This is what I have been told.
@AustinWhittaker-j4oАй бұрын
Hey man , do you still have any kits for sale , I looked everywhere for your email on the about page but cant seem to locate Thanks
@OldBarkerRanch1981Ай бұрын
Send me an email and we can get you sorted out. My email is under the "About" section for this page
@scottmoss67593 ай бұрын
I have a Kubota L3901 it has a regen system, it's a pain in the @$$, about every 15 hours, I have to rev the engine nearly to redline for about 15-30 minutes. Emissions are ruining everything diesel.
@OldBarkerRanch19813 ай бұрын
That’s why I was so excited to find 4DPF.com! You can do away with that filter and the regen bs for good!
@ricksanchez74594 ай бұрын
Wow just 800hrs and it's had that much trouble. They dont make em like they use to. Definitely charge enough for em though...
@OldBarkerRanch19814 ай бұрын
Right! Although I hope this one was a rare case but either way, everything that caused all the problems is gone now!
@adamsgrizzly015 ай бұрын
Do they have for a 299 d2 cat skidsteer
@OldBarkerRanch19815 ай бұрын
I believe so, what engine is in it? Size or model
@lancesagers70655 ай бұрын
Is this system still running with no issues?
@OldBarkerRanch19815 ай бұрын
It is!! I Actually got two more of these kits if you need one. Its been flawless! and I believe we got a little more HP from it..
@OldBarkerRanch198118 күн бұрын
Well over 250 Hours and running great!
@OldBarkerRanch19815 ай бұрын
Part 2 Coming soon!
@RJMachine622 ай бұрын
How soon? I'm curious. Thanks for the video on this. My 2022 M5-111 hasn't had any DEF / REGEN related issues in the 2 years I've owned it, but I think they ironed most of them out by now, or hopefully they have. I heard they had total hell with them for a couple year prior to that though.
@OldBarkerRanch19812 ай бұрын
They absolutely did have problems with the earlier ones. What I have found is if you have the 4 speed gearbox, expect def problems. If you have the 6-Speed gearbox, seems they have been pretty good.
@RJMachine622 ай бұрын
@@OldBarkerRanch1981 Wow, didn't know that. I have the 18 speed. 6 speed Hi/Lo with push button splitter. Reminds me of my old 1650D oliver with the instant under-drive.
@OldBarkerRanch19812 ай бұрын
Yeah that’s the newer one, you should be good but like anything def.. it’s not “if”, it’s “when”!!
@kmb9572 ай бұрын
When my tractor starts to have DPF issues, im gutting it before i spend any money to fix it.
@OldBarkerRanch19812 ай бұрын
You can do that but expect it to go into limp mode within a few minutes. You can’t simply gut the DPF and keep working.
@jeffjames9568Ай бұрын
So they found the problem after the warranty was over .. interesting