Mine does the same when I chop the throttle the revs hold high for a while before returning to idle is this the same?
@duneblogger681 Жыл бұрын
In this video it was pretty boggy. If yours has a hanging idle. Kinda like what you said, revs up then takes a while to come back to normal idle, it could be your air fuel screw needs to be adjusted (turned in a half turn) see if that helps. Or you could have a slight vacuum leak around your intake gaskets. Hope this helps. Id try the air screws first. A good ball park is 1.5 turns out from being fully seated to 2 turns out.
@jackmoyer74375 жыл бұрын
Yea thats how mine was after i broke mine in after rebuild now i got her richer and runnin hella good.
@reggiexp69 Жыл бұрын
same it was all fine after rebuild 6h later but also temps droped from 35C summer to 20-25C Celius i had it running great (1.5 or 2 turn air screw) no snorkle on air box stock lit no holes and twin air air filter, 22.5 pilot 210 main. ran great till the colder temps it had a horrible bog low end like it falls on its face... so i put the snorkle back on the airbox lit, a bit better then someone said turn air screw at 1 turn and i did that and boom it works again but yeah that means pilot was lean what seems logic i see its 25 not a 22.5 and my carbs are 26/28mm rdlc 31k carbs that are a bit different. anyway i ordered 25 and 27.5 pilot jet waiting for them to come, hope that fixes my issue so i can remove the snorkle and turn air screw at 1.5 or something again cause it does run but it feels like its been hold back.