I had p0491 on my n51 e92, and code remained even though got a new air pump, new check valve, and new hose. Found out there was moisture in my hose that was messing up the flow. And triggering the code Fox was: removing both hoses connected to secondary air pump, Spraying a little isopropyl alcohol into the pump and both hoses. Let it dry. Been good since then.
@miguelangelfloresflores54096 ай бұрын
THANK YOU!!!! I didn't know what kind of tool to use!! I was going to use a wrench,,, yet,, it was hard to get to!!,,, I got a wrench!! Thank you again, BOSS!!!!
@valerianpantsulia17304 жыл бұрын
After all..........God Dammit today's BMW brand///// Nice video and Good job, it was very interesting. Thank you ///////////////////
@sipmeister36117 ай бұрын
Appreciate the knowledge ive had refurbished a air pump it it working but making an clogged exaust noise I assume it’s this thanks
@perspolis18185 жыл бұрын
Excellent video. Professionally done
@derekrostock15963 жыл бұрын
Thank you for this video! Question. I’m building a 128i track car and will be deleting anything not essential to performance. Do you know if deleting the SAP will decrease performance either by messing with AFR’s via the O2 sensors or the DME somehow cutting power? Just curious if there are any negatives to deleting this other than emissions. TIA! Cheers
@El_El_Guapo Жыл бұрын
Hello, thank you for the video. I can blow through mine, but I am met with resistance and have to blow pretty hard. Is that normal or should the air blow freely
@jomartacut35596 ай бұрын
Same problem here. Is this normal or a sign of faulty valve?
@El_El_Guapo6 ай бұрын
@jomartacut3559 mine was faulty. I spent a lot of time and effort into cleaning it hoping to unclog it. Reinstalled multiple times and retested, nothing worked. I ended up buying a new one. Strangly the new one seemed exactly the same, but cleared my code. This was a total nightmare for me. If possible, save yourself the trouble and just buy a new one. Don't go to pick and pulls because if you do find the correct valve, I guarantee it will already have been tested and is faulty. Good luck.
@jomartacut35596 ай бұрын
Thanks much. I’am having the dealer look at it as its under sulev warranty.
@ArieteArmsRAMLITE6 жыл бұрын
thank you for taking the trouble
@JoseGarcia-br3uh4 жыл бұрын
How you clean the air ports ?
@sergioferreira35893 жыл бұрын
Hello. Good video My ports are clogged in the head. Is there a way to clean them without pulling head out. Ty
@jaxonhundertwasser30682 жыл бұрын
Hi, we’re you able to figure this out? I may have the same problem with my e90
@nahtannoJv8 Жыл бұрын
any update on this?, one of my ports are clogged as well. I am letting it sit overnight with crc carbon cleaner to see if it helps. I am at 156miles so no SULEV warranty for my N51
@dferrari8884 ай бұрын
@@nahtannoJv8 Did the CRC carbon cleaner work for you?/ did you spray it directly in those two holes there with that valve disconnected?
@nahtannoJv84 ай бұрын
@@dferrari888 it didn't work, and I did spray it into those two holes
@scytrex969415 күн бұрын
@@nahtannoJv8hey, did you ever fix the problem?
@donaldwhiteman32245 жыл бұрын
Beutiful video
@BeemerReborn7 ай бұрын
Mines had burn oil in the ports, I sprayed parts cleaner and ran a brush through it and now I don’t get that burning oil smell out the exhaust when the engine gets hot.
@leo48704 жыл бұрын
I have a p0492 code what’s the most likely to be the pump works the valve has been change relay is good
@Chris-wp3ew Жыл бұрын
HI there... Is that the secondary air injection valve or the EGR valve? I'm looking to replace the EGR valve and multiple sites shoe that exact part as the EGR valve. I'm so confused...
@kyhomegarage3430 Жыл бұрын
It’s secondary air injection valve.
@xsil20x5 жыл бұрын
Hi I’m having same problem with my 08 e90 as the ses light is on for secondary air pump insufficient flow bank 2. I’m curious how did u clean/unclog the air ports ?
@jaggercole88783 жыл бұрын
you probably dont give a damn but does anybody know a method to log back into an instagram account?? I somehow lost my password. I would love any assistance you can offer me
@daxtonharrison82083 жыл бұрын
@Jagger Cole instablaster ;)
@jaggercole88783 жыл бұрын
@Daxton Harrison Thanks so much for your reply. I found the site thru google and im in the hacking process atm. Looks like it's gonna take quite some time so I will reply here later with my results.
@jaggercole88783 жыл бұрын
@Daxton Harrison it worked and I actually got access to my account again. I am so happy:D Thank you so much, you saved my account !
@daxtonharrison82083 жыл бұрын
@Jagger Cole glad I could help :D
@smooveking7734 жыл бұрын
Mine has zero air flow can i soak it in breakcleaner or would that even work
@kyhomegarage34304 жыл бұрын
Smoove kings I don’t think it would. Just get another one.👍
@smooveking7734 жыл бұрын
@@kyhomegarage3430 okay thanks
@radekskreczko3 жыл бұрын
my ports are clean, changed the pump, changed the hose, check valve is working as I tested it like in this video and still check engine light is on, I don't get it is there something else part of the secondary air?
