Motorized Schwinn Stingray

The new Schwinn Stingray is a bike I wanted to build just for fun with no practical purpose in mind. To my surprise this little bike is kind of sweet to ride!
In this video I put a 2 stroke motorized bike kit on this tiny bike.
We upload motorized bike videos every week (sometimes more)!
For motorized bike help, join the server / discord

[@docedits7294]

Was gonna sleep, currently 4:50am, but motorized stingray more important

[@shagginwagons5992]

couldent agree more

[@netx421]

Good man always knows his priorities 💪

[@johnnyt2832]

Exactly that

[@jake91hall]

sleep is for the dead

[@darnelljackson233]

Ctfu 😂 🤣 I couldn't agree more

[@g1ngersnaps149]

A full suspension frame build would be real cool to see! (not because i just bought a downhill bike and need to see the process of motorizing it or anything, it has nothing to do with that)

[@Eduardo_Espinoza]

I love builds like these, where it's at the edge of everything.

[@1bottlefed]

I am 67 and in Jr High we used to call these Greasemobiles as the Greasers from the poor side of town were the first to build them. Back then we would remove the seat tube and use a bumper jack to spread the upper and lower tubes to make room for a Briggs and Stratton 3.5hp engine. We would then take the same bumper jack and spread the rear triangle (side to side) to accommodate a wider rear mini-bike tire while still retaining the 20" bicycle tire. Me and a friend took and Schwinn Orange Krate with the springer front end 16" tire and front drum brake and mounted a highly modified MC101 with an expansion chamber and two carbs and reed valves. It was so powerful you could take it up to 60 and open it up and it would wheelie......a wonder we lived through those days ;-)

[@aftertime8454]

I rushed to watch this video as soon as it came up good job

[@NicksBikes]

Isn't that seeutek a bit like the 400 year old hammer by now? New head, new handle, same hammer 😉

[@alexv4046]

Glad I stayed up 2:30 am in california cheers!!

[@kirstenspencer3630]

Exactly what a "Stingray " needs. Has the cool factor that doesn't look forced.

[@leyio7453]

I made one of these too and I used a ''women'' frame because it was too tight with my old stingray but I added a tube under the seat to fix the gas tank. It wasnt all that odd looking but now that I see yours I should've give myself the headaches of using a regular frame the results looks much better

[@GreaseMonkeyAuto]

I did a build very similar to this. It was a CCM Cougar. I rode it for a week, and had the hardest wipeout ive ever had. Got rid of that build fast. Damn that wheelbase.

[@GreaseMonkeyAuto]

It would wheelie though!

[@tonytaylor5087]

You’re so awesome dude!

[@LAHover]

You rock!

[@ArthronOfFir3]

welp, you have yourself a little guest rider build now. probably going to make one as well though probably going to change the pipe to my flex pipe and redo the paint job to a crimson red. also name this build the flying flea.

[@LAHover]

Love the name!

[@ArthronOfFir3]

@@LAHover btw they don't come with frint fenders, you need to get one that's aftermarket

[@scottdavies3914]

loved my stingray , used my paper route money to buy it, it was 57$ at the Firestone store @ 1967 I wonder how Schwinn quality is these days compared to back then…They were really good for wheelies nearly a unicycle lol…I enjoyed the video, and now at 240 lbs and 6 4” probably not very realistic. cheers..

[@LAHover]

Very cool!

[@skipstalforce]

Bike of choice for every kid in the Sixtys, cheers!

[@PaulThomas-qo9vy]

That looked fun LA, Thanks, waitin for the next vid., Cheers!

[@JMB676]

First let me say I in general and all around just love the big cause of what it is and how it looks and personally I feel the chosen color you got is the epitome of what I picture in my head when I think of one of these vintage bikes so kudos for that choice. Second I have to 100% agree as much as I think the pk80 is a very well made and put together motor out of the box I feel that the seeutek is by far one of if not the most reliable motor out of all the motors I've used to date they're just simple and they just work every time. And third I think it's just a great build all in all between the look The styling just basically everything that that bicycle has to offer as a bicycle makes it an incredible looking I am assuming feeling motorized bicycle. Great looking just a real fun build all the way around. Good job brother!

