Utter disaster in this video when I attempt at fitting the horncast and front mudguard to the lambretta TV175. Support the channel and grab some merch here! teespring.com/en-GB/stores/ki...
Пікірлер: 37
@WarpVisuals4 жыл бұрын
I feel your pain Rob. Glad the RLC item seems to work out!
@davidblagden78944 жыл бұрын
So glad replacement fits 👌 can't understand how people struggle with rubbers, mine just slide on 😀 looking good now though Rob, can't wait to hear it. Cheers for the vid 👍🏼
@tonyrobinson59854 жыл бұрын
Well done Rob, just put some tape on the horncast rubbers to keep them in whilst fitting the horncast , Good luck
@paulrieck76664 жыл бұрын
I always fit the horncasing and the mudguard as one unit. Glue the rubbers in place with patex, screw the mudguard to the horncasing, offer up to legshields and screw the top horncasing screws in first.
@kickbackgarage4 жыл бұрын
I do that on s one and 2 but because the horncast is fekt, I want to bolt the legshield down so I can fire her up and check the jetting and electrics.
@paulrieck76664 жыл бұрын
@@kickbackgarage makes sense. Thanks for the Videos, very helpfull
@Oldenbald654 жыл бұрын
Feeling your pain. A few years ago I smashed a disc brake half. I could have cried 😢
@kickbackgarage4 жыл бұрын
😳
@marcos3ltrv64 жыл бұрын
Using a ratchet strap around the legshields will often pull them in enough to make the holes line up. This should be done with the upper legshield to frame bolts loose. The holes in the leggied are slotted for a reason.
@kickbackgarage4 жыл бұрын
Good tip.
@CarlEves4 жыл бұрын
I shouldn’t laugh but I had to. Especially when the rubber fell off. The simplest things on these machines are sent to try us 😄
@markallen65434 жыл бұрын
You should have used a tiny dab of contact adhesive on the mud guard trim. Beut scoot.
@dord19544 жыл бұрын
Ha those bloody rubber gaskets are a right faff and the holes rarely line up perfect even after you strip it down yourself it’s still a pain to line up 😀
@iancarrington90334 жыл бұрын
I use masking tape to hold rubbers in place, worked well for me. Like all jobs on a Lambretta, allow thee times your estimate of how long it will take .
@TheSteelweasel4 жыл бұрын
Lovely scoot mate 👍
@roymichaeldeanable4 жыл бұрын
Watching you have fun with the mudguard...just thought that...holding it with some string....until everything is in position...might be a plan....I suddenly had a vision of matchstick with string...
@pinkers19754 жыл бұрын
It’s like we are in parallel universes Rob! I snapped the bottom lug off my original horn casting trying to remove a seized screw, then the replacement was an SX fit not an LI (only slightly wider). Glad I bought a Dremel is all I can say.
@kickbackgarage4 жыл бұрын
I'm sorry to hear that. I don't wish that to anyone else! Onwards and upwards!
@pinkers19754 жыл бұрын
Kickback Garage all good, I got it on and it’s not ever coming off!!
@kickbackgarage4 жыл бұрын
Famous last words 🤣
@deezelbum4 жыл бұрын
My least favourite part of a rebuild - the rubbers grow a mind of their own and the horn casting develops a morbid compulsion to fall off and attempt to scratch the mudguard. Decent part from Rimini by the looks of it.
@STEVO-hn5su2 жыл бұрын
Got the same problems right now...My issue is the mudguard rubbers seem a poor fit. They don't quite fit the profile and have little gaps. Maybe I'm just being pedantic...Saying that it seems every single part you buy nowadays seems poorly manufactured and needs altered slightly. I don't remember it being such a pain when I first done this (many years ago though).
@kickbackgarage2 жыл бұрын
I find that the scootopia rubbers fit quite well but nothing fits better than the original used rubbers.
@STEVO-hn5su2 жыл бұрын
@@kickbackgarage Buying parts from India is a bit of a lottery.... Had a rear light problem so I bought a "new" ignition switch. Rear light still didn't work. Spent hours with a multimeter trying to work out what the fuck could possibly be wrong with the wiring.....Turned out the "new" ignition had exactly the same fault as the old one!
@kickbackgarage2 жыл бұрын
Cheap Indian parts, just say no 🤣 some of the genuine sil stuff is good but hard to find these days.
@STEVO-hn5su2 жыл бұрын
@@kickbackgarage It's been a while so I stupidly presumed you could still get decent SIL parts. 2nd hand and refurbed parts passed off as new....It's a lucky dip mate.
@STEVO-hn5su2 жыл бұрын
Legshield rubbers were a pain. Soften them in boiling water then you get 3/4 way round and they're solid again....Soften with a hairdryer for the last 6 inches and you're sorted...Thank fuck.
@wa_siggo96264 жыл бұрын
Where do you buy your component parts for the lambretta?
@kickbackgarage4 жыл бұрын
Rimini Lambretta center, mb scooters, scootopia and chiselspeed are the best places for lambretta.
@wa_siggo96264 жыл бұрын
Kickback Garage thanks💪🏼
@richardshipman83994 жыл бұрын
double sided tape
@benfinlay42404 жыл бұрын
What is the colour code for this please?
@kickbackgarage4 жыл бұрын
Original tv175 s3 colours. New white 8059 Metallic blue 8062 Lechler paint Azzurro metallic 8062 / Asi code LAM A39 Bianco nuovo 8059 / Asi code LAM A36
@benfinlay42404 жыл бұрын
Kickback Garage Thankyou
@mikechrums18672 жыл бұрын
M
@midge2254 жыл бұрын
Is it possible that the one you broke was not the correct horncasting in the first place lol , just a thought rob 👍🛵
@kickbackgarage4 жыл бұрын
There are small differences but the general consensus is that they should fit both non chrome ring and chrome ring series 3's up to the time they changed the horncast badge. So I'm told.