FISHING MY DIY JUGS | Filling the Cooler with Catfish!

It's time to go fishing with our DIY jug lines with our upgraded jon boat modification! These home made catfish jugs are easy to make and with some fresh bluegill for bait, these jugs are getting tugged!
#fishing #recipe #catfish #catchandcook
WATCH HOW TO BUILD THESE ADJUSTABLE DEPTH JUGS!
studio.youtube...
FISHING RODS, REELS, TACKLE, LINE, LURES, BAITS & GEAR
googansquad.com/ - Use Code LFG at Checkout
MY GO TO OUTDOOR PRODUCTS on AMAZON - www.amazon.com...
SUBSCRIBE - bit.ly/SubLFG
WATCH MORE FISHING - • Latest Uploads | LakeF...
Watch More LakeForkGuy:
Popular Videos: • Popular Videos | LakeF...
Fishing & Outdoor Life Vlog: • Fishing & Outdoor Life...
Bass Fishing Instructional Videos: • Bass Fishing Instructi...
When Wife Goes Fishing: • When Wife Goes Fishing...

[@c_brownoutdoors8330]

Have been absolutely loving these past few videos in the crispy collector and the blackened catfish recipe is amazing

[@mikemiller8440]

That soft shell turtle is way better eating than the catfish for me Thanks again for another awesome video I really enjoyed it and as always I'm really looking forward to seeing the next video

[@nw_champ_2023]

I think your tac might be off on the ignition cycles per revolution. It was reading 2500 at about idle. As far as it “making oil” i had a 30 hp merc 4 stroke, no matter what I did it always made oil. Pretty common issue on smaller 4 strokes from what I understand.

[@robo1210]

Tachometer is working yes however unless I’m missing something I don’t believe it’s reading correctly. Shouldn’t be idling at 22-2300rpms

[@Fun.Guy.Forager]

Sounds like a challenge accepted. Catch clean cook soft shelled turtle soup recipe or little deep fried nuggs.

[@IvIidnight]

Gotta love motorboatin', then droppin' the jugs so you can eat some kitties! 😂

[@finally3984]

Don't worry about taking the motor back off. OSG has you on that, and as a joke, don't disconnect some stuff! That was a classic!!

[@stonedk]

​@maruiacancer6 im gonna show some loooove ❤ hope u Will be out fishing soon Buddy!

[@isaiahellsworth3244]

Went jug fishing a few nights ago caught a 18 a 12 and a few 8+ blues and some channel a total of 20 fish which was are limit for me and my dad here in missouri and for anyone who wants to know i use cutbait

[@Fun.Guy.Forager]

I commented this idea on Flairs video. See if you can beat him to the chase. I have an idea for your next catfish jug line. One definitely need to redo your rigs and make your own noodle lines with a weighted PVC tube for standing your tube up after a bite. Diy your own wire hook setter. Add an air tag or tile GPS to your noodles so you can find and track when it's on the move. It also doubles as a tell when you have a bite. You can even go high class and upgrade the GPS to a ibobber fish finder, temp, depth sonar. Or challenge someone to a DIY jug challenge build and roll up with your high tech noodles you made.

[@zachdiehl3401]

Dude that’s way too complicated I doubt he does that

[@andersonpotter9937]

You need a couple sand bags in the bow to help with the porpoising

[@RogueRipple]

Raise your trim up to bring bow down when you're up on plane. It'll get rid of the hopping.

[@JohnBrunson-ns5ft]

TRIM DOWN BOW DOWN , MOTOR POSITION ON JACKPLATE NOT CAUSING BOW HOP , TRIM MOTOR DOWN IF YOU DONT HAVE POWER TRIM PULL PIN AND MOVE MOTOR TO NEXT HOLE DOWN

[@madtownangler]

You need to go out with Flair sometime and show him how it's done.

[@vosslerhinkel1645]

You don't need to lower your motor. Check your trim angle when trimmed down. You may need to adjust the trim down stop location to trim down more. As long as the fin above the water pick up screen is just below the surface when you are on plane at full speed, the issue should be trim angle and weight placement in the boat.