[@LAHover]

Thanks Johnnie! When a silly build turns out to be kinda awesome, it's a good feeling.

[@anthonymoralez4571]

I also built a motorized low rider with a lot of twisted parts from Mannys bicycle shop in Compton Ca

[@lbg5435]

looks great bro glad i told u about it. keep on building bro! thanks for the shout out. i was actually looking for a cranbrook lol

[@Littleevil9975]

Hell yeah bro awesome build I have the older one there super comfortable to ride

[@keeganhache6667]

If you ever have issues with the motor mounts are crooked try adding some washers underneath the back mount. I learned this trick when I had issues with the felt faker frame chain ring hitting the bottom of the motor adding washers will space out the mounts

[@Mark-TBH]

I was about to pick up a vintage Huffy version of the Sting Ray for 50 bucks. It was rough but some TLC and elbow grease got it on the road. Then I put a 750W hub motor on the front. It's fun as hell know.

[@refuge33]

There isn't room for that on the front, I call some young kid, making up stuff

[@ericag6600]

Cool!!! Looks really fun to cruise with it and just enjoy the views 👍!

[@perfectweather]

Great video, thanks 👍

[@diceman2004]

Sweet lil ride man .

[@joneserupinsmoke9161]

Nice build yeah I'm going to throw a pair of handlebars like that on my Schwinn legacy

[@RainytheNB]

Glad my solution could be of help! Another cool thing you can do with intake extension is, if you make the metal pipe that attaches to the carb long enough you can actually slide the carb in and out of the heater hose and tune the intake length

[@ChuckHaney]

I used a piece of 45 degree silicone tube for my extension. Turned out pretty nice.

[@KenC56mm]

So cool! it definitely looks like a chill ride. Decent price is always a plus too. It would be cool to swap out the back hub to a machined 4 bearing beefy sucker for reliability And Looks.

[@willpresnell81]

So frickin cool! I'm still shaking off last night's crash and now you've already got me thinking about my next build 🤕🤣🥴🤪

[@dronestuff]

That's not "micro", that's a regulary sized bike, i bet she has a great personality too!

[@novavroomvroom3435]

It would be nice if there was an adapter/ spacer to bring out the 10 tooth sprocket out so the chain won't rub on the rear tire.... Another thing is a sprocket cover with spacers to work with the new position of the sprocket

[@g1ngersnaps149]

I just used lots of washers as spacers, its not ideal but its for sure easier than ordering a spacer online.

[@pumkineater69__]

Bro this bike is wicked i want one now

[@stlmotorizedbikes923]

Another great video. Your build looks like an old 70 's mini bike more than a bicycle. I think it's because the engine looks bigger in the frame vs. A full size adult frame. It looks like a lot of fun to ride and probably is because it weighs next to nothing.

[@nurzrachit7133]

Holy cow man, I was thinking about doing that myself but I didn't think it was possible with the crosstubes. I'll have to look again, but I think the one I was looking at has a 16" front wheel and a spring on the front forks and a 20" back "Slick". I haven't done many builds but I really want to try this one. Watching this is going to be a giant help. I wonder if I could somehow mount a disc in the front.

[@jmrides777]

Nice LA, nice!

[@gta5grindzxb145]

Kenda Kontact 20 by 1.95 is a good tire for just that. I have the 26 in version on my phantom 85 bike. The 26 inch is called Kenda Komfort. Tree fort bikes should have them, I have done a lot of business with them and always been highly satisfied with their company. Plus free shipping.

[@chrisrose5740]

Very Cool

[@MeiGunner]

Turned out good .lol !!

[@barriosbuilds7688]

I really wanna try this!!

