Lead flat roof, how to make a bay

  Рет қаралды 10,263

roofing shite Roofing

roofing shite Roofing

Күн бұрын

Пікірлер: 23
@bennewland3933
@bennewland3933 3 жыл бұрын
One of the most useful videos on lead ,well done sir
@davidkneale7455
@davidkneale7455 2 жыл бұрын
I've never tried leadburning without a solid backboard. Very impressive!
@kyegebb3735
@kyegebb3735 3 жыл бұрын
Do a lead roll end video please, on how to do them/boss them ? 🙏
@dwbconstruction4856
@dwbconstruction4856 3 жыл бұрын
Nice that you put a piece over the roll, will be using that next time 👍🏻👍🏻
@andrewlyon2707
@andrewlyon2707 2 жыл бұрын
How big do you make the overlap
@tompirozek4490
@tompirozek4490 3 жыл бұрын
Love watching you manipulate the lead and make stuff but a question, if there was a gap at the end of the stick thing on the roof you wouldn't then need to cut the back out on the upstand....no? Just a thought
@roofingshiteroofing1189
@roofingshiteroofing1189 4 ай бұрын
@@tompirozek4490 only on the undercloke
@michaeltrimmer8899
@michaeltrimmer8899 4 ай бұрын
When you simulated the under cloak on the over cloak side why didn't you extend to the flat, just saying good video
@roofingshiteroofing1189
@roofingshiteroofing1189 4 ай бұрын
Your not supposed to. You nail the first third just over halfway
@roofingshiteroofing1189
@roofingshiteroofing1189 4 ай бұрын
31 July 2024
@rajeeb3500
@rajeeb3500 3 жыл бұрын
What nozzle you using there? Thanks
@roofingshiteroofing1189
@roofingshiteroofing1189 3 жыл бұрын
No 3
@rajeeb3500
@rajeeb3500 3 жыл бұрын
Do you change for code 4 or vertical welds ever?
@PeakyBlinder
@PeakyBlinder 2 жыл бұрын
Why not just set you wood roll back 5mm then you won't have to cut the back of the roll out.
@roofingshiteroofing1189
@roofingshiteroofing1189 2 жыл бұрын
Simple. It's has to go over the lead that is already on the roll. The overcloke must cover the undercloke. So you can lay the undercloke without cutting the back out, but not the overcloke
@PeakyBlinder
@PeakyBlinder 2 жыл бұрын
@@roofingshiteroofing1189 of course it does, Didn't think of that, 👍 But you could do it with the under cloak so you only need to cut 1 side out. Would that not work.
@PeakyBlinder
@PeakyBlinder 2 жыл бұрын
Neat job.
@sunglassesron
@sunglassesron 3 жыл бұрын
I was always told I had to scrape the lead before I weld I see you don’t for your welding looks like I’ve been wasting my time doing that on new lead
@roofingshiteroofing1189
@roofingshiteroofing1189 3 жыл бұрын
I only do it when the lead is not shiny. As soon as the lead has oxidation then remove it.
@PeakyBlinder
@PeakyBlinder 2 жыл бұрын
Did you ever get round to looking at my vid called the worst roof in the world. It's quite good if you like looking at shite work for a chuckle.
@matgurd
@matgurd 3 жыл бұрын
What code?
@SocialistChampagne
@SocialistChampagne 3 жыл бұрын
code 5
@roofingshiteroofing1189
@roofingshiteroofing1189 3 жыл бұрын
Code 5
Installing Code 5 Lead Bays to a Bay Roof ***BOSSED***
26:23
SLB LEADWORKS
Рет қаралды 16 М.
Lead Installation To Stone Cornice And Flat Roof Area. Part 1
22:19
SLB LEADWORKS
Рет қаралды 10 М.
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН
how to make Slate roof leak reapir on valley #roofing
8:09
Three Brothers Roofing Company
Рет қаралды 1,9 М.
LSA: Installing Flat Roofs
4:35
Northstar
Рет қаралды 63 М.
How to knock up a Lead Bay.
15:32
SLB LEADWORKS
Рет қаралды 11 М.
How to knock up Lead Hips. Bossed Roll Ends.
12:41
SLB LEADWORKS
Рет қаралды 11 М.
WELDING and BOSSING
5:50
Lead Sheet Training Academy
Рет қаралды 152 М.
Lead dressing internal corners
4:32
Shaun Atkinson
Рет қаралды 55 М.
How to make a lead bat access slate
22:48
SLB LEADWORKS
Рет қаралды 12 М.
Leadwork pigs ear fold for corners no welding also undercloak
11:27
Shaun Atkinson
Рет қаралды 16 М.
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН