I had the same problem. In my case the pump had to be primed after long storage. Remove back plate by unscrewing 4 screws on corners. Pop out the flow meter, disconnect it by gently puling the connector. Locate the hose thats going to the pump. Turn on the machin and press water dispensing button. With the big syringe full of water pump the water in. Repeat it couple of times or until water starts pouring. Hope it helps somebody. Cheers.
@mxxmikexx13 жыл бұрын
Live saver my friend za zu! I just picked up one of these machines yesterday for $40 at a garage sale. Hadn't been used in years from what original owner told me. I tried testing it and I heard pump running but nothing came out. Followed your advice, primed pump and it works! Then i descaled everything and cleaned and this machine lives on!
@mattiasrossetti78602 жыл бұрын
Hello, how are you? I'm having problems with the machine, when I press for the coffee to come out, the water comes out through the skimmer and not where the coffee should come out. Do you know what it could be? Thank you very much
@harrybertdoener3487 жыл бұрын
Finally, was the pump defect? Ive the same problem. Pump buzzes but no water, coffee, steam, whatever....
@harrybertdoener3487 жыл бұрын
hey thanks! I already ordered a new pump. if its not, I will try to change the flow-meter. But the flow meter seemed fine when I tried it manually and by blowing. The tubes were completly dry. Thanks mates for your friendly help! Would you say this machine is still a good grab? Or would you always prefer non big electronics, pure espresso machines without pods or bags?!
@harrybertdoener3487 жыл бұрын
Hey Yossi! Thanks for the help! I ordered a new one and will see if it works then! Would you still recommend this machine due to its outdated model, or is there a similar good pod machine in this price range? Best regards Chris
@Tokixkitti7 жыл бұрын
what is considered soft water? my office machine is leaking and only give half a cup of espresso. but when i clean and descale it, its a full cup of water....
@7777Leander6 жыл бұрын
Hello, mine doesn't pump any water (no coffee, water or steam). The floatation device seems to work fine since the led on the front responds to water level correctly. The tubes are completely dry, I I'm thinking the pump needs cleaning or is defective. My issue is I do not know how to extract the pump. Would u have some advice regarding how to dissemble the machine so as to be able to extract the pump? I would really appreciate it!
@kanencoffee6 жыл бұрын
If I remember correctly you can get to the pump from the bottom back of the machine.
@joselatorre81405 жыл бұрын
Hi my lavazza point expresso won’t turn on do you know what could be the problem
@anthonyhaddad97064 жыл бұрын
Fuse
@seb13 жыл бұрын
After replacing the pump on my espresso point machine, the presets (short, medium, and long shots) no longer turn off automatically. Any idea what could be causing that or if there is a way to program those again?
@eslamelsherbeeny40053 жыл бұрын
I have the same problem do u fined any solution
@seb13 жыл бұрын
@@eslamelsherbeeny4005 I have not found a solution yet.
@jrellsz2 жыл бұрын
@@seb1 hello, not sure if you have figured this out yet, but it may be the hoses on the flow meter are on the wrong sides. Switch them see if it fixes rhis
@MoesKeckeEcke11 ай бұрын
then the flowmeter does not work, machine counts pulses and stops when reached a certain number
@anthonyfiorante12 күн бұрын
Did anyone figure this out? My presets aren't working also. I didn't replace anything. Not sure what needs to be fixed to get my presets to stop automatically.
@joselatorre81405 жыл бұрын
Hi where are you located
@kanencoffee5 жыл бұрын
Berkeley, CA : website: kanencoffee.com
@esco4897 жыл бұрын
The one that I have works but top leaks on tray Also. Can someone help
@michaelcolucci57345 ай бұрын
That problem you just described is common with those machines that means your issue is that you have a leaky chamber membrane and it needs to be replaced in order for it to work again there is a website called lavazza repair and they will most likely have chambers to fix your machine if you have any questions please contact them.