[@cwalke32477]

This build would be perfect for my short wife. Been looking forever for a frame that would fit her and a motor

[@ravenpawcraft]

awuah it's such a cutie!

[@josuemelara5085]

XMX rim will fit the one with the pedal brake with the sproket plate adaptor ,came to that idea after weeks of work ,and olso de chain tentioner with the curved adaptor

[@LAHover]

Thanks for the info, I'll have to check them out if these one are not up to the task.

[@josuemelara5085]

@@LAHover BMX RIM.

[@petersymons7817]

Thanks

[@cory4152]

That's pretty sweet ! Any chance you know of anyone putting a chain ring on a 3 speed sturmey archer hub? I am trying to figure it out🤪

[@netx421]

That is cute as can be🍻

[@cheesefries7436]

Now that's cool

[@DJb-ill219]

I'd love to build one....wonder if the 100cc...non YD or BT the one that looks like an 80cc would fit that frame

[@anthonymoralez4571]

Awesome needs some twisted handlebars and forks

[@PapaDutch]

the only bad thing I see is that dangling muffler - I think I would just straight pipe it if there were no shorter and swept under mufflers to put on it * I recently got a 2022 Orange Krate bike, they still make them!

[@fabiannyvm1332]

Hermosura de bicimoto es como para tenerlo colgado.

[@Matthew-wj8cm]

Nice build hover! I finished my spare parts AF80 build on a 80s noname 26 inch mountain bike. That makes it my third build after the Screamin Demon (Zeda triple 40) and Catalina Superior (Phantom 85) I need a suspension fork though. Always something

[@LAHover]

Thanks, and congrats on your builds!

[@randomprecisionmotors3130]

I had the same issue with mine, so I took a torch to the offending pedal shaft, bent it out a tad, re-tempered with water, and it's been fine ever since...

[@randyscott3386]

Some guy from a circus with some monkies called and he wants you to call him back .

[@LAHover]

🥳🤠

[@aristeujunior8908]

Parabéns pelo vídeo faz um vídeo colocando polia e correia dentada

[@reverendgaddy2435]

there is a 24" replica version of this bike out there somewhere. I've been looking for one at a reasonable price for a long time now.

[@ripp3rjak934]

Please tell me how you get the engine to idle and what kind of fuel oil mix you use.

[@yzstormer]

That's awesome! We got the stingray! Also you should mix up gas with castor oil, smells so good!

[@skipstalforce]

That banana bar was never made to support a full grown man, I can't tell you how many kids I saw skewer their leg when it broke.

[@leonardarola]

Gangstah.

[@alpha-alpha-alpha]

You need to incorporate the perpetuum mobile principle for free energy on your bike.

[@EvendimataE]

schwinn please make a 24 or 26 version

[@siklistademakina]

Nice video!! I would love to see a video of you taking this bike on a long trip! By the way i'm currently building a motorized BMX bike though the engine is a rear axle mounted one. Will share it at your Discord server once its finished. Ride safe always!

[@Spodeboy]

Nice compact build! That banana seat is begging for a wheelie. Are you ready for another wheelie? 😁

[@LAHover]

lol, ah good memories...

[@nationaltrails9585]

If only Schwinn would build a 26 inch or plus version as an E-bike or one that could be converted.

[@LAHover]

Take a look at the Huffy Lockland. That bike looks great for gas or electric, a good price, and comfortable.

[@Orbacron]

Hahaha, just needs doordash saddle bags

[@RobertWilliams-ox4hz]

How do you spell the name of that little 49cc engine? You have any other recommendations for 49 cc motors?

[@stephenjohnson6967]

Anybody know good vendors for engine's only? I'm trying to find a Zeda triple 40.

[@KevinTodd]

👍🔧🔧🛠🚲

[@adventureguysimonuk9562]

😃👍

[@groundup3832]

Great build love the color. I would highly recommend changing the exhaust. The stock ones hang to lowe.

