Thanks. I have the WeCreat 20w. New to lasers, but love it so far. I cut and engrave. I did not know about air off for engraving.
@asherdiy4 ай бұрын
You are very good at making videos. The edits. The rhymes. So good dude.
@Peter_Enis4 ай бұрын
The more diodelasers are stacked, the more semi-transparent mirrors the beam has to go through and thus the more scattered the beam gets (polution in the mirrors). So the beam isn't as crisp as with one laser (i.e. lower power)
@charlenechoate174 ай бұрын
I have the 40 and 20. Wanted to put the IR in one to stay most of the time. Which would you put it in? I mainly work with wood. So I assume the 20. Thanks.
@teresayoder552829 күн бұрын
Just ordered my WeCreat 20W today. Will mostly be using it for engraving. I want to make custom labels engraved on leather. Looking forward to using my new machine!
@lisahay55142 ай бұрын
Looking to start cutting and engraving cowhide, metal tumblers, and glass cups. Also my machine will be in in uninsulated metal shop where we do get a high of 15 degrees Fahrenheit during the winter. Given these specs can you recommend a machine under $2500?
@chitowntexan3 ай бұрын
Great breakdown. Thank you 😊
@bethminnier51092 ай бұрын
I want to cut wood for signs but I also want to do tumblers. 40w?
@GeekRedux4 ай бұрын
Chart link?
@amandamullins86363 ай бұрын
Where does it say on an engraver how large of a piece it can engrave? if I want one that can do something say 30 inches wide?
@danthemakerman4 ай бұрын
Good information and nice work on the rhyming portion I'm sure that took awhile to put together.
@Hugocraft4 ай бұрын
passthrough is important for larger cuts
@starblazer134 ай бұрын
Lie #6 - Links to the table of laser capabilities will be posted in the description below
@makeorbreakshop3 ай бұрын
ha updated now, sorry!
@Photonsnmotion3 ай бұрын
It's not the total watts, but pulse width, pulse rate, M2 value to maximize your total energy at the focus. So if 40 watt has 100 um spot and the 20 watt has 40 um spot. The 20 watt is going to crush the 40 watt. Also anything over 0.5 watts is a class 4 laser.
@thewarpsyrhead4 ай бұрын
Not really a lie if no one tells you…
@makeorbreakshop4 ай бұрын
Lie/Misconception maybe.
@fookingsog4 ай бұрын
Lie of Omission!!! 😂
@Peter_Enis4 ай бұрын
@@makeorbreakshop I've looked at a lot of video's of your great channel. But I can't remember......is there a diode-laser that can switch between red-laser and ir-laser. Freedom to engrave on metal and wood?
@makeorbreakshop4 ай бұрын
@Peter_Enis yep, check out the xTool F1
@makeorbreakshop3 ай бұрын
@Peter_Enis yep, xTool f1, f1 ultra and Laserpecker
@lastlight053 ай бұрын
I mostly cut with my 40w Vision
@MakerDaddy3 ай бұрын
Good content!
@loriedavis94102 ай бұрын
Score, engrave and cut. Looking for a laser that can cut 1” pine.
@brianfoster7064Ай бұрын
If you're getting charred edges, you're using too much power and/or too slow off speed.
@BeardedBuildsCo4 ай бұрын
So you said 6000 meters per second…. I’m guessing that is one of the lies? 😅
@makeorbreakshop4 ай бұрын
Ha Dangit, 600 mm/s
@BeardedBuildsCo4 ай бұрын
@@makeorbreakshop I knew what you meant 😁
@paulvincentatasan74513 ай бұрын
How I wish I have that kind of laser for business 😔
@greg43673 ай бұрын
Listened to the whole video. Exactly which lies are the BIGGEST lies?
@makeorbreakshop3 ай бұрын
That lie that one is the biggest ;)
@aaronblackford9814 ай бұрын
Love
@amandamullins86363 ай бұрын
the rhyming is too hard to understand
@greenbuttonpusher_hc64534 ай бұрын
lol.... just wondering how these companies still makes $€ after sending those to all these influencer's ???? want to believe....think i skip : D
@OnePotMeals3 ай бұрын
How about skipping the poetry in the future
@menglor4 ай бұрын
If I wanted a music video I would watch one. Technical video should informative.