[@bobbydavis3246]

I agree. Trim engine closer to boat. I had a old Procraft boat that wouldn’t stop porpoising. I actually has to wedge transoms to get foot closer. If all else fails…..those ugly whale tails do help stop the porpoising as well.

[@Charles-pm4nx]

Turtle makes good soup flats makes the best 7 kinds of meat in the Turtle should try if you're able to

[@M.Bassin]

Motor is not broken in yet. It is blow by from the rings. Run it hard and not at wot for more than 5min straight for the next 3-5 hours and she will break in and be a runner

[@golfincroc8473]

This might be to late but you might need more weigh towards the front of the boat specially things like coolers, batteries and stuff you might just have too much weight at the back of the boat. I had a similar problem and shifting some of the constant weight forward helped a lot

[@kentsmith1253]

Eat that soft shell!! Ask Mullet Man. A small electric jack plate is very affordable.

[@throwdown613]

I'm going to take a good guess that Mullet Man knows how to clean a soft shell. Would love to see you two on the water together for a catch clean cook.

[@Ubette-th7kw]

May I suggest taking Emmy on a trip like this? Kids love pulling noodles and don't get bored as easy as casting a line. That's been our experience anyway with the grands.. Fun times and good eating..

[@BJLdownsouth]

Bro I highly suggest trying a catch and cook with soft shell turtle. We eat them a lot here in Louisiana. They are delicious.

[@zlm2032]

I love the jug fishing content. Good stuff!

[@royleeborn6445]

Put that cooler towards the front, and a little weight in the front makes a world of difference .

[@alanwelch6594]

Your fishing trips run the gamut from catch and release to full out meat trip. That's what i like about you, along with your variety of species skills. I never know what you'll be fishing for but i know you'll likely be successful. You would be a great guide.

[@Bman1113]

LFG!!! Love the videos! You should try catfishing with marshmallows!! I know Lojo did it and it was super interesting and entertaining!

[@bigdan254]

I had same problem with fuel in the oil. My problem was the gas tank diaphragm wasn’t working. Wasn’t getting enough air. Try taking it out of the fuel cap but be careful if you don’t keep it covered outside.

[@thomasgoldman7403]

I tried cooking blackened catfish last weekend because of you............holy Santa Claus shit! New favorite way to eat cats. My wife said I can't fry them anymore.

[@Richard.m1192]

Always grab turtles by the rear!

[@jerrylittle8922]

Lower your Mercury until the Cavitation plate in the Foot, is about 1 inch from the bottom of your boat. Unplug your gas line from the Engine at the end of your day and it'll keep pressure from building up. Gas and oil mixed not good.

[@nw_champ_2023]

For removing the motor. Get you a come along. A cheap one from harbor freight will do just fine. Throw a line over a tree limb at the tree house and hook to the life eye under the hood. It’ll lift it right off with ease. Or use an a frame ladder straddled over the top of the motor and lift off with a come along.

[@ryanlittleton1254]

This was such a great video. I've got a little jon boat too and am looking forward to doing some jug line fishing.

[@danlarson5760]

Get a hydrofoil fin. Preferably the stingray. It will stop the porpoissing and increase the turning and hole shot dramatically. I had the same kind if thing you have going on.

[@eddyd.105]

When taking your motor off get a come along and a heavy rope. Throw the rop up and around a solid tree branch and use the come along to hoist the motor up.

[@richardoaks3597]

How about an update on your Silverado and how it’s been holding up over the years?

[@swamper0185]

If you’re getting gas in your oil odds are your gas tank isn’t venting right and as the boat sits in the heat it’s pressuring the fuel system and sending gas into the block. Had this problem before. Hope this helps

[@williamwhite1997]

Ain't you allowed to eat turtles in Texas? Been a good bonus catch and cook if ya ask me.

[@throwdown613]

Lot of work cleaning

[@williamwhite1997]

@@throwdown613 I guess that's relative on what you think is a lot of work, for dinner and KZbin views.

[@ReubenOaks84]

Great jug run, really enjoyed this video as always.

