Laser Cut Foil | Laserable Foil | Trotec Foil Rolls

This week, we're launching our new Trotec Foil Rolls, which are a laser friendly foil that you can stick and cut on any practically any hard flat surface.
Laser Foil Roll is a permanent bond PVC free foil that allows decals
and stencils to come to life by adding colour and flare to your projects. This foil offers a permanent bond, is excellent for decorative applications and is an excellent border tape.
In honour of the launch, we wanted to celebrate Movember with fun laser cut grooming applications like a mustache comb, pomade jars, and a grooming kit box.
**MATERIAL SETTINGS**
The foil works with a kiss cut method which is a very light and quick cut. For this project we've used 15 power, 2 speed on a Speedy 360 80w laser.
If you would like to purchase Trotec Foil Rolls please click here:
www.engraving-...
If you would like to donate to men's health for Movember please visit: ca.movember.com/
------------------------------------------------------------------------------------------
To get a quote on our laser engraving and cutting machines, please contact us below:
Phone: [phone]
Email: [e-mail]
Follow us on social media:
Facebook: goo.gl/UfHnEa
Twitter: goo.gl/GEgTwQ
Instagram: goo.gl/gJN5b4
LinkedIn: goo.gl/oBL6V4
-- Trotec Canada locations --
| Vancouver | 20381 62 Ave #705, Langley, BC V3A 5E6
| Calgary | 820 28 St NE #2, Calgary, AB T2A 6K1
| Toronto | 1705 Argentia Rd #9, Mississauga, ON L5N 3A9
| Montreal | 8096 Trans Canada Route, Saint-Laurent, QC H4S 1M5

[@artcut5877]

Super idea bro

[@lily.3560]

Can this be used with other laser machines?

[@hillaryjagos8002]

Please tell me what settings you are using

[@smalltownbigfamily4942]

Can this be used in any laser machine

[@jamesmarkpriestley]

Can you ship to the U.K.? Trotec U.K. don’t seem to stock this!

[@emiliehaugen7168]

I like your edit

[@TrotecLaserCanada]

Thanks! ;)

[@rickymeadows5176]

I am a bit new to laser etching , can you use this technique on etching lettering on silicone materiels , like silicone watch bands ?

[@dianehenderson630]

love this!

[@TrotecLaserCanada]

Thanks Diane!

[@ItsyaboyEd]

Will the foil be fine on cardboard boxes. Specifically the outside of magnetic gift boxes

[@karllaun2427]

Interesting in learning more, but why do I have to create an account just to check prices?

[@alvint4944]

Hi! Thanks for the demo! Just curious, when we say kiss cutting, this is just setting to low power and faster speed?

[@northdoorsmen7545]

COOL!!!

[@TrotecLaserCanada]

Thanks Isaiah!

[@northdoorsmen7545]

Is this available on your website?

[@Stevieboy7]

So this is essentially like a vinyl right? There is nothing but the tackyness of the glue holding it down?

[@TrotecLaserCanada]

Yep exactly, it's extremely thin the feel is like your regular tin foil but has a sticky glue to hold it down.

[@soypuntotrazo3974]

Hi, the laserable foil have the adhesive include? or you used another thing to stick in the acrylic? thanks!

[@irissalas6839]

What paper is it? Can it be used with any laser machine, Glowforge or LaserPecker?

[@NicoleYeung-tq8om]

HD video 🤩

[@warlockd]

Do you have any in ferrous material? I want to make custom magnet shapes using a thin foil.

[@imprueimprue7633]

Wow! something to try on Monday. What are the settings require for these foils?

[@TrotecLaserCanada]

Thanks! Well do a kiss cut, we did 15 power, 2 speed on a Speedy 360 80w laser.

[@RonKillian]

Looks great, but with no details, this is just an ad. Laser power, settings, ect. Nothing helpful here. You tell people to ask questions, but you don't answer the questions.

[@philmckay9973]

should u press the foil down onto the substrate so no bubbles?

