Looks like a useful video but unfortunately it was almost impossible to hear a lot of it due to the music in the background. Why is this music necessary? Why?
@esoulbike5780811 ай бұрын
Hahaha, the music does seem to be messing with it a bit, we'll take care of that later on, thanks for the suggestion.
@stephensutters24518 ай бұрын
Totally agree. Is this an instructional demo or a music video
@user-qs8lj7ql3h7 ай бұрын
Will you ever consider increasing the number of pedal assist levels from 5 to say 9 on the display LCD8H like bafang displays offer? This is especially helpful for cadence sensor bike setups. More levels means more precise control
@cv777ful8 ай бұрын
May I know what voltage the notches are set to on a 48v battery? in my case from 52.4 up to 48.5 indicates full battery. on 47.5 instead it loses a notch. in theory the battery should discharge at 40V right?
@H4N5O1O10 ай бұрын
is there a way to shut off the low V cutoff ? its turning off after 5 min riding even with the other v one set to 0 which is -2v (so38v) ??? yet take batt out n reseat turn back on and it reads 48v ish, makes riding impossible.
@briivison8985Ай бұрын
My bike setting are the same speed every setting how do I change it
@geemanns49498 ай бұрын
Anyone know how to adjust walk mode? Mine has too much power in walk mode....please help to tune down????
@xrayesel11807 ай бұрын
i have lcd3. it dosent show speed or watts it only say 0 . when i bike speed only show 0 and the watts only show 0. but doesnt show much battery i have and the speed only shows zero and zero watts. . everything works well pas and throttle. but not speed and watt and battery indicator
@jimmyjames8736 Жыл бұрын
My new LCD8H has a C15 setting but all the data I can find stops at C14 just like in this video. Can you tell me what the new C15 setting does?
@esoulbike5780811 ай бұрын
They may look alike, but they're not the same model, and this LCD8H only has C14 parameter settings, not C15.
@jimmyjames873611 ай бұрын
@@esoulbike57808 Okay. My bad. I had thought this channel might belong to the KT company.
@chrismartin64272 ай бұрын
@@jimmyjames8736lol mine is the same I have no idea what c15 does either 😂did you ever find out what it does
@markjulian5225 Жыл бұрын
anyone happen to know what the function c15 does? I just bought this and noticed it. Offers settings of 4 5 and 6
@esoulbike5780811 ай бұрын
They may look alike, but they're not the same model, and this LCD8H only has C14 parameter settings, not C15.
@Chriswoodworker Жыл бұрын
Where could I find a list of all the settings and what they do. Would be very handy.
@mordijedede2557 Жыл бұрын
The manual maybe. Just searh product name and manual👍
@esoulbike5780811 ай бұрын
You can go to our store and ask for customer service, here's the link: www.aliexpress.com/item/10000423698968.html?
@davidbarbieri69 Жыл бұрын
hello I have a cyrusher xf900 750w rear wheel motor electric bike (given on the site) with a monochrome display. I want to buy a KT LCD8 color display combined with a KT 750W controller, can you give me the references of the controller to buy? I specify that the controller fits into the frame of the bike so it should not be too bulky! Thanks for your help. Cordially
@mozzjones6943 Жыл бұрын
Look at the measurements of the KT controller before buying and see if it will fit. What amps do you want? 25a controller? 35a? What is the amp rating of your OEM controller? Do you want to match it or upgrade? Be careful if upgrading you don't go too high! Your battery could die, Your wires could fry.. and down the line so could your motor lol
@rekt6430 Жыл бұрын
What does C2 mean and do? I tried to experiment and set it to 1 and it make a very loud scratching noise when trying to ride and the motor woudl shut off and a short distance. Would it damage the motor when change this?
@telx2010 Жыл бұрын
It's to set between different controllers that use either sine wave or square wave feed to motor.
@esoulbike5780811 ай бұрын
You can go to our store and ask for customer service, here's the link: www.aliexpress.com/item/10000423698968.html?
@radurcАй бұрын
My battery indicator no longer drops below 4 lines. The battery is 48v and the indicator has worked well so far. How can I fix this? This happened after I used it with the battery almost completely discharged. From 0 lines it went to full without charging the battery. Since I charged the battery, it no longer indicates correctly. Can you help me?
@esoulbike57808Ай бұрын
ok, This requires you to fully charge the battery, plug in the display and then take a look after cycling for a distance
@radurcАй бұрын
@@esoulbike57808Yes, you were right. After charging, it seems that the battery level drops again. Thank you!
@banned4xyet Жыл бұрын
How do I set it for a 72V battery?
@esoulbike5780811 ай бұрын
You can go to our store and ask for customer service, here's the link: www.aliexpress.com/item/10000423698968.html?
@andreixzi38947 ай бұрын
I forget my password !! Can I reset it??
@user-vn4kw4fd2o8 ай бұрын
How to switch off pedal assist completely?
@sausisier6 ай бұрын
Personnellement je vous conseillerai de le débrancher car je n'ai pas trouvé d'autres façons
@sr166 Жыл бұрын
How do I turn off power assist?
@chrismartin64272 ай бұрын
Don't plug it in
@chrismartin64272 ай бұрын
You can turn off pedal assist by not plugging it in or not fitting it all together
@HAMMER-V100 Жыл бұрын
Hey, does this display work for 52V?
@bobbydigital2475 Жыл бұрын
I use this display on 52v. At 600 Miles no problems
@demusmarcus82404 ай бұрын
I have 52 vault with a 2000w having a nightmare with settings and speedo.has stopped working
@HAMMER-V1004 ай бұрын
Yeah mine worked fine so thats strange, I would warranty the display.
@demusmarcus82404 ай бұрын
What are tou settings as i can only het 30mph max 1500w 52v@travisgallant3431
@HAMMER-V1004 ай бұрын
@@demusmarcus8240I never modifed my settings, I got my kit from NBpower and they updated the settings for me, I don't even know how to access it lol
@andreixzi38947 ай бұрын
How can I reset the password if I forget it, is any one know how to do it?
@ST0N3D Жыл бұрын
you missed the setting i needed. to those who live in USA and what mpg/f change UNT to setting 3!
@SuperNanda19792 жыл бұрын
Hallo. Ich brauche Hilfe bei meinem ktlcd8 Display, das Display ist mit einem bafang 36V 250w Motor verbunden einem 30.6V Akku. Brauche die richtige Einstellung. Danke und weiter so.
@esoulbike5780811 ай бұрын
You can go to our store and ask for customer service, here's the link: www.aliexpress.com/item/10000423698968.html?
@petersharps392310 ай бұрын
on Aliexpress you can see a much nicer interface than you on this display, does it have the ability to change the interface(in menu) ? :)
@cv777ful8 ай бұрын
is possible change interface with new?? i have same as in your video but new is more beautiful