so cool watching the lights work without the hoods! leds seem nice too. I remember always having to replace them halogen 62514 bulbs all the damn time it seemed. LoL
@noahyoung83209 жыл бұрын
I emailed Luminus and this was the response I got. I hope it helps "The Luminus LED used in Q-Spot 260 was the CST-90 series, which was unfortunately discontinued last year. The best replacement LED is the CBT-90-W65S, which you can find at our distribution partners- Mouser and DigiKey. Regards, Michael Kennedy Director of Sales- Americas"
@drommerhausen8 жыл бұрын
+Noah Young (Mach1DJ) Could you provide a link to the bulb?
@mattmoreira2108 жыл бұрын
Something I really need to tell you is that diodes are ESD sensitive. This means that if you don't properly ground yourself before handling the LED COBs, you are likely (and surely) to bust the crap out of them. ;)
@praestant86 жыл бұрын
Matheus Moreira Oh come on, these aren’t sensitive micro controller IC’s, they’re high power LED’s.
@stewardsproductions13 жыл бұрын
@Techspert Go with the American DJ bro the bulbs are cheaper and you will be able to find parts for American DJ in the long run
@christopherAwaite8 жыл бұрын
I would love to see someone take a old moving head light and remove the bulb and install a led I know it can be done :)
@rgones8 жыл бұрын
I just ordered 100w leds and hardware to do that same thing to my iMove 5s 250w halogen lights LOL. Someone did this to their scanners, check this video out: watch?v=BNpG0HQGtm8 and watch?v=44pfWYzrpG4
@stewardsproductions11 жыл бұрын
I currently use the Chauvet Show Xpress
@jblcrown10 жыл бұрын
Need your help? I have the same chauvet led 260 and the same problem. one is brighter than the other.could it be the led bulb, or the diode?? Can you please help or recommend what to do!! thanks!
@Prolightingtech10 жыл бұрын
Its the Led.
@ukaszkalinowski80329 жыл бұрын
Can't find CST-90 in stock. What else will work here?
@noahyoung83209 жыл бұрын
Łukasz Kalinowski I'm having the same problem. Have you had any luck yet?
@pinoybikernj34389 жыл бұрын
i have same model but LED not lighting anymore, i check the diode LED still working. Do you think the mainboard is broken? Where can i buy parts? thanks
@LaVidaSonidera4 жыл бұрын
Is it possible to change the prism from the 3 to a 6 o8 prism ?
@MegaDjfuego6 жыл бұрын
hi I have a question, mi chauvet intimidator spot led 350. doesn't turn on led light is good because it works good in mi other moving head. do you have any idea what's wrong? i turn on the moving head and i have to wait 20 or 30 minutes for the light to turn on🤔 moivinn head goes on but not the light
@praestant86 жыл бұрын
djfuego la led power problem, either the connection or the switching power supply. Not uncommon with the 350’s. I’ve got one to fix myself.
@nadnerb21784 жыл бұрын
@@praestant8 I have one to fix now too. But I'm unsure where to start, I know this was a year ago, but are you able to help? I could send you some money for your time. I have an electronics eng degree, so I'm not totally clueless, but someone who's done it before would definitely help.
@djfrankis13 жыл бұрын
you had to change the bulb already? how long have you had it?
@MSDJALC13 жыл бұрын
Cool so technical :]
@bless7able11 жыл бұрын
Hi steward its dj bless bro what dmx sofware you use . And which you recomend me thanks God bless you
@djskor9 жыл бұрын
Is there a way to upgrade to a brighter led.
@gary2309628 жыл бұрын
did you find a way to upgrade to a brighter led
@djskor8 жыл бұрын
+Gary Maddocks I asked around but no luck.
@praestant86 жыл бұрын
Imran Shahbaz No! It’s based on led output, led driver supply, and thermal dissipation. You don’t just “upgrade” by putting something brighter in.
@djgroovematic6 жыл бұрын
would you recommend these lights used? have you had many problems with the bulbs burning out early? thanks
@stewardsproductions6 жыл бұрын
They still have a bad history of Bad LED boards however their newer stuff is built like a tank!
@praestant86 жыл бұрын
DJ Groovematic They aren’t bulbs, they’re leds
@BRAVE_dj11 жыл бұрын
is it possible that 2 diodes blows at the same time?…..can i be so unlucky?
@stewardsproductions11 жыл бұрын
Nice how much was it?
@djaurich0111 жыл бұрын
PLEASE I NEED THE SPECIFICATIONS LED BULB HAVE TO BUY THIS WOULD BUY 1000lm@3.15A 6500K White LED CHIP, but not if it really is the correct specification. SOMEONE PLEASE HELP ME Also where can I buy THANKS
@LuzYSonidoParaiso13 жыл бұрын
Do u still have the elation design spots 250?
@djskor11 жыл бұрын
My 260 stopped responding to dmx on all but tilt pan dim and strobe. Do you have any experience with this issue?
@richardpria57124 жыл бұрын
how to repair giotoo spot 400 no light.
@danielmorales-cv9hd10 жыл бұрын
Which one is it the cst90
@dirkbrueser81852 жыл бұрын
can you pls learn how to move your camera and sharpen it? thx :-)
@fireball57013 жыл бұрын
@djfrankis he said a year
@Michaeltdwt11 жыл бұрын
What bulb & where did you purchase from?? Please respond!
@praestant86 жыл бұрын
Michael Silver It’s not a bulb.
@praestant86 жыл бұрын
The thermal transfer of the LED cob on these is absolutely terrible. The designers should know better.
@bryanruedacortes35285 жыл бұрын
estimated, what voltage does the LED work?
@praestant85 жыл бұрын
Usually 5V, high current.
@bryanruedacortes35285 жыл бұрын
@@praestant8 Thank you🙏
@stewardsproductions13 жыл бұрын
Respond to this video... The Elations are a lot better