RG Group 650 North State Street York, PA 17403 www.rg-group.com/
Пікірлер: 20
@hydraulicengineering37924 жыл бұрын
Very nicely explained! Totally informative and trustable source of learning! Gratitude 🙏
@hamzamuhammad7497 Жыл бұрын
Thanks for the information on the video.when do we skive a hose and when do we not need to skive a hose?
@maryyang39843 жыл бұрын
Hydraulic hose manufacturer from China think you said is helpful.
@esomnath3 жыл бұрын
thank you
@omneerajseth5512 жыл бұрын
Which is best for uses nylon hose pipe or hydraulic hose pipe long uses My my hydraulic pipe is damage now due to rusting in it
@embededfabrication448210 күн бұрын
Is there any point to using hose a larger diameter than the fitting?
@sanf1-wc8yg3 ай бұрын
excellent
@CangzhouQCHydraulicsCoLtd2 жыл бұрын
Very useful! Please feel free to contact me if you have any demands of stainless steel hydraulic hose fittings!
@jbwhittaker46452 жыл бұрын
what is the best crimper and hose,s for very large bulldozers -cat d11. komatsu 475 plus heavy mining equipment
@lamiyaakter8475 Жыл бұрын
You very good bent and plakc hoses very good bend haidolek hoses bangladwah
@moyu0220 Жыл бұрын
👍👍👍
@mustan17111 ай бұрын
Can you suggest me to wire braided inflatable hose How to parallel braided
@b-rant3 жыл бұрын
Not Aeroquip or Manuli? Not in my equipment.
@SanjeevKumar00075 жыл бұрын
Which one is best for Air @ 2000psi
@b-rant3 жыл бұрын
Neither, you want a fibre braid steel woven hose. Aeroquip 1503 is a great air application hose for example or goodyear DR-5
@harshalkatyarmal4 жыл бұрын
What is the failure reason of hose puncture.
@b-rant3 жыл бұрын
It has either been punctured, or failed from within due to a combination of metal fatigue, sometimes rust and possible over pressure. Only takes a single tiny little wire to break to be enough for a hose to fail under pressure.
@aliaminsorkhi49672 жыл бұрын
For spiral, wire gaps and high wire(basically wrong stacking) and wrong tension are the highest failure modes. For braided hose, wire loops, cross wires, broken wire and again wrong tension are highest failures. Good braiding or spiraling always depend on good wire winding.