Dent Pulling SHORTCUTS! | The Easy Quick Way!

[@winthein4337]

Hi Dent discount, When could i have training with you? Could you provide your contact number? Thank you. I am your one of subscribers and i watch your PDR very often...

[@DentDiscountPDRBodyShop]

PDR training Send me a message through this site. www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/

[@TheRickjames215]

I get mocked in the body shop for using your techniques, but my boss can't argue with the results. Consistently surprised with the panels I've been able to save. Thanks for the tips.

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ Thank you for your comment James

[@thetruthserum2816]

You are witnessing the cutting edge of dent repair. Ken is likely in top 5 in the world for quality PDR techs... Remember, all pioneers are mocked throughout history... "The Earth is Round", "Earth is not the Center of the Universe" "Humans can't fly", etc. If you knew that hot glue, pry bars, heat gun, pull tower, pull tabs, and alcohol would work better than weld tabs, grinder, bondo, dry, sand, prime, dry, color match paint, dry, clear,dry, polish. I think it would be something for your colleagues to embrace, and not mock... Maybe boss man should send the team to some PDR classes! Ken offers them :-) Paint techs probably hate it... lol (We don't get anymore work)

[@TheRickjames215]

@@Carbon_Fiber Shops make money to use materials. They get paid to replace parts. They don't want me to be able to straiten a fender when they are paid to get a new one.

[@TheRickjames215]

@@Carbon_Fiber It's not entirely up to the shop. When insurance is involved. In some cases. Sure you could do that. However most of ny work is insurance jobs. And they dictate pretty much everything.

[@VanishingNomad]

@@Carbon_Fiber , Because these techniques are so new, that most dont know about them. When we see the PDR guys come to the shop, they generally cant fix anything bigger than a golfball. We wont even call them if the paint is broken at all, because we have to repaint anyway. In which case our methods arent that much different. Also, no one knows that a piece of "Plastic" stuck to the side of a car with something as ridiculous as "Hot melt glue", of all things, has enough gripping strength to make a pull like this and hold. If that was well known, we would all be doing it. In the example in this video, a conventional shop will weld a metal plate to each side of the bodyline, and make their pulls off of that. We also have "wiggle wire" which was a huge advancement over when I was young, but its still welding some form of attaching point to the body so you have something to grab on to and pull off of. Keep in mind, the WAY he does his pulls in the video, walks the dent out, and taps down the crowns is nearly identical to how a good metal worker does it anyway. That hasnt changed. The differences are this: 1. Hes using glue tabs for his attachment points to make his pulls. The pulls themselves are identical, however. 2. He uses a "Hammer & Chisel" technique when taking the stress out of the crowns and doing his tap downs. I dont know why this is done this way. A polished bodyhammer should do the same thing without breaking the paint. Back in the day we also used polished "Chasing" hammers (only available from Mercedes Benz Germany, back then) and smaller jeweler's hammers for the fine work. The tap downs could also easily be done with a nylon jewler's hammer (which may actually be my own personal trick because I have never seen anyone but me do it). 3. Once the metal was really close we would use a metal file to highlight the highs and lows to continue tuning in the final 10% of the repair. Today, the PDR lights accomplish the same thing, so this step is replaced with using the light and the 'shine' of the paint itself, as the final guide. If I had to guess, Rick was an old school metal finisher, before getting into PDR. PDR on its own, does not have this type of skill and technique in it. Its something that evolved separately from conventional bodywork...probably from massaging out minor flaws that happen on the assembly line during new car manufacturing (which is why you could ONLY get the tools from Mercedes Benz IF you were a certified Mercedes shop, back in the old days). It would require a real metal worker, who knows old school metal finishing, to take it to this level.

[@MasterJediSean]

As a new viewer I can honestly say this type of repair is far superior to traditional Auto body work. This keeps the vehicle in an original state. Great work! This will become the standard in basic auto body work.

[@travisflesher2867]

I’ve worked in the industry as a technician for over 20 years, and I’ve never seen anyone work a dent like you. You are a true artist! Amazing work!

[@DentDiscountPDRBodyShop]

Travis thank you so much for your comment I really appreciate it

[@deejay4837]

And you'll probably never see one again like him. Literally, there's no one in my huge city that does this. Only pathetic little hail and door dings.