[@TrotecLaserCanada]

Yep we would suggest a roller or a squeegee

[@PantheraPress]

You say it is a permanent bond - but then you peel it right off with ease? Is there a missing step to make sure the foil is really bonded to the surface?

[@TrotecLaserCanada]

Hi there, that's a good point, when the laser etches the kiss-cut it bonds the inner foil onto the surface where the outer layer can be peeled easily. We hope that helps.

[@rospa73]

avete un rivenditore di questo foil in italia grazie

[@neilgrieve6629]

The end results of this method do not have a very precise edge finish in the video compared to die cut or plotter machine cut transfers

[@nonsquid]

If only you could use this for electronic circuit PCB boards. Maybe if you used conductive glue instead of solder. Tape layers would allow for multi layer circuits. If the foil was multi layers deep, higher current could be utilized. If you made an antenna array out of nickel foil, you could make a passive radar chaff reflectors.

[@TrotecLaserCanada]

You can make PCB boards with our Fiber Laser: kzbin.info/www/bejne/rpmze5ufgpKDsLs

[@SivanAmedi]

Hi! Is it can works with the GlowForge?

[@TrotecLaserCanada]

Hi Silvan, we're not sure and unfortunately cannot comment on another laser's capabilities.

[@Unlimited0pti0ns1]

Hello i have a question please, laser foil can be used with fiber laser machine or just with CO2 machine? Thank you.

[@TrotecLaserCanada]

kacso cosmin Hi there, just CO2

[@destroyingangel9838]

I hope that foil is cheap, it seems you waste a lot doing text etc. Other than that it looks like a good product for adding extra value and detail to projects.

[@johnkraemer5505]

Wow! Very interesting! Will you foil rolls work with any laser (in particular, a Thunder Laser)? Thanks!

[@TrotecLaserCanada]

Hi John, yes this foil should work with any CO2 laser, but we can't speak on any other specific brands.

[@johnkraemer5505]

Ok, great! Thank you for the feedback! I'm looking forward to trying out the foil very soon!

[@TrotecLaserCanada]

John Kraemer thanks John we hope you like it!

[@joemanta504]

Will this this work with one of those cheap mini table top wood laser engraver's.

[@TrotecLaserCanada]

Hi Joe, we've never tried but in theory yes.

[@rickmccaskill7888]

What power of laser can I use this process?

[@TrotecLaserCanada]

Hi Rick, you don't need a lot of power to cut foil - even 30watts would do.

[@nodomakerlabprint4776]

No se me hace una alternativa, teniendo en cuenta que esto lo puedes lograr con un plotter de corte y vinyl oro espejo

[@TrotecLaserCanada]

Yes that is true, but with a laser you can do so much more than what you can do with a vinyl cutter. This is just an additional application for the laser.

[@mylenebonin7732]

Is it possible to have the dieline file?

[@TrotecLaserCanada]

Hi Mylene, please email us at [e-mail] for artwork.

[@philmckay9973]

interior use only or exterior as well?

[@TrotecLaserCanada]

Hi Phil exterior use as well

[@xxxxin1]

is it available in the UK? Trotec UK doesn't seem to stock it.

[@TrotecLaserCanada]

Hi Josh, if Trotec UK says they don't stock it then unfortunately there is no option to ship from Canada.

[@lizsierra3446]

Can you add a link for folks purchasing in the US? I tried to purchase but it will only allow a Canadian address.

[@TrotecLaserCanada]

Hi Liz, this product might not be available in the US. We suggest to call your local Trotec office and double check

[@rafikkhankhan1448]

Sar laser cutting machine kahan milegi please answer

[@TrotecLaserCanada]

Hello Khan, what was your question?

[@monkeymaster6489]

Hi, is the foil removable if I'd like to do another design?

[@TrotecLaserCanada]

The background is removable but anything that's lasered will show on the inner foil design.

[@monkeymaster6489]

@@TrotecLaserCanada ok gotcha. Will this ever be available for US customers?

