Godox v860ii Tutorial: How to Trigger the v860ii + other Basics

[@stellakoga8067]

Hello so what softbox to use this flash?

[@SeeItLoud]

Hi Stella, this is the diffuser I have used for many speedlights for ages... in fact... this darn thing has outlasted a lot of my actual flashes haha amzn.to/33MhqFM

[@stellakoga8067]

@@SeeItLoud thanks alot ☺️

[@thelbertmcgee7992]

Link doesn't work​@@SeeItLoud

[@oopurplehazeoo6321]

Mate, I have just sat for 5 hours trying to figure out how to use this flash (first ever). I've watched about 8 other videos now and yours is the only one that explains in detail what everything does. I feel so much more confident in using the flash!

[@kefkapalazzo1]

That’s crazy I figured out how to use it in 5 minutes lol

[@mykelbankz]

2 years later this video just saved me. I was already confused with the whole slave mode thing. God bless you man! Thanks

[@stankmt5016]

Bro, you have no idea how life-saving this video is! I've been tearing my head up with the stupid menu but you made it so simple to understand!

[@SeeItLoud]

Bro, you have no idea how much this feedback means to me! I’m super happy to help and appreciative of your reaching out!

[@dbmckeever]

Yes… this manual is really bad!

[@ruthjones1991]

I have struggled for what seems like forever to figure out how to get my Godox flash to work correctly. I could probably have struggled forever if I hadn't found this tutorial. So helpful!!! Thanks for such a basic but complete explanation of setting up the flash with other flashes or trigger.

[@akshayjaiswal1600]

as for now i have wasted nearly 4 hrs but couldn't got understand anything but this video is what made me learn everything about the flash so easily...... thanks mate for such nice tutorial!!!!

[@SeeItLoud]

Happy to help Akshay!

[@radishcastle]

Brilliant beginner tutorial. Thank you. A lot of the others assume a foundational knowledge of flashes as a whole, whereas you clearly explained everything. Subscribed.

[@SeeItLoud]

Thanks for the feedback Sandra! I’m happy to have been able to help.

[@jody1622]

This was sooo helpful. I just got it and could not get it to work with my Sony a6600. On another site I had read that the radio button had to be used with non-Sony flashes so I used that and nothing happened...arghhh! When I watched your video I finally figured out that the camera thinks my Sony Godox 860ii is a Sony! All of a sudden it all worked. What a relief. Thank you!

[@Greenwitch_Garden]

Thanks so much! I’m a visual learner so reading a manual hurts my brain lol!

[@TravisKelleher]

Thanks Kyle! I just bought a pair of V860II's and a trigger, this helped me get up to speed right away.

[@SeeItLoud]

Hi Travis, really glad I could help you get up and running! The more people out there taking more pictures.... the better! Thanks for your feedback!

[@jsr8884]

Can’t have a better video on this subject. Thankx a zillion for explaining so very lucidly.

[@tmewborn1]

Thank You this has helped me. I have had issues using their Controls. Really appreciate Your time. I like the Godox Flashes. A few Years ago I bought the set of two V860II and Xt Controller to use as a small home studio in My Lana. Until now I have not used them as they were designed to use. With Your help I will now advance in using them,

[@622superpro]

Ive just had one delivered today. So far so good. Getting a second Godox 685, also have a couple of Neewers, a Sigma and a Canon. Now I can do flash arrays again like I used to with my film cameras. Love the manual cut down. Cooking on gas again re flash.

[@1946gsp]

VERY helpful. Was trying to use a Godox trigger. Now I see what I was doing wrong. And also learned how to group my other flashes. THANK YOU!

[@SeeItLoud]

Happy to help Geoff!

[@hayabusgtr]

best godox tutorial

[@user-xz1hk3oe3g]

four years old and still so helpful, thank you! Annoying how confusing the speed light settings are.

[@devonlarocque8982]

Hella helpful! U mentioned everything I needed to know. Imagine I got everything set up in one video with the help of one video.

[@ommediallc]

12:10 only works when the v860ii is NOT in the hot shoe. Otherwise, this will not work in Master Mode and fire the other Godox flashes in the room. If you take it out of the hot shoe and use a transmitter, it will work. The Master mode is not available when the camera is in the hot shoe.