[@MegaMagaTrumpsavingAmerica]

Yep you’re fired!

[@consciouscool]

This is artistry, or sorcery. When I owned part of a body shop 15 years ago, the pdr guy was our secret weapon, the industry was so new to us. Either way this is an industry disrupter. Saves time materials and the environment and the result speaks for itself, what's not to love.

[@DentDiscountPDRBodyShop]

Thank you very much for your comment I appreciate it

[@BlueCivid]

If there’s one thing I’m enjoying about your videos, it’s gotta be the quality! Very informative, entertaining, and clear explanations

[@DentDiscountPDRBodyShop]

Oscar thank you for your comment

[@EmmanuelNyuykongi-f6e]

it feel good meeting you guys is amazing is really give me a lot of aprofmeiny

[@jackpalczynski7884]

You make it look easy. But you have the knowledge to know what to do. I've tried a bit and learned I don't have the patience, tools or knowledge to do the same. Much respect to you.

[@4evermacn]

Your metalwork is amazing, Ken. I was trained by Natalio Balderama in 1993 and worked alongside some of the best PDR techs in the industry. It always makes me wonder when you repair the dent that I would consider to be backward. Your end result is amazing nonetheless, I always repair the deepest part of the dent first. Funny how many schools of thought there are in the industry. Great channel and ground breaking technology.

[@Dustinicus.]

It makes sense to repair the edges first. Start with the last part to bend in an accident and work your way to the first part

[@AC7812]

New to the channel and in the collision industry for 25 years and you sir are an artist.

[@dentremover01]

WOW amazing repair! I finally got to watch the full video! Getting the area below the 1/4 panel where the bumper bracket sits is really crucial... You made that look easy !

[@DentDiscountPDRBodyShop]

Martin right on my friend thank you for checking out my video. I really appreciate your comment as well.

[@VanishingNomad]

This is the future of body and fender work.

[@tim76239]

New subscriber....I started looking into pdr because of my teen age daughter dinging her car ...and the used car I just bought with some dents. I use to think of pdr as a way to fix hail dings only. Your work amazes me....now I want to start learning how...maybe start a business......I own 7 used 1990s and early 2000s cars so before I ever set up a business I have plenty to practice on.

[@DentDiscountPDRBodyShop]

Welcome to my channel thank you for subscribingsecretpdrpaintlessdentrepairtrainingonline.com/ I appreciate your comment

[@thetruthserum2816]

the catharsis of making dents disappear is worth it. Take photos, otherwise, no one will believe you that there was a dent there before...

[@velox_vx]

New subscriber here I’ve been doing body work for a year now and I’ve been telling my bosses to invest in flue pulling but they never listen. This is definitely the future love watching the vids

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ Thank you for your comment . It’s really hard to teach my dog new tricks. Every shop has their way of working on cars and running their business Their making money so it’s hard to make a change Hopefully my voice text makes sense

[@graemefyffe5295]

Im an old school Panel beater in New Zealand. Served my apprenticeship in the early seventies.We made panels by hand etc..Im very impressed by the way you work and the skill you have...All the very best...Graeme Fyffe,Warrington,Otago,NZ

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ Thank you for your comment

[@VanishingNomad]

I have a similar history. Grew up metal finishing European High Line cars back in the 1980's I did a formal 3 year apprenticeship with one shop, under this angry German who swore at me a lot, and finished at a shop owned by a friend of his for all the heavy collision stuff (frame work, changing quarter panels etc...) So I too am seriously impressed with this entire channel.

[@souhailla10]

i prefer to call you a "metalist" instead of a mentalist ;-) you're the best sir !!!

[@DentDiscountPDRBodyShop]

I will take that!! Thank you Roberto for your comment

[@bg8807]

New subscriber. Your amazing and I want to learn PDR. Someone backed into my left bumper looks pretty bad but I want to attack it with your knowledge. Ordered my first PDR yesterday. I appreciate your work.

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ Thank you for your comment

[@victormaholik594]

I work at a dealership and we see shotty work all the time. That looks awesome!

[@AlfredoHernandez-fh5fk]

Master master you did it again brilliant job saving money for one on one classes I’m a 15year bodymen hope one day i can be as good as you master brilliant job 👍👍👍🤙👍

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ Thank you for your comment Alfredo. I’m looking forward to meeting you I’m sure we can learn from each other.