[@TrotecLaserCanada]

@@monkeymaster6489 The foil itself? Not sure to be honest you would have to check with Trotec USA for it.

[@straywelshone]

Looking for supply in the UK . We are so slow at everything in this country

[@the_real_hislordship]

Are the laminates and foils from Trotec recyclable? Throwing away that amount of scrap foil isn't good at all for the environment.

[@OnlyMemorableGifts]

Which materials use for comb

[@TrotecLaserCanada]

TroGlass Black Satin Acrylic and the Trotec Gold Foil Roll, you can see where we got it in the description of the video.

[@labelq8389]

Price for whole sale please.and what size of laser lens your using.

[@TrotecLaserCanada]

Hi Salah, we cannot give pricing over the internet. What is your email and country of residence?

[@labelq8389]

iam in Kuwait I have company made label . u can visit our Instagram q8.label .my email [e-mail]

[@TrotecLaserCanada]

Salah Alden hi Salah, we apologize for the late reply as we were on holidays. We will forward your request to our partners on Kuwait

[@labelq8389]

@@TrotecLaserCanada ok . thanks . can u tell me who is ur partner here in kuwait please

[@TrotecLaserCanada]

@@labelq8389 Our partners are: Fitco Systems Omar Ben al Khattab Street 13030 Kuwait KUWAIT Tel: [phone] Fax: [phone] E-Mail: [e-mail]; [e-mail]

[@vkjnrokis]

Would you ship to Lithuania?

[@TrotecLaserCanada]

chakis v yes of course, please provide your email and we will forward to our partners in Lithuania

[@johnbloor4376]

Would this work using a 50w blue laser?

[@TrotecLaserCanada]

John Bloor hi John we dont know, we can only speak to our CO2 and Fiber lasers.

[@monroesigns7922]

If you mean a Blue and White Chinese laser, then see the answer above to John Kraemer's question.

[@imprueimprue7633]

Great! What are the setting you are using for foil engraving. Gold And Silver foil has different size of thickness, and in 360 machine what do you choose in job control.

[@TrotecLaserCanada]

Thanks! Material setting are in the description. The thicknesses should be the same size

[@m.yasargulseven2446]

100milyonluk Türk dünyasını neden dikkate almıyorsunuz

[@josephmchugh9866]

So dumb. Went to the website to check out your products. Can't see prices unless you create an account. Can't create an account unless you live in Canada. Moving on.

[@TrotecLaserCanada]

Hello Joseph, sorry about the confusion. I have included a link below to our website and it will give you the option to choose where you are from. www.trotec-materials.com/

[@josephmchugh9866]

@@TrotecLaserCanada Tried again on the US version of the website. Looking for laser foil like in your video. Doesn't look like you sell it on the US site.

[@mathb5053]

Do you think it could work with a 10 watts diode laser (orthur master 3)?

[@carolwierzbicki6097]

what setting are you using Paper ? what substrate am I setting it up in I am doing it on a glass but glass will not cut so what do we use ??????? This is important info you completely missed

[@TrotecLaserCanada]

Carol Wierzbicki hi Carol lets dial back the aggressiveness. The settings are in the video description. As you can see by the video we never do a full-cut on the foil, its always a kiss cut. Also, you should not cut glass with a laser, it can shard and crack. As in the video we have used the foil with wood, plastic and acrylic - place the foil on an object, do a kiss-cut, then peel off the extra foil that you are not using.

[@V-Art.studio]

When a laser burns the film, sulfuric acid vapor is released, which will lead to equipment corrosion.

[@TrotecLaserCanada]

Yes when you use PVC. As mentioned in the video, this material is ***NOT*** PVC-based, none of our Trotec materials are PVC based. This material *IS* laser-safe. Thanks

[@V-Art.studio]

@@TrotecLaserCanada Thank you understood

[@TrotecLaserCanada]

Thanks Vadim! @@V-Art.studio

[@mailtojarriya]

You don’t sell to USA?

[@TrotecLaserCanada]

Unfortunately we do not. Our apologies.