[@toddbrewer7765]

Put a level on the bottom of the boat to the fins on your lower unit level

[@ryancollisson210]

You need to help flair on his jug game hahahaha

[@rrmarlatt]

Dude! You are money with the jugs. You need to manufacture them. Juggs by LFG

[@t-reysoutdoors7324]

Great vid Justin. As far as your motor height, cavitation plate should be set at 1” above the bottom of the hull. Since you added the Jack Plate and you now have set back, it can be higher than 1”. Your porpoising is from too much weight in the back vs not enough in the front, just the way it is on small jon boats. As far as gas in the oil, I agree with 2 earlier comments, they are both correct. Leaving gas tank connected when stored in this heat is pushing gas into the engine till is floods the crank case and its true the rings are not fully broke in with how new it is. Small hp 4-strokes are notorious for making oil. Seeing that softshell had my tastebuds wanting a turtle sauce piquant!

[@wmkess]

The extra offset from the jackplate moves the whole rigs cg back a little too and it also increases the motors ability to lift the bow. I’d agree it would be nice to move weight forward. Typical things would be the trolling battery and fuel but your boats low deck style limits that a lot I bet.

[@shaunroberts9361]

Heck Yeah There LFG. Nicely done. Your are an animal when you comes to fishin...

[@redneck4897]

Them turtles good eatin

[@brandonsamanie1997]

Turtl catch and cook!!!

[@foeshigidi]

Maybe try adding like 50lbs in the front of your boat. I porpoise in my tiller jet when I'm alone and ride real nice with 2 guy on the front.

[@lesliebyrum8934]

Catch and grease oh yes the catfish fries going to be good

[@derekdoodahnickells5376]

Wow you ending the jug fishing with the Blues Brothers🐟🐟😂

[@Lwbwynnone]

Get in touch with Jeff and Hannah Barron on the turtle catch clean and cook.

[@peterrizzuto4248]

Run at wot towards end of break in to seat rings Yamaha outboards have same issue most of the time ppl have trouble with that due to have more time at idle and low rpm’s

[@shaundority7343]

Fuel in the oil could be as easy as changing your spark plugs. If you are getting a misfire it could be forcing fuel pass the rings. Always a good idea to do a spark and compression test first.

[@billsouth9129]

Awesome video. Need to see “OSG in the kitcheeennnnn!!” With some of those cats. Haha

[@addos7965]

Crispy collector videos have been very enjoyable great job LFG ❤❤❤❤

[@dkjphills79]

Lfg apparently soft shell turtles are yummy. Would like to see a catch clean cook and see what you think about how they taste.

[@charliem8458]

Take some binos with you. nockers really help keep track of them

[@sfltrevor]

Heyyy those softies are good eatin too

[@alantrask6500]

The turtle cat combo was a sweet catch

[@timstallons9301]

Soft shell is goood eating man those are perfect size to. KZbin will show you how to clean and cook them. I am a Florida boy and we eat them alot.

[@staceygandy2009]

Get you some Catawba worm tree seedlings. In just 3 to four years you can have 100plus worms each tree. I put mine in quart freezer bags like 20 large ones and fill with flour and freeze them. Bream, catfish, crappie jumps on them when nothing else works.

[@loydmeeks2439]

I had a jon boat that porpoised, and added a whale tail to cavitation plate .

[@shermanwilliams7724]

I caught a blue that weighed 9.2 lbs on one of ur design noodles. Didn't do any damage at all to it.

[@JeRKII]

Big THANK YOU for sharing your work as always. You should've taken the other half of the team with you again... Looking forward to when the littles are big enough to go as well... Lastly time for you to do a colab with Hanna Barron and actually catch a P.B. catfish

[@jameslohman4820]

You need to set up a come a long hoist to take your engine off and on your handy figure it out

[@blainebrocato9068]

Im surprised googan doesn’t have a line of rotomolded coolers yet

[@johnsanders714]

Make sure your cavitation plate is even with the bottom of your boat

[@timcole6381]

You probably won't see this, try moving your camera to the other side so we can see you pulling out of the water 😊

[@CameronDCarter]

Great Video! Just be careful about doxing yourself when the jugs are in frame!