[@michaelbattle7477]

MAN OF STEEL! I just completed of job of pulling a dent out of the rear quarter panel. Thank you for you channel, you knowledge and the way you work that steel! I have pictures to show off, but I am sure you get plenty of this. I will continue to watch because there is finishing work to do! THANK YOU!

[@b3hamby]

I am a new member just subscribed today. just got into this type of repair. I started with a $15 kit from Harbor freight and upgraded to a kit from Eastwood.. I found your youtube channel. While I was looking for videos to help me learn how to use my kit. I’m doing pretty good with it but I see from your videos that I’m not even scratching the surface of what this trade is all about. Thank you for your channel and for putting these videos out here.

[@aleksandaralobic171]

Work of art, amazing, so much better than torchering relatively thin metal with grinding, welding, hard hitting.

[@davidpayment8046]

I am first time subscriber to your channel. I love that you are teach teaching old school dent pulling. I did dent pulling back in the 70’s and miss the pulling. Thank you

[@DentDiscountPDRBodyShop]

David welcome to my channel thank you for subscribing

[@gordy1961]

You are totally awesome at this job, I doubt any of us will ever reach your level of expertise, that's why I subscribed the other day, don't want to miss any of this stuff... A couple of comments though, I was always taught never to hit a hardened hammer against another hardened hammer, if a piece flies off and gets you in the eye, you are done... of course you could be using a copper or softer hammer, can't tell from the vid. Also I never see any PDR tech show what is going on with the bar on the back side of the panel so we can see how you work the dent, only ever seem to see the painted side, it would be nice to see how you work the bar on the inside panel when you get the time for another vid.... top work bud, Amazing.

[@paulywalnut3364]

Going from repairing 50 cars a week, to 5 cars sounds like a dream! Maybe when I retire I will go this this route... Stellar work!!

[@DentDiscountPDRBodyShop]

Pauly thank you for your comment I’m never going to retire working keeps me young

[@Ar.maverick]

I am new subscriber to this channel, I find it amazing to watch a real Mechanic at work.

[@DentDiscountPDRBodyShop]

Welcome to my channel thank you for subscribing

[@jameshyde1501]

WOW!! HOW BRILLIANT! OMG! This guy is another Master Artist!

[@inawrocki207]

You dent repair guys are artists. This is always mind blowing to watch.

[@DentDiscountPDRBodyShop]

Thank you

[@michaelbattle7477]

I are one talented mother flower ! I have got a dent and you have given me inspiration! I will be watching and subscribing!

[@highclassinborrowedshoes]

New subscriber! I am a 39 yr old female, just started Auto Collision class to earn my Associate's degree in Applied Science.... My school is supposed to be "state of the art" but we use the old methods! Seeing how u do it, the old methods don't make sense

[@Chuchurone]

I just finished my pdr course ,and I love to watching your videos

[@warren556]

New subscriber. I've been painting for 16 years now but PDR has always amazed me. Your work is like nothing I've ever seen. Even more interested now.

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ One on one training send me an email on this link

[@DentDiscountPDRBodyShop]

Thank you for subscribing welcome to my channel

[@fervar9466]

Hi, my name is Fernando New subscriber... I have been in the auto body industry all my life. I started back home in South America and learned how to restore cars, we made panels from a sheet of steel. We use to say (give me a key and I can make a car around it). Moved to the USA in 1987 and have been working on the collision side of the industry in several Dealerships since. I did some training for PDR back in 2002 but did not practice enough a the time. From 2002 till 2021, I have worked as an Estimator and then Managed a shop at the Dealership. Last year, I moved to South West Florida , and now I am back beating panels working as a technician in a Dealership. I am very impressed with not only your talent but with the extreme pulling you can accomplish with the hot glue pulling technique. it's really amazing to see the hard hits you pull out on your videos. I am going to try your technique and keep watching your videos to learn more tricks. Thanks for sharing.

[@DentDiscountPDRBodyShop]

Fernando Welcome thank you for subscribing to my channel. You have an incredible story to tell. Thank you so much for sharing on my channel

[@jesseplascencia4114]

You are a bad ass at it. That’s what I call working smarter.