[@anthonynguyenau]

Hi, what setting when using Sony flash 32M to trigger Godox 860. Thanks

[@AliasJimWirth]

This is an excellent video. I just got a Godox v860ii, and this information is really helpful to me, filling in the vague areas in the manual, and more. Thanks so much for creating and posting this video.

[@ChosenGamingIndividual]

Definitely helped out a lot, thank you for this!! I have a Godox X1 hotshoe trigger that I've been trying to get working with my V860IIs for ages now, and never got them to connect. Now that I actually understand how the menu system work, got it up and running within a minute. Thanks again!

[@SeeItLoud]

Hey there chosen gaming! Really happy to help! Reach out if you ever have other questions getting your gear up and running!

[@heymikeriley]

This is the most important video on KZbin.

[@jaw31947]

I don’t understand it all but enough to remote trigger off camera flashes. Thanks.

[@Zero-is-infinite]

this was 🔥only thing worth adding is that the shoe mounts are built like 💩but are easy and not expensive to replace

[@mshavrotscanadianuniversit6234]

Could you please do another video with the V1S using the Godox X1R-S and X1T-S? I am SO lost as a beginner flash user with my A7Rii.

[@SeeItLoud]

Just got the V1S sent to me! doing the review and will be making a similar tutorial soon!

[@DivineAtheistWannabe]

I just bought a speedlight and tbh still very confused. But thanks for the video. Maybe it will make more sense in the future

[@szetochristina4581]

The most comprehensive tutorial I have ever seen! Thank you!

[@CuriosityFilms]

Thank you for the systematic, thorough tutorial It definitely helped me! The only part I was stuck was syncing the V860ii(Sony) to the XPro (Sony) trigger. I could have used a bit more coaching there. I ultimately powered off both units and was able to synch them. I'm not sure if the powering off helped? Or if I was just pressing one button wrong. Also, changing channels was a bit tricky for me. I had one unit set to channel 1 and one set to channel 20. I would not have gotten these two devices to work without your tutorial thought. Thank you so much!

[@milesgommeimages]

To correct you, you can control other Godox speedlights wirelessly regardless if they are the Nikon, Canon, Sony, Fuji etc versions. That means manually & in full TTL!!

[@Justshanedavis]

Thanks for saying “all intents and purposes” instead of “all intensive purposes”. 😂. It’s the small things that make me hit the subscribe button. 🙌

[@smuuvstudios1432]

You got the best tutorial on KZbin for these flashes man. I’ve watched a lot of confusing videos smh. I liked and subscribed. 👏🏿

[@SeeItLoud]

+Smuuv Studios appreciate the feedback and happy to help!!

[@jameswang4706]

Thanks for the tutorial. Still having problems getting my V860IIs to be controlled by my X2Ts. I've got the strobe set to "Radio-Slave" mode, group A Channel 1. On the X2t group and channel are the same set. Wondering if you've worked with this combo and might be able to do a step by step tutorial? Thanks!

[@Kayotified]

I use the same combo, just had a major issue as well , heres the solution; Make sure your in slave mode with the radio symbol in the top left corner not the orange slave mode with the thunderbold in the corner. So my question to @see It Loud is ... you didnt explain the difference between the 2 slave modes if im not mistaken... could you please advise?

[@mbiehl2]

Very nice video on how to setup the Godox Flash in S1 and S2 mode. Worked great!

[@victorpaul6075]

This video Save my day & time .. very Informative vidoe & well explain God bless you brother

[@pogolas]

You are a life saver. Could not figure out, how to make my RX1, trigger Godox V860 II C. The x-pro C, do not fit in hot shoe.

[@SeeItLoud]

Happy to help!

[@yunghollywood545]

Man thank yo so very much for this video I thought my v860ii was broke

[@ncee1372]

I have just started flash photography and this was a great tutorial! I have this exact flash with the trigger on my new Sony A7iii. I hope to get lots of use out of it ! Thank you !

[@SeeItLoud]

I'm super happy I am able to help, Nancy! Happy shooting! if you ever have more questions come on back and leave me a comment!

[@purestress2]

What trigger do you use?

[@bighunanballs]

one thing you didnt show was a sony flash wirelessly triggering the godox or vice versa. You mentioned that the oem specific godox flash will communicate wirelessly in the oem specific wireless protocol so i assume youve tested out having a mix of sony strobes and godox strobes communicating with each other in various master/slave configs?

