Learning with Logan Ep.2 03 Dodge Cummins crank shaft sensor replacement

Cranks shaft sensor diagnose and replacement 03 Dodge Cummins If you like what you see any monetary donation appreciated via PAY PAL to [e-mail] Thanks for watching and for your support..

[@the_rocky_mountain_rider]

Interesting! Ive been having a long start issue with my truck and i've replaced PRV, FCA, COV, Rail pressure sensor, injector tubes and fuel filter and no change. I just got the P0336 CEL this evening and looks like this could potentially fix my long start issue.

[@ginger20037]

Thank you for this video, my 05 just threw the code today and now I have a better idea on where to find the sensor so I can change it tomorrow when it comes in.

[@keithsmith4809]

Thanks for the great video and actually showing and explaining everything. My early 04 did the same thing.

[@troyd7464]

Thanks brother great video

[@bobwhitewood7664]

Sweet vid my dude

[@Raven4122]

Thank you I saw ONE other video on the location, I just thought I would ad to the selection.

[@markmills9067]

fixed mine gap was dirty cleaned with a business card tach works perfect now

[@Raven4122]

AWESOME!

[@rjasso86]

My 04 Ram 3500 cranks but wont start. I had just replaced both batteries drove it down the highway and lost all power. Now truck cranks but wont start. My sensor has gone out before and did the same thing just lost all power. Any ideas?

[@Raven4122]

Im no expert but , go simple first, make sure all you battery connections are good, and if it happened before check you crank sensor again, you also could have a fuel problem I would check my fuel filter making sure it was getting that far at least. I have a drain on my filter holder I can crack open to see if any fuel is in there..I mean these things dont need spark they need compression and fuel to run. So if you valve train is all good for some reason you arent getting fuel..

[@travissommer1322]

My truck doesn't want to turn over every once in awhile. So I'll leave it for awhile/hour/hours and then it'll turn over and start. Is this the trouble you had?

[@Raven4122]

Mine always turned over but was hard to get it running, then it finally would not run at all. If yours is not Rolling over every time, I would check to make sure ALL your battery connections are tight, you do have GOOD batteries and other things to check GOOD starter, (including solenoid), safety switch that only lets it turn over when its in park or neutral, or (clutch in, if a standard) finally the actual ignition switch try those hope it helps.

[@travissommer1322]

+Raven4122 l checked the battery cables and they are tight. There has to a loose plug somewhere. I was just headed over to the Dodge dealer now to find out or make a appointment. I hope it's not expensive!

[@travissommer1322]

Once I got to the dealer the light wasn't around any of the letters, P,R,N,D,1,or 2. They're going to have the fun fixing it. I hope the bill isn't going to be a arm/leg.