How To Make Novastar RCFG File for P2 5 LED Panel ( By NovaLCT )

[@krishnaraotvs6334]

instead of music, voice in hindi Or english will make this so attractive, I think

[@Yuchip-led]

Many thanks for your advice, we will figure it out and proceed accordingly.

[@Thushara111SL]

me parts ganna thiyenne koheda

[@chuchatv1770]

Hi to know decoding code of module

[@HL4CVZ]

How many P2.5 LED modules can the LRS-350-5 power supply allow? thank you

[@Yuchip-led]

@@HL4CVZ Hi, generally 8-10pcs, with 320x160mm 2.5 LED module size. However, it depends on your module's maximum current.

[@HL4CVZ]

@@Yuchip-led thank you.

[@Yuchip-led]

@@HL4CVZ Pleasure😊

[@HL4CVZ]

@@Yuchip-led P2.5 LED panel demo in this video: Size:320×160mm Pixel: 128×64 So if I want to envision 1280X640 pixels, I need to have 10 pcs?

[@Yuchip-led]

@@HL4CVZ Correct, the final quantity relies on each module's max current. Putting a power supply in the middle of modules is suggested, instead of a starting or ending point.

[@chuchatv1770]

How to get decoding number

[@rijotech_]

How can you find out what is the chip name in the module?

[@Yuchip-led]

There are a few black chips mounted on the module's back. It has numbers and models marked on the chip.

[@rijotech_]

@@Yuchip-led I checked that but they can't be read cause they are so small.

[@SmindloMindlo]

Hello . Have MBI 5252 GP Chip. What Row Decoding must I select ?

[@Yuchip-led]

@@SmindloMindlo Hi, 138 decoding or 5958 depends on the row IC used on the module

[@supawatt.4809]

if we have module LED BUT we NOT KNOWN THAT IC CHIP is which brand and which pitch . But we want to make cfg FILE. it can be do or not???

[@Yuchip-led]

We can guide you on how to get the exact drive IC model. It's necessary to make the right RCFG file.

[@1GELIS-MP]

Can you maybe share links to all gear used on ali? Thanks

[@Yuchip-led]

Please drop us an email for a detailed solution. [e-mail]; www.yuchip-led.com

[@rehansiraj3354]

Hallo sir ic deciding number kasa. Dekha ice number to PATA ha

[@Yuchip-led]

Could you please provide more details? You can reach us through email too. [e-mail], www.yuchip-led.com

[@tbchan4526]

How to order the kit ?

[@Yuchip-led]

Hi Chan. Did you send us an email? Please drop us an email to prepare you the quote: [e-mail]; www. yuchip-led.com

[@ejrbcjj]

but that is for only one led module, and for a complete cabinet how is it done?

[@Yuchip-led]

Please drop us an email for a detailed solution. [e-mail]; www.yuchip-led.com

[@anglebertmorada1397]

where did i get for mrv336 4.6.1 version firmware please need urgent

[@Yuchip-led]

Hi Angle, can you give us your email address, please? You can also send an email to: [e-mail]. We will send you the firmware by email. Or, check our site to send an email: www.yuchip-led.com.

[@znanaznana9366]

كيفيه الحصول عل ال ic

[@MohammadBasir1996]

i need 1 new video[ \ How To Make Novastar RCFG File for P2 5 LED Panel ( By NovaLCT )

[@lalitrahulmagar]

How to find ic and decode

[@Yuchip-led]

Hi Lalit. The IC is on the backside of the LED module, marked with its model number. And each decode has a physical model, SMD1921 or SMD3535, etc. May I know which pixel pitch LED panel you have?

[@Prajapatibrand108]

P4 led panel video

[@Yuchip-led]

Can you please drop us an email? We can make a P4 LED panel video and share it with you. Email: [e-mail], www.yuchip-led.com

[@MohammadBasir1996]

need 1 new same video

[@Yuchip-led]

@@MohammadBasir1996 Hi Mohammad, what video content do you expect?

[@cityoflove3471]

Hi sir...... i need 1 new video How to make novastar RCFG File for p2.5 LED panel. 1metre×1metre

[@Yuchip-led]

@@cityoflove3471 Hi, making RCFG for one LED module and 1x1m cabinet is the same step. The difference is one receiving card connecting how many pixels wide and high.

[@Yuchip-led]

@@cityoflove3471 For instance, one P2.5 320x160mm LED module resolution is 128x64 pixels. Your one panel 1x1m resolution is 400x400 pixels.

[@cityoflove3471]

​@@Yuchip-ledhi sir. i have p2.5 led panel 1×1m cabinet. Total 18 piece screen. Connect 2 receiving card. 🖥️🖥️🖥️ 🖥️🖥️🖥️ 🖥️🖥️🖥️ 🖥️🖥️🖥️ 🖥️🖥️🖥️ 🖥️🖥️🖥️ 👆 Like this. As you show in the video. It's not like that. please help me

[@JohnJohn-gy2st]

Hello

[@Yuchip-led]

Hi John. Are you looking for further support? Please drop us an email with your specific requirements. Email: [e-mail], www.yuchip-led.com