Dangerous Electric Work Earthing Connection With the Busbar।Electric Work with Expert Electric Men

[@anothaparson]

4 years later this piece of wood is still going... Excellent work!

[@learnpassearnprofessional7467]

Thank you so much for your comments. Please share our videos to your friends and family. Like us support us for more.

[@samuelkatherinediozarago7692]

For people who ask or want to know why this is ULTRA dangerous,here is your answer: Besides from Connections etc 1-They do use only a single rod. For redundancy and safety as well as MOST importantly to Lower the resistance,you need 3 or 4 rods connected with each other.Also Dry soil =Higher resistance Wet=Less resistance.. 2-Not tested with earth resistance meter means it is a Good as a stake in ground which may not work at all!...You place 3 rods,connect resistance meter to them and test to see if it reads the guideline ohm/resistance. Else,this is just silly rod in the ground when someone is zapped and turned charcoal black..

[@elec3xn8tw0rx9]

My mind and intuition whispers that this type of work requires a technically equipped professional who does the job. Reading, watching and educating yourself about earthing regulations in an hour will tell you so.

[@avfczoff]

How confident would you be going ahead & installing an earth rod? How do you know exactly where it can be installed? Surely asking National Grid to carry out a cat scan is the only way to be safe & confirm it’s an appropriate place for a rod to be installed?

[@learnpassearnprofessional7467]

Thank you so much for your comments. Please share our videos to your friends and family. Like us support us for more.

[@Blooppenheimer]

4:12 mistake !: don't cut and use longer copper wire to increase the touching surface between wire anr the copper rod.

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.

[@Blooppenheimer]

@@learnpassearnprofessional7467 i call every people in Turkiye right now to watch this video buddy. Hold tight

[@KezzWelbrn]

its perfect to us the electricians.........

[@learnpassearnprofessional7467]

Thank you

[@mohammedwashimakram4513]

Electric room to earth menhole how many meter fixed?

[@learnpassearnprofessional7467]

Thank you

[@ajaysharma9939]

Hi, can I make the pipe earthing near my plastic water tank ? Will it be safe? Please reply

[@Radhapzr]

These guys do not know the basic theory of earthing in Electrical work.

[@bobybehroozi5878]

You should put this covered cable inside the anti-humid tube ( Foroplast tube.

[@learnpassearnprofessional7467]

Thank you

[@negrodjxijangelo6450]

how is this wrong, drive the rod in the ground connect the wire to main panel. seems simple

[@ololmia226]

ধন্যবাদ

[@stevenlawhon3695]

Rods are wrong diameter 5/8 or 3/4 needed. cable too small 6awg-2awg

[@gulzarkhan8860]

This guy is not a Electrician.

[@yahyakambi1191]

May I please know why these earthing is wrong and dangerous.

[@BarryBollox.]

This

[@samuelkatherinediozarago7692]

@@BarryBollox. For people who ask or want to know why this is ULTRA dangerous,here is your answer: Besides from Connections etc 1-They do use only a single rod. For redundancy and safety as well as MOST importantly to Lower the resistance,you need 3 or 4 rods connected with each other.Also Dry soil =Higher resistance Wet=Less resistance.. 2-Not tested with earth resistance meter means it is a Good as a stake in ground which may not work at all!...You place 3 rods,connect resistance meter to them and test to see if it reads the guideline ohm/resistance. Else,this is just silly rod in the ground when someone is zapped and turned charcoal black...

[@new-techengineering1684]

@@samuelkatherinediozarago7692 thank you

[@josephrobi6806]

5:53 ​​⁠@@samuelkatherinediozarago7692 copper😊The more rods the better myself I put two viper rods 6 feet apart 😊copper rod

[@Presso99]

Misleading video, one rod is definitely not meeting the standards, minimum 2. When i started watching this video, i would expect them to measure the earth resistance using the earth resistance meter, if it meets 10 ohms and below, it is acceptable, of course the best is 5 ohms and below, the lower the better. If it doesn't meet, what is the next course of actions? This video doesn't show all these steps and recommendations such as how to improve the resistance by using GEM, copper mat and etc. One more thing, the ground wire clamping looks so flimsy, if someone dig the soil and accidentally pull the wire, the ground wire is slip through the grip. It is waste of time watching this.

[@learnpassearnprofessional7467]

Thank you

[@Selct.1238]

how much deep in the earth muss the electrode conductor? thanks mate

[@learnpassearnprofessional7467]

Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us

[@jimmykadaviparambil9622]

Very bad connection , chance to loose anytime between rode and wire

[@JamisKool]

This is terrible ! Extremely poor work with no understanding of electrical engineering standards.

[@BarryBollox.]

Please explain.

[@influxelectricalsolution7600]

🤭🙄🙄🙄cap and jacket are in proper way but not earthing

[@cederbergfitness9797]

the green tape makes all that crap work much better ,how about using an electrician with experience

[@dishantgauswami4808]

Ye konse engineer he electric to nai lag rahe

[@kathiroliconnect3849]

Copper rod earth

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.

[@nuraddeenibrahim4039]

Please add english subtitle

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.

[@SanmartinElectricidad-Obras]

you need more tools...

[@learnpassearnprofessional7467]

Thank you so much for your comments. Please share our videos to your friends and country. Like us, comment us and subscribe to our channel.

[@benjiedingding7226]

Shuhada,, maskara,, siokol,,, Mafi mukh.

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.

[@tahirriaz7780]

Totally wrong

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.

[@dipueducation1490]

This is not a right method.

[@BarryBollox.]

Please Explain

[@piotrpiersa5459]

it is not good job.

[@learnpassearnprofessional7467]

Thank you

[@piotrpiersa5459]

@@learnpassearnprofessional7467 Look at my video, connect the earth electrode underground with a flat bar, not a cable.kzbin.info/www/bejne/aKXUiZynpM6EsJosi=Nw_muE2qu6W8lOVB

[@mathewmm2193]

Unprofessional

[@BarryBollox.]

Please explain

[@chriscs9080]

This is very professional . You just missed the point where he says it's a barbeque .