[@drewwilliamson3604]

I was following along until you got to the zoom portion but I cannot get the zoom portion to change anymore. It's stuck on 14mm. I pushed a button on the right that changed the S1 to S2 to nothing on the screen. Don't know what this is. Tried resetting the flash with no luck. Any idea how I can get this back? Thx

[@gregorycorneliusmusic2555]

This is the best video so far on the V860 thank you very much 🌼

[@lingxiaoyue9927]

A great demonstration! Thank you.

[@Boot_Ma9net]

thank you for this tutorial. Got it working finally. Only thing is I cannot change the mm from 14mm with dial, seems stuck but dial works for other things. Sure then net will help. Thanks again

[@SeeItLoud]

Hey, happy to be able to help! And for changing the the zoom, gave you ever been able to and now it’s not working? Have you tried in straight up manual mode just to validate it works?

[@Boot_Ma9net]

@@SeeItLoud will try. Thanks. I don't know if it's ever worked I've had it a while and never got to grips with it. On the plus side I did get good at natural light use. I'll try manual and thanks again

[@laurenstonefield134]

thank you for the tutorial. it's so much better than the IFU included in the box!

[@SeeItLoud]

Happy to help, Lauren! Happy shooting!

[@johnpark1602]

This is an awesome video - this should be godox's official tutorial! :)

[@SeeItLoud]

+John Park haha thanks for that glowing review! I’m happy to help!

[@Nvr2old2tri]

Thanks Kyle, just getting started with flash photog. Will keep it bookmarked for future use!

[@SeeItLoud]

Glad I could be of help with your starting flash photography Lori!!!

[@AlohaMichaelDaly]

Great instructions. The trigger can be set to min flash power of 1/256 but I can’t get my V860ii c to go beyond standard 1/128 ??

[@GOTPIPS]

Thank You So Much It was so specifically helpful. I can't believe how much information you gave about this product

[@robthemedia]

Great tutorial in 2024!

[@memoriesbysatyam5320]

One of the best. Do you have any idea whether in these flash F assist beam working or not

[@masbass1011]

Excellent tutorial. I have a question. When i put my 860ii into slave mode, two lights flash on the front of the flash. Do i need tbose lights flashing? How do i turn them off?

[@ajliem10]

Thanks for the video. Could you tell me how to set up the camera (and the speed light) to operate in the "second-curtain sync" mode? The manual says setting the "flash mode" on the camera (Sony a6400) to "Rear Sync", which I did. But it still does not work. THANKS.

[@emiliecotterill3118]

Thanks for this! Really helpful :) There's one thing I still cannot work out… Can the V860ii and the camera (in my case, an A7Rii) communicate wirelessly without a trigger? Or would I need an X1T or equivalent in order to use the flash off camera?

[@thimoestroll]

Exactly the question I have now, my yongnou does this, haven't figured it out yet with this one.

[@matthewcheung5136]

can you make a video on bounce flash off different ceiling shapes and colours?

[@ignacioschmidt1981]

Hello! Great tutorial! Thanks! I use this Godox flash with Sony A7iii, and there is a significant lag time between pressing the shutter and the firing of the flash. It only occurs in TTL mode. Any suggestions on how to eliminate this lag time?

[@Laurdien]

Thanks for the helpful video on the flash. I’m having a difficult time using the X1T-s trigger with mine 🥴 Any suggestions on a good tutorial with the V860II-S ?

[@stephanejumet381]

great, complete explanation. thanks for this video

[@dbmckeever]

Hi Kyle… excellent video… really easy to follow! But I’m having a rough time trying to get my Xpro trigger to fire the V860ii-S. I can get the 860 to fire my AD200pro in master mode, but I can’t fire the 860 in slave mode with a trigger. Any ideas?

[@jamespayne4759]

Great video !!!!! You are a very good instructor, you explain things well. Jim, Charlotte, NC.

[@susandoverspike576]

I can make my 860ii talk to my Godox Ad 600 pro (two of them on separate groups) and my eVOLV 200 R2 (also on a separate group). But I can’t make the 860 change the intensity of the flash. I have to go to each flash and manually change the intensity. If I go to group, set; =/- it won’t get read by the external flash to change. What am I doing wrong? I’ve reset the 860. And used your video to connect the external flashes back to the 860.

