myDMX buddy | ADJ mydmx 2.0 | dmx lighting software | replace DMX chip inside myDMX

if you mydmx is not working | mydmx buddy | mydmx 2.0 | dmx lighting software | replace DMX chip inside myDMX
Advertise and Video Spencers can hire me on my bands Famebit: fbit.co/u/FansofJimmyCentury
jetsetsound.com/
American DJ ADJ MyDMX Buddy for for payments of $25 in credit needed no interest at Zounds: www.zzounds.com/a--3858955/ite...
MyDMX Buddy no DMX output Repair Fix the DMX chip inside the unit, to use with mydmx 2.0
ADJ MyDMX Buddy Software Lighting Controller
ANALOG DEVICES ADM485JNZ Driver Line, RS485 Transceiver, 4.75V-5.25V in, DIP-8
Replacment DMX Chip: www.newark.com/webapp/wcs/stor...
Extend the range of your DMX control by adding the American DJ myDMX Buddy to your setup. This DMX-to-USB controller works with myDMX 2.0 software.
ADJ MyDMX Buddy Software Control
myDMX Buddy is a scaled down, entry level version of American DJ myDMX 2.0. Out of the package, myDMX software will run in limited mode (No 3D visualizer, Easy Remote or Midi features). However, these features plus other upgrades can be purchased at www.dmxsoft.com. The dongle plugs directly into a 3-pin DMX input on your lighting fixture or can be connected to a standard, 3-pin DMX cable to extend your data run. The dongle connects to a computer via a USB connection.
Features:
- For use with any DMX512 compatible fixture
- Easy Setup, Programming and Playback
- Upgrades available at dmxsoft.com
- Fixture Library Includes over 10,000 Fixture profiles from over 500 Manufactures
- Compatible with myDMX 2.0 software
- 256 DMX Channels
- Software based, Control System
- Compatible with PC & Mac (OSx 10.7 and higher)
- 32 & 64-bit (XP, Vista, 7 & 8)
- Dimensions (LxW): 3 x 1"/ 75 x 18mm
Weight, Dimensions, and Manufacturer Part Numbers
Shipping Weight: 0.25 lbs
Shipping Dimensions: 9 x 4 x 2 in
Manufacturer Part Number (MPN): MYD858

[@Djhyper66]

Great video !!

[@Lasvegasvideoproductionservice]

Thank you! @Djhyper66

[@joebentry]

PLEASE CLARIFY - As for “pulling” the insides “out” - from WHICH end of the Barrel does slide out? The A3F end? (which appears to be easy to grab ) but a long way for the “stand alone button” to travel? Or the Micro USB end? (which looks a tad fragile) Thanks in advance Joe

[@SteveAldous]

Thanks

[@Lasvegasvideoproductionservice]

You're welcome! Thanks for watching!

[@BobCates]

Man I wish I saw this before I disassembled it myself...since I didn't take the end cap off first, I could not push the stand alone button down far enough, which meant I broke the stand alone button pulling the inner casing out. grrr.

[@Lasvegasvideoproductionservice]

Hi Bob, Google "Hosa 5-pin DMX Terminator" there like $5-$10

[@malditoklee]

I just bought one of these, what was the "Ender" you were referring to that would have protected the dmx interface so this doesn't happen? Thanks!

[@Ficorum]

Its called a terminator, if you google it you'll find how to make one.

[@therealdja]

Can you please add a new link to buy this chip I see there are many version it seems of this same Maxim MAX485 Chip. Does the EPA 1327 have any effect on the my dmx buddy because I can find several chips with different numbers I am not sure if those are batches or versions or what? Thank you

[@XxChrisWestxX]

I have 2chauvet lights and a 2 led bar light for lighting is it possible to connect all 4?

[@djwolftang4713]

Yes

[@djjeronline]

what chip is this and where can I purchase?

[@Lasvegasvideoproductionservice]

sorry for the late reply, the link is in the description.

[@amthedjlaro]

Can a 2.0. work with a 2.1 ? Program by chance

[@Lasvegasvideoproductionservice]

I don't know any more sorry I stopped using software and got a DMX board to us with Ableton.