[@martycaldwell7197]

I've been watching your methods for a while now ,and I have learned a whole lot. I've been using the glue for a while now and it's funny you don't even have to tie these cars down to do what you're doing. every once in a while I have to tie a car down but your channel has helped me a lot and I've been doing this for 40 years. and with the electric cars coming out you're not going to be able to weld anymore you're going to have to glue.

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@johnphillips1345]

I have been watching your channel for awhile simply Amazon... I can never get my glue to stick that well. You the man.

[@DentDiscountPDRBodyShop]

John thank you for your comment you have to remove the moisture and clean the panel really well

[@MrSzopenspn]

great job my master!!! I love your movies, I learn a lot from them and tweak your methods to see you in a short I hope. Piotr from Poland

[@DentDiscountPDRBodyShop]

Thank you so much for your kind words I really appreciate your comment

[@larrymarshall3744]

Your still the greatest man, I am retired mechanic and thinking strongly about coming out and get some training and come back home and open shop again

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ Thank you for your comment Larry

[@bt19778]

1st time watching , have to watch those electric poles and mailbox posts. Wife had a mailbox post take out the sliding door handle. Now if I can fix it. Factory installed panels are always

[@rogergroover4971]

First time watching you. Very cool and I really appreciate that your not very wordy but still explain everything! I enjoyed your video. Thanks for the education on dent removal techniques.

[@bt6770]

By far the best I have ever seen. Awesome work

[@khalid109q]

Amazing. Really, you are the man who control the steel. Well done.

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@draganjovanovic7698]

I am delighted by yuor PDR work! I am a new starter in this job and I need more expeirians. Thank you!

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@JW-lo2bh]

This is my first time watching one of your videos. Absolutely fascinating!!

[@gregoryfarleyjr6732]

First time watcher!! Amazing work. I recently had someone hit my quarter panel on my 2005 CRV but I don’t think I will be able to not get out of painting it unfortunately but I think I will give some of your advice and tricks will save me some time at least.

[@dentevo2259]

“I am enjoying these short cuts!” You da man Ken! Thanks as always for sharing your awesome techniques in such a well presented way!✊

[@DentDiscountPDRBodyShop]

Dent Evo I really appreciate your support thank you so much for your comments I really appreciate you

[@toolmasterdave51]

New subscriber here. Loving the way you're able to flatten out these panels. My car has a dent that I took to 2 pdr guys in puyallup and tacoma Washington. They both said it was too big. I've watched your videos, and you fix stuff that is way worse than my car!! I'd like to bring my car to your shop.

[@Auckie85]

I’m new here but I am using what I learn here on my project cars. Just wanted to say I appreciate your content.

[@DentDiscountPDRBodyShop]

Welcome to my channel thank you for subscribing

[@n.elliott9122]

New subscriber..remember the metal always wants to return to it's 'home' position of origin.. awesome work brother!

[@The_mexi_can]

New Subscriber! Im a building contractor who loves body work as a hobby on my own vehicles! learning and slowly collecting tools. thanks for your content and wisdom!

[@DentDiscountPDRBodyShop]

Marcos welcome to my channel thank you for subscribing I like ripping down walls in my house and putting up crown and columns for fun

[@RealRickCox]

Nice work. I was trying to see what my options were to fix up a gas tank for my motorcycle... mainly fixing dents. I guess KZbin decided you were the best resource. :D

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ Thank you for your comment

[@firassabbagh9099]

I'm new, and your work is a work of art. Fantastic results.

[@briankalet1]

New subscriber, first time watcher. Amazing job, great technique! I’ll be trying these on my Subaru forester!

[@dreddmann9292]

Damn bro, your videos are the best videos I've seen when it comes to fixing dents. The end results are flawless.

[@DentDiscountPDRBodyShop]

Thank you Mann

[@johnnoell7690]

great info. I have the exact same dent in my Lexus suv. I watched to get ideas on how to fix myself. I am a tech . Just subscribed.

[@AnthonyVeith]

The man of steel smashes it again , love your work , wish I could come to the US to train with you, maybe one day

[@DentDiscountPDRBodyShop]

Anthony thank you for your comment. You never know it may happen someday

[@Ekacas2189]

New subscriber .. trying to learn how to repair a panel so i can fix my car . I'm loving these videos they're very helpful

[@DentDiscountPDRBodyShop]

Erika Welcome to my channel thank you for subscribing

[@putinisgod6814]

This is so crazy. You are like a master painter the Picasso of dent pulling

[@ruthbees7214]

Great job very impressive repair. Has got to be way better than a panel full of filler for sure. You would never know there was any damage what a result.😁❤

[@nickgeorgie1957]

You are the Michelangelo of the body art nor body work!