[@doctorlimpygames4692]

So I see you have your Googin pack I recently purchased one I have one thing to say about it I carry a 13.8 pound pack and in my opinion for ultimate pond hoppers. The shoulder straps need more padding and need to be raised to the top of the bag more tilts down into the back too much other than that awesome pack can fit tons of gear.

[@anthonym6160]

LFG you need to give Flair some tips.. you fill a cooler and he strikes out more often than not.. haha.. Great video from our Millennial Bill Dance 😂

[@arkyhunter2750]

The newer epa plastic fuel tanks don't vent, only let air in. Always unhook mine , no more gas in the oil.

[@late0404]

Hey lFG why don’t you try shifting some weight forward in the boat first maybe the battery to the front. Or some gear up front

[@edsmith736]

Try adding weight to the bow of your boat. Have someone sit up there & see how much difference it makes.

[@TheCaptainbeefylog]

You caught more fish in this one session than Flair has all summer! lool

[@johnnypickett3463]

Love when you do the jug video's!!

[@Lethal1160]

Man, I wish I could do jug lines here on public lakes. It seems like a great way to get catfish passively

[@joshwalters4245]

Awesome video thanks LFG!!!🐟🐟🐟🐟

[@chrishargrav7826]

Just trim down if your hopping! Trim up if your dragging!

[@lesliebyrum8934]

It won't be much longer before bow season starts up I hope we can see one of your new bows that you created

[@thatfishingguy11b]

Finally in the water. Crispy collection vids are the best from you unless you collaborate with lunkers

[@robdz22]

Great video, jugging is one of my favorite ways to fish. Sounds crazy, but try hotdogs. That’s all we use in Oklahoma. We fill our cooler every time.

[@deangraham4263]

Turtle soup? I’ve never tried it and would like too. Would be a cool video I

[@jobypeacock4143]

Copied your jug line design and it works great. Caught me some big ole blues on lake Tawakoni. Love your videos especially the ones with your dad.

[@dannydouglas4986]

why is it that you don't have a net in that nice looking boat. you have the room!!

[@harveyhulsejr4292]

Softshell turtle are very tasty fried

[@kendalcobb367]

You might want to put trim tabs on On the hull. It helps alot with the porpoising.

[@nascarmommam5915]

😊 👏🏻👏🏻👏🏻 fun trip. Awesome job. ~ Texas

[@woofersd2383]

Nice catch. Never fished with jugs. Might have to try it.

[@thublit]

Broomstick with a hook be handy.

[@whystop3388]

LFG

[@scrawford8069]

You just needs some fixed trim tabs on the back of the boat, that will stop the bouncing.

[@greenpighunter6930]

Good stuff

[@michaelwalker766]

Hey man… I’m sure people have already told you but you made the chive with your fish guitar

[@harveyhulsejr4292]

Those softshell are really good eating

[@kaceejigs]

Great video as always LFG.

[@jerryf581]

Wearin' 'em out!!! KZbin University can learn you how to clean and cook dem turtles! For handling that motor, get you a 1 ton Harbor Freight foldable shop crane for around $250! Your future back will thank you!

[@troypappas5344]

I'm new to your channel,I really enjoyed it, Lake Fork is definitely on my list.Thanks for sharing man!!

[@jasonlong3929]

Great eating

[@Thebigbuzzlightyear]

Blues are really pretty but damn they're so slimy.

[@joanneganon7157]

Whoo Hoo Double your fun🎉 What a great haul LFG!👍. JO JO IN VT 💞

[@joanneganon7157]

Dearmeat has a recipe from way back👍 JO JO IN VT 💞

[@madmaan12]

Its hard to jug on grapevine, even on the weekdays, without someone stealing your jugs or messing with them in general. If anything, you did really well to get back as many jugs as you did.

[@Richard.m1192]

Grapevine, Lewisville, rayhub, and more, all the local lakes!

[@Rebel1280]

Hey man, my daughter (5 years old) and i love watching you on Saturday mornings, she keeps saying im a girls when you say hello boys lol if you see rhis can you do a quick ahout out little girls too 😂

[@clayrobbirds5361]

they make hand crank jack plates for John boats