Thanks for the instructions on opening the top of this machine! I have the same model and your video is the ONLY one I found that shows how to do this. I had to replace the door latch/switch which you can see @3:41 in your video on the far right side. I may do a video on this part replacement. It is the only problem I have had with this machine in all the years I have owned it. I did give a good cleaning to the parts you mentioned while I had it open. Good video - thanks for uploading.
@charitycard671 Жыл бұрын
Thank you so much for this video! I will say that with a straw cleaning brush bent at 90 degrees could access and clean the holes in the bleach cup from underneath without have to take anything apart. Worked like a dream!
@frankgiroux Жыл бұрын
Thanks for that video! I have the exact same problem. You help me with my car, now with my washing machine! Thanks again! 😄 Have a nice day!
@DIYManiacJohnP Жыл бұрын
Thank you so much for the kind words
@jsuperman76729 ай бұрын
Yes very helpful. My mom has the same machine, just a different name. I took the back off , but didn't think to look up. I will clean that tray for sure and go from there, great video, thanks
@Lozzz76Ай бұрын
Oh my … this video is so informative. Sometimes people like me need to be told how like ABC 123 lol. Great content, thank you !
@DIYManiacJohnPАй бұрын
Thank you for watching
@murraywest1862 жыл бұрын
This fixed my problem thanks to the maker of this video
@jnako4361 Жыл бұрын
Yup that’s exactly what it is! Sometimes if you have hard water or just corrosion, it can also block or creative build up in that little hole from the beach cup when the water gets flushed
@robmead31302 ай бұрын
Thank you! Excellent video
@DIYManiacJohnP2 ай бұрын
Thank you for watching
@user-jr8tz6gi2i Жыл бұрын
Thank You sooooo much-driving my crazy, I couldnt find it!!!! THANX JOHN!!!
@WiliamShattner Жыл бұрын
I have the exact washer and same leak! Thanks!
@therealrollaz2 жыл бұрын
The "gunk" was probably fabric softener being put into the wrong place.
@jnako4361 Жыл бұрын
And thank you for identifying the issue and sharing with us in KZbin land!
@juanmanuelmarquez49452 жыл бұрын
Very informative my dude!! Kudos!!
@inay6484 Жыл бұрын
Thanks for the video! Very helpful 🙏🏻
@hazelrah321 Жыл бұрын
Why would they design an overflow port to drain right into the back of the machine?! Couldnt a hose have connected it to the drain pump at the bottom? Astoundingly poor engineering!
@sonumonu55532 ай бұрын
This is so tjat after 2 or 3 years people spend another 900 and buy a new one 😮
@tessaih0311 ай бұрын
I have same brand and same problem will try this method. Hope it works🙏
@marcbarnard72682 жыл бұрын
Thanks buddy!
@mexps80932 жыл бұрын
Thank you! very helpful
@gregorio464610 ай бұрын
I have “new” Krib Bling with no dispenser and it leaks 5 lbs of water every time I fill it about a few inches high, even if I fill it through the top door, machine unplugged. I guess it’s by the grace of God that it has not blown up in an explosive short circuit by now.
@mikebadilla6970 Жыл бұрын
Thanks
@blurrr5555 ай бұрын
Good description video
@DIYManiacJohnP5 ай бұрын
Thanks for watching
@jude41842 жыл бұрын
Any idea how to replace those inner inlet hoses? “/ I can’t get access to inside the back up top
@HB-tt1kn2 жыл бұрын
👍
@devilsmustang2137 Жыл бұрын
Hi my washer is leaking from the softener dispenser, cleaned it out and still leaks, overflows. But I don’t even use it, I use detergent pods. Is there another solution?
@frankgiroux Жыл бұрын
Check for dispenser dammage. Sometime, the thub "hit" the dispenser and it damage it. Plus, check if your thub is still centered. Mine is offset and the liquid barely fall on the edge of the thum itself. So, if the dispenser is damaged, the water comes out of it like splashing in every directions. That is what I had as problem. I was able to fix it, but you can easily buy a new one and replace it yourself. (I'm still trying to figure out how to center the thub though. Probably by turning the top of the rods that support the thub. (Seems to have some threads at the end of the rods or maybe a nut... story to follows) 😁
@melsay1 Жыл бұрын
Disconnect the softener plug, like in the vid, only the one that connects to that.