[@gavinhunt6516]

The work you do is very impressive. The videos are great, being both entertaining and educational. If I was based in the USA I would definitely want to be trained by you. Keep up the good work 😎

[@DentDiscountPDRBodyShop]

Thank you very much!

[@denzelw9664]

I just subscribed to your channel after watching a number of your videos and forwarding them to other people. I have huge for you man and owning to the fact that I admire people who think outside of the box. I’m a automotive technician and like to prove people wrong when they conclude something can’t be done. I just wish you were in my area so you could repair a mini right rear panel with a dent. Jah guide, protect and watch over you while you do what you love, more blessings me seh.

[@DentDiscountPDRBodyShop]

Welcome to my channel. Thank you for subscribing.

[@btqy]

My sister had a dent on her Venza rt/frt.qtr panel. Cause by a runaway Walmart shopping cart. Left a 2 fist size dent. I tried the heat gun with a strong plunger....Nope. I unhooked the wheel well cover and couldn't pop it with my hands. Finally got the old 3ft, 1/2 " Crowbar used the tire as leverage and pop 90% of that dent out. Respect.

[@DentDiscountPDRBodyShop]

Right on my friend that’s how we do it

[@zacharycrawford6519]

New subscriber. Been in collision repair for 12 years. Looking to learn this technique.

[@Breadmakerc]

Man of steel! I’m a new subscriber and current PDR tech. You’re the man!

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ Thank you for your comment Chris I really appreciate that coming from a Pdr tech. welcome to my channel

[@theblacktopsliders8190]

Hi. New Subscriber from the UK. I cant believe the size of damage you guys can deal with using glue tabs and PDR. In the UK PDR deals with small parking dents only. No way these jobs would be done without weld tabs and full panel paint. Amazing skills!!!!

[@ohger1]

When PDR started here in the colonies back in the 90s, they also were limited to typical shallow dents, dings, hail damage etc. and wouldn't touch anything with a crease or anything on a body line. I just think it's a natural progression of the art. If PDR is more recent in the U.K., this will naturally catch up.

[@wyattoneable]

Hello and happy new year. I'm a DIY guy just researching the process and came across this video. Subscribed and looking forward to my first attempt at PDR!

[@DentDiscountPDRBodyShop]

Happy new year!

[@mohammedanwarmahmoud8666]

Am a new subscriber, this is the second video I see, my favorite is spraying rather than body work,.. but, your methods are cool, .. I spray painted my old beat up vw beetle, back in 1980, Pearl blue

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ Thank you for your comment Mohammed and welcome to my channel

[@mrmarcink1300]

New Subscriber! Great work dude! A lot of your success stems from the passion you have in your craft. Keep it up

[@dondenny2534]

Great job again! I I’ve seen a lot of your videos and I am still amazed at your results.

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ Thank you Don

[@3rdkind]

Your glue work is really impressive sir it doesn’t get any better

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ You can click on the link hit the tool button my glue is on the site Thank you for your comment

[@fishin-4-mondos296]

As a claims adjuster who writes estimates all day long these videos amaze me.. Some of these panels I would be you couldn't get it back and then at the end im floored.. great job

[@ohger1]

The problem is that if you write up as a PDR repair, the repair may not be satisfactory to the customer, and then the entire job would have to be redone and the PDR costs lost. I think this is too much of a skill to expect most body techs to learn and master.

[@dolnick7]

I'm enjoying the shortcuts.

[@denvernow7294]

Love the detailed information. Some steps are more than a little obvious though, and don't need to be verbalized. That's about the only thing that would stop me from watching more videos.

[@jmendo2546]

I can't believe how well Glue work's, I figured the glue would let go under pulling pressure. The person who put the dent grazed a Gas station pylon, they have to be really happy with your work

[@bigmike892012]

New subscriber, I could watch this all day. Simply amazing

[@DentDiscountPDRBodyShop]

Welcome aboard!

[@jhonnymichael5850]

Greetings Congratulations for the wonderful work of him. Please tell me where her garage is so I can take my car to her. Thanks

[@windowcreek1798]

One word...MAGNIFICENT.