[@markwagner1328]

I have a problem. When I've got my V860ii in Master, the high speed sync HSS , I can't figure out HOW to turn off the HSS mode. Drives me crazy! Can you help me? Thanks in advance.

[@areebacouture206]

Hi, lovely video, really helpful. But my images get darker when i use the flash any suggestions why this occurs?

[@virtualcurbappeal8637]

I know this is an old thread, but I cannot get the V860II to trigger two slave flashes at the same time. They are in the same group, on the same channel, and both work fine when the V860II is triggering them one at a time, but I need them to fire at the same time. Any suggestions? One is a Godox AD200 and the other is a Nikon SB-600.

[@vanakevorkian1433]

My flash keeps saying "Set your camera" and is working only in slave mode while it's on my camera? The flash is firing before the shutter on TTL please help!

[@roncockerham3569]

When I reset to factory and turn on and off. It does not arrive at the window that yours does. Nor do the settings read the same as they do in this video. So I can’t start where you were starting,

[@tbenjamin4475]

Hello, I have a problem with mind. I just bought the godox V860iis for my sonyA7III. I set on it but when I try to use it, it written on the screen of the flash "set your camera". When I take a picture, the flash fires but the picture isn't affected. So, I checked my setting menu on my camera and "wireless flash" is ON. Can you help me please ?

[@zsozsousa1]

This flash can be charged from battery powerpack?

[@angelwhitbeck4233]

I have an 860ii C not S and cannot figure out how to get it to be a master and trigger my other godox. The menu is different than you're showing Help?

[@Jonathancasson]

Hey you didn't go over how to pair the trigger to the flash. I was with you until you did that. Is that available?

[@werbefotografie]

Hello, thanks for the video. You are very familiar with the devices, great tips! I have a question and can not find a solution: if I am in slave mode and the flash is unleashed via the X1T trigger - the flash unit flashes red on the front at an interval of 1 second for the entire time. Can you turn off this stupid blinking somehow / somewhere? It's frustrating!!!

[@silvirichardson]

Questions answered, thank you!

[@davidmassey3607]

I have one V860II S that has SONY on the screen, it fires remotely with the XPro. The other v860 does not have that SONY on the bottom left of the screen and I can't get it to fire. All the settings are the same (I think). It worked at one time with both flashes firing. I can't figure out why one won't fire.

[@natasalvatori1082]

thank you for the info. How do I make sure my on camera flash is firing every time when my Drive Mode is on High continuous shooting? I seem to be missing some shots if I'm trying to catch something faster

[@chriscorbin9565]

Hi, struggling to use hss with the x1t trigger. I thought the trigger had to be in manual while the flashes are in ttl but i'm obviously doing something wrong. Flases are orange screen with radio icon, trigger in manual. I can't seem to get the hss symbol come up. Any ideas? Cheers 👍

[@viragmahorkar7184]

VERY USEFUL VIDEO. 17:36

[@GemmaLouise94]

This was so helpful, exactly what I needed to know. Thank you so much.

[@SeeItLoud]

+GemmaLouise94 happy to help!

[@sulphuricacid16]

My flash only worked once and when I was gonna use on an event it never worked...it turns on all right but when I put on camera it doesn't flash also when it's not on the flash doesn't trigger...funny though is when I mount the flash on camera and turn off the camera the flash triggers when I press the red button

[@o.aldenproductions.9858]

The screen doesn't look like mine 5:49 Im on canon and it has something called FEB??

[@chris_woodman_photography]

Hi, great video and easy to understand but i have a question please. Can you use the godox X2T trigger with the flash mounted on top of it and then fire a slave flash somewhere else in the room? I feel more comfortable if I can control both the on camera flash and the slave flash from the trigger. Thanks

[@poblanophotography]

Great video! You ecxpained it well and you helped me tremendously. Thanks

[@MarkBach]

Nice overall review of this flash

[@SeeItLoud]

Thanks for the feedback mark! Happy to help!

[@chantellesparephotography1166]

I'm am struggling to get my nikon v860ii to work alongside my sony v1 and trigger xpro s I found that if I turn the ID on the v1 flashes but the v860 doesn't and the ID off the v860 flashes but not the v1.. what he heck am I doing wrong

[@mehranvahediasl9278]

hi . when i take photo with flash it uses pre-flash and the flash on and off twice . I want to disable pre-flash . could you guide me to disable that please ?

[@meldajeanphotographyfilm3543]

Hello. Great video. How do you take off the RMT? I use it as a slave when I do weddings. I will set it like I'm suppose to then I put it on my camera and it goes back. Had some bad pics from it at my last wedding.

[@GEMINIJAPAN5]

Want to ask The flash blinks 3-4 times, not in sync with the shutter When the shutter is fully pressed, then released, then the flash blinks 3-4 times, sir, why is this? I have restarted but still the same, can you help me?

[@h.e.palmer6430]

My godox trigger won't connect to high speed sync with my Godox flash. Am stuck and 250 of a sec. I have a nikon d610

[@tareqrashdan3151]

hi I have the godox v860 ii c for canon I use two flashes with 2 soft boxes and trigger them with a godox x1tc wireless trigger to trigeer both flashes with a macrolens to get photos for teeth, the problem is although I am putting it on ttl mode and both flashes fire the flash is too low that the camera compresates by elevating the iso to 1600, how i MAKE THE TTL work to increase the power of the flash automatically so I do not have the iso leevated that much my camera is canon eos R

I gave you thumbs up but I gonna tell you why I don't like this video yet. I think you should start the content using only godox gear. BTW, you should first present all the gear that you will use and after it fo for the content. The second step would be go throught those other gear options. My 2 cents of suggestion is for you to use gels to better demonstrate the lights firing. Anyway this video was very usefull and saved me a lot of time. Thank you.

[@RBztudio]

hi mate , love your video but i hv an issue , ok i got a ANDOER wireless trigger and 3 godox V860II for canon on my R5, they were working perfectly but only one shoot and i dont know how make them work. what would the best setup be to make them work at the same time trigger them by my ANDOER wireless trigger.. regards

[@joelwarren1858]

Kyle; I update both the Godox and Mk4 with Godox's and Sony's current firmwate and menus still don't work properly. By corrupted I mean when I press the mode button it fails to cycle through M, TTL, etc., when I press other buttons, it fails to cycle through the options. When I set the Godox in TTL and turn on the camera, the TTL switches to slave mode with no prompting on my part. I recall the Godox worked on my Mk3, but not on the Mk4. I'm guessing the hotshoe interface is different from the 3 to 4, but I'm only guessing.

[@MWB_logic_reason_respect]

Thank you so much. how do I change the group on the flash? i.e so Ad200pro is on A and flash on B?

[@babaaziz8943]

Hi Kyle and thanks for a clear video. I just bought Godax XTS and cannot sync it with the 860 II s. Any leads would be greatly appreciated.

[@amirsamir007]

Great Video. How can i turn hss with slave mode? I am using X1T. Thanks

[@elahehrezvani4169]

Hey. Thanks for the information. Can you help me with one problem?? How can I turn the 2beep flash into one?? I mean, mistakenly I may have pushed a wrong bottom so instead of flashing right at the moment it beeps 2times and the flashes. How can I fix it?

[@user-wm5tb4rr8y]

strange, i just bought a used V860 II and mine stops at 133 zoom... it is a fuji version. do you know why?

[@RexSingleton]

thank you this menu is so confusing. Trying to trigger other flashes optically is like complex math formula. I spent an hour trying to figure it out.

[@SeeItLoud]

+Rex Singleton thanks for the feedback! Happy to help

[@osamah.mohamed3629]

Hi sir , I have FT-16 transmitter for my studio flash (GT Gemini series) but I don't know if this trigger will work With this flash V860ii. Please let me know if my trigger will do the job

[@222rimantas]

How do I turn off the flash signal like shooting to prevent it from beeping?

[@simonjpierce]

This is EXACTLY what I needed. Thank you!

[@MawutoTetey]

I am using a Godox Ad600BM, V8600II and a Gododx trigger. How do I set the V8600 as a slave with its own power (not to use the power of the Ad600bm)?

[@auldreekiebiker8464]

Hi Great explaination video, I have learnt from it. However I was hoping that your content would have helped with an issue I am trying to overcome.. I have the V860iis with the X2Ts and the a7iii. Problem I have is that I cannot seem to get HSS to work, I have set the trigger for HSS and selected the Sync on the V860, I can even select 1/8000 shutter speed, but no flash when I press the shutter. Can you please tell me where I am going wrong. TIA David