LEDGlow Under glow light install for your Harley - It's easy

[@aaronhenderson494]

Not sure if I mentioned these in the video; the wire length for the strips is 36" and for the pods is 32", I recommend 10-12" strips for under the saddle bag support bars and the lower frame tubes, 8-10" under both sides of the gas tank and either 4 or 6" for the remaining areas. Keep in mind the light pods do not come with the light strip kits, so you will need at least one (two plug) add-on power cord. Lastly, for any lights you put on the front wheel, ensure you leave a small coil of wire (2-3") up by the tree so you can turn the handlebars from L stop to R stop.

[@RiverBluffBaggers]

Looks great when it's lit up!! Thanks for sharing and ride safe!!!

[@RoadRushNation]

Thanks so much! Back at you Ride Safe and hope to catch you on the highways soon!

[@HDVIBE]

Very cool. Looks like a fairly simple install. Thanks for sharing. Love the blue against your bike. Ride safe 👊👍🇺🇸

[@RoadRushNation]

Thank you. Ride Safe

[@HouseWashingRick]

If I park in front of a restaurant or bar how long can I leave the lights on before it kills the battery

[@RoadRushNation]

These pull very little amps (I believe it’s 2amp) so you shouldn’t have any issues but a little depends on your battery if it’s has a full charge etc. Ride safe my friend

[@danielbeseth5281]

Did you use the blue wire for the all red break light feature? Where did you tie in the blue wire if you utilized it.

[@RoadRushNation]

We went back and forth on the blue wire and since you have to splice into the correct wire I just decided not to connect it. I have the Custom Dynamic strobe module and thought that’s enough. I may decide to connect it later.

[@Bigiron429]

Find your harness find the wire that is your brake light. You don’t have to splice use some posi taps easy to remove easy to install without “ splicing “ into the harness

[@RoadRushNation]

Thanks for sharing.This helps

[@Bigiron429]

@@RoadRushNation SiK Baggers has a vid on it. Helped a ton. Merry Christmas ride safe 🤘🏽

[@RoadRushNation]

@@Bigiron429 Thank you I’ll check it out

[@jeremiahsneed5709]

I have a Freind that has a set up when he press his brakes all light turn red he got them at a bike but cant remember the name of the kits do you have any Ides or which one would have that

[@RoadRushNation]

This set will do the same thing. We just didn’t connect the wires. Check LEDGlows website. Ride safe my friend

[@alexandersnider5568]

How does it not melt? Im so confused

[@RoadRushNation]

The lights and wires don’t sit directly on the motor and are made for this type of application. Ride safe my friend

[@2whoppermike104]

Easy my ass!

[@Cornmolio]

In California, it’s illegal to have a blue light anywhere on your vehicle if you’re not law enforcement.

[@RoadRushNation]

Good information to share. Ride safe my friend