[@DentDiscountPDRBodyShop]

Window Creek thank you for your comment

[@thomasfischer2638]

Every time i watch your videos i am truly impressed 👍

[@DentDiscountPDRBodyShop]

Thomas thank you so much I really appreciate that

[@thomasmorrison2431]

This guy is a master of his craft!! Awesome video

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ Thank you for your comment Thomas

[@barbiejaye8623]

Excellent work. I got my door pushed in about 1/2 inch. Not one body shop was able to do the paintless repair. I can't beleive it! It is one tenth of the damage you showed in this video. Thanks for the video. By the way, the low bid was $500.00.

[@waltoliver6704]

I appreciate your video instructions and your great attitude

[@ndikumndikum4441]

This must be my final bus stop!yesssssss!!!!!❤❤❤❤❤❤

[@CNCmachiningisfun]

A pole attacked my shiny new truck yesterday. After 40 years of motoring, the pole, and god, waited until I got a new truck, before lashing out at me. Your methods just might fix most of the damage :) .

[@DentDiscountPDRBodyShop]

Thank you for your Comment

[@pimpeksadelko]

I'm Polish. I've been watching your work for half a year now, it's a very good job. I am learning from you all the time. You are my idol.

[@DentDiscountPDRBodyShop]

secretpdrpaintlessdentrepairtrainingonline.com/ Thank you for your comment my Polish friend

[@glenrugh2815]

I'm a new subscriber and I'm impressed . Nice job . Thank you for sharing .

[@Changgabriel175]

Great job body. I learn from you in every video you send up

[@DentDiscountPDRBodyShop]

Yuri thank you for your comment

[@daddyyankee9404]

New here from Vanuatu 🇻🇺 Love this video. It really gives a lot of good ideas since I am learning panel beating here

[@DentDiscountPDRBodyShop]

Daddy Yankee thank you for your comment and welcome to my channel

[@johnburcks7390]

I’m very impressed! Great methods and great results!

[@alonzowilliams3606]

New to your channel this is amazing how you get the giant dents out. I definitely want to learn more

[@FredmChoice]

Superbly Finished Love this Segment

[@DentDiscountPDRBodyShop]

Thank you my friend I really appreciate it

[@eddylorenzo5033]

Been watching a few of ur videos past year or so just subscribed u do one heck of a great job flawless

[@DentDiscountPDRBodyShop]

Eddy thank you for subscribing welcome to my channel

[@lancecpldave]

That's pretty impressive I grew up doing autobody and paint and am trying to get back into it. We never did any paintless dent removal but it seems awesome I would like to learn how to do it

[@DentDiscountPDRBodyShop]

David thank you for your comment secretpdrpaintlessdentrepairtrainingonline.com/ One on one training send me an email on this link

[@scurtumarian8725]

Love your stuff. Doing my apprenticeship right here

[@allanfelix8581]

New subscriber I am aiming to open a panel shop with my son thanks for your videos looking forward for your next videos

[@DentDiscountPDRBodyShop]

Allan thank you for your comment

[@SuperchiefApache]

I need to purchase some of the PDR rods you use for cleaning up a pane. I have a 1959 Apache that has some hard to reach spots that these would be perfect for. Dude, you are freaking amazing!

[@DentDiscountPDRBodyShop]

Thomas thank you for your comment I appreciate it

[@JeffPuccetti]

OMG Ken I just stumbled across your channel.... Congratulations buddy.... Looong time no see.... 😊

[@DentDiscountPDRBodyShop]

my silicon valley business phone [phone] text. shoot me a text so we can catch up

[@draganjovanovic7698]

I am delighted by yuor PDR work ! I am a new starter in this job and need ing

[@DentDiscountPDRBodyShop]

Thank you

[@draganjovanovic7698]

You ask for coments and I realy enjoyed watching your videos and learn a lot by yuor smart ideas in PDR work! Thank you again very much! Dragan

[@dinsefoali3532]

Very interesting work with your brand knowledge to fix dent body.

[@Mikeypug]

Big fan always try to find you tabs that u say are in description below but all I ever find is tee shirts and coffee mugs

[@gutersteinker]

Amazing technique, very impressed with your before and afters

[@DentDiscountPDRBodyShop]

Thank you for your comment