@kyhomegarage34303 жыл бұрын
Does your pump actually runs. Do you hear it when you first start your car?
@radekskreczko3 жыл бұрын
@@kyhomegarage3430 yes it does
@jaxonhundertwasser30682 жыл бұрын
@@radekskreczko Did you find a solution to your problem? If so, would you are to share? I have a similar problem and I can't seem to figure out what the issue is. Thanks in advance!
@radekskreczko2 жыл бұрын
@@jaxonhundertwasser3068 no I did not, I have the check engine light on, but emissions are do in 6 months, I will take it to a mechanic in a month to fix that, I'll post once I get it fixed... Did you get to the solution?
@jaxonhundertwasser30682 жыл бұрын
@@radekskreczko yes, I did! If your issue was the same as mine: P0492 (or P0491, but not both): I bought an O2 sensor safe carbon cleaner with an extra long hose + a sheet of cork gasket material. • Take off the secondary air valve. • Cut the gasket material in the shape of the secondary port and poke a small hole for the hose of the carbon cleaner. • Get the hose as deep into the secondary port as possible and blast the carbon cleaner. You’ll see the carbon accumulate along with the fluid at the entrance. • Let the cleaner evaporate and clean out the carbon. • Repeat (even turn the engine on intermittently while the secondary valve is off to ensure all the carbon flies out and to burn some of excess fluid). Bonus: carbon clean the secondary air valve in the meantime. Hope it works!
@oshinaslanian32217 жыл бұрын
Ramon, why were the oxygen sensor voltages so high? Is that like a European thing?
@kyhomegarage34307 жыл бұрын
Hi my friend this car uses AFR or wide band air ratio sensor. You will see these type sensors more often in future. Any car manufacturer are using these sensors now. 2.00V is lambda 1. Voltage above 2V will indicate lean and voltage below 2V indicate rich condition. I know this is confusing. They are different from O2 sensors. Hope this help.
@oshinaslanian32217 жыл бұрын
KY HomeGarage Got it, I thought it was just a regular 0 -.900 oxygen sensor.
@denstylerzofficial7 жыл бұрын
so as u tested the valve is it means GOOD valve?
@kyhomegarage34307 жыл бұрын
DenStylerz Official - Best Mixes yes sir this is good valve. On this car exhaust manifold port was clogged up. Cheers
@denstylerzofficial7 жыл бұрын
KY Home Garage KY Home Garage and if the air flows 2 directions ? Help if i cleaning?
@PJR12345675 жыл бұрын
@@kyhomegarage3430 hello, how did you go about unclogging the ports?
@kyhomegarage34305 жыл бұрын
Paul R. I used screwdriver and wire brush. Nothing special you just need to clean build up of carbon deposits .
@TheRedcroatian4 жыл бұрын
@@kyhomegarage3430 thank you so much for this info, I believe that my problem. Last time I took it off I saw tons of carbon build up but didn't bother to clean it. I just bought new gasket because the old one looks run down but I think carbon build up is the actual problem. BTW, I have a 2004 330xi but same principle!
@HighIntentions-3 жыл бұрын
There is white smoke coming from my vents as soon as I turn my car on, I opened the hood and it is coming from that same side. Is it possible that may be the reason why? Because I have to change that part or maybe something far worst?
@kyhomegarage34303 жыл бұрын
Do you smell burning oil. Most likely your valve cover gasket is leaking and engine oil is dripping down onto hot exhaust.
@luisbg83195 жыл бұрын
Disculpe amigo, a la valvula de mi bmw2003 325i le soplo y no sale aire por el otro lado. Y me arroja estos codigos p0491 y p0492.
@gabrielmarquez57843 жыл бұрын
Que isiste para areglarlo???
@RodriguezSteve3 жыл бұрын
@@gabrielmarquez5784 Replace your secondary air pump
@gabrielmarquez57843 жыл бұрын
On mine it says bank 1
@angelatrujillo36823 жыл бұрын
I have code p00bc , p0171 and p140A
@coolexperiments205 Жыл бұрын
did u find out what the p140a code was for?
@usace693 жыл бұрын
اول مرة اشوف عربي يفتهم !!
@jcoach30642 жыл бұрын
I can’t blow through mine at all
@SubliminalMessagesTV Жыл бұрын
Hope you replaced it by now lol
@jcoach3064 Жыл бұрын
@@SubliminalMessagesTV 😂 replacement for what I just deleted it it's incredibly pointless piece of metal and took out my own headers put in catless headers and straight piped it
@El_El_Guapo Жыл бұрын
I can blow through mine, but I am met with resistance and have to blow pretty hard. Is that normal or should the air blow freely?
@jcoach3064 Жыл бұрын
@@El_El_Guapo I ended up deleting it,just remove ut its pointless really