[@LAHover]

I have a flex pipe I'm thinking about putting on. Thanks

[@swan0610]

Expansion chamber exhaust + (flex pipe - flange) = best exhaust. They fit together like they were made to mate... maybe too long for stingray but perfect on full size bikes!

[@mikewatson7364]

I bought one too and I'm concerned about just having the coster break. Is there any kind of C breaks for the front

[@LAHover]

Just how fast do you plan on pushing a Stingray? ...but yes, the forks have a mounting point for brakes.

[@haughtyferal3478]

Hey brother , curious whats your most recommended bike frames to use for motorbike?

[@LAHover]

Huffy Lockland

[@Jmateo12]

Hey Bud! Curious, what jet size did you use on the carb? Is that a 66/80cc motor? Thanks

[@LAHover]

Stock 72 jet. It's a 66cc

[@motorizedbikeenthusiast6880]

Its gonna vary a lil bit motor to motor but altitude also plays a big part. Stock jetting is ideal for sea level but if you are higher than sea level you gonna need a smaller jet

[@tmcd6523]

And still not available in Canada...

[@nickpicc4425]

never been this early

[@joezenz7114]

I have a gt7 engine kit from kingsmotorbikes and the carburetor is junk i was wonderingwhat is a decent carburetor that you could recommend

[@joezenz7114]

@Telegram LA_Hoverbike don't know how to but the advice on what carburetor to use would be great

[@LAHover]

That was a scammer pretending to be me... Anyways I'm not familiar with the gt7, but the PZ19, 20, or 22 can work well on most small motors. And they are cheap :)

[@joezenz7114]

@LAHover thanks i ended up getting a 21mm pwk clone still had problems with it running but i watch a lot of video's of your's and found what was going on since day one. Which happened to be a crank seal it's running pretty good now thanks for the video content that you make.

[@dronepilot260rc]

This is as tight of a squeeze as my 4 stroke engine and my Huffy Lockland frame 😌

[@joshcolbert4682]

funny bike

[@Fortuna_716]

I want to put a motor on a bmx cruiser, like a 26"

[@LAHover]

Nice! Good luck, most bmx frames I see are a tight fit.

[@Fortuna_716]

@@LAHover thats why a bigger cruiser frame, like a pk ripper, I'm gonna attempt it, I'll let you know how it goes

[@gcasey38]

Have you ever thought about building a West Coast Chopper motorized bike

[@LAHover]

I'm sticking with practical builds. My roads suck.

[@ChuckHaney]

Nice! I found this video to be a pleasant surprise. Put the original grip on the throttle. Symmetry looks better imo.

[@LAHover]

Thanks, fit is too tight, but I'll be adding a thumb throttle so I can put the stock grip back on :)

[@dxcenataker]

All the places could’ve parked for intro u choose dirty ass puddle in background of beautiful bike lol

[@Orbacron]

Seutek was my second build. I never used the kph gauge it came with

[@Crispified98]

5am upload

[@eaglenebula9080]

As awesome as gas is, this seems like it might be better suited as an electric bike

[@Steveshappylittletrees]

First!

[@gusweiss952]

My next build will definitely be something like this !

[@marygunn2521]

😛

[@larryshaver3568]

i wouldn't put an engine on a bike smaller than a 24"

[@LAHover]

Ride what you enjoy.

[@rexreal8341]

Electric the only way to fly

[@stephenjohnson6967]

Looked so impractical but, I can see how that could be rather comfortable cruising low speeds with added padding to the seat.

[@randomprecisionmotors3130]

The Original Stingrays didn't have a front fender, all the "Crate" bikes did have a smallish, basically useless front fender...

[@LAHover]

Oh, good to know. Maybe this one did not come with them either and I just had a brain fart lol. Thanks

[@wrestlemaniac202]

Too bad these bikes are like $699 these days

[@danajett]

You're too big for that bike

[@wesrey1004]

i bilt one in green made wheelie bars cant keep the frountend down