LEGO City Update - Passenger Train Cab Car MOC 60197 🚆🏹

[@witerabid]

At some point there will just be one big endless train on each of the tracks with no break in between. On the passenger loop it'll probably happen when you add the third train to the mix.. 😅

[@RobinHoodBricks]

Sounds about right, haha!

[@Smale321]

Ooh, a third train... Can't wait!

[@EasternMaineRailfan]

Possibly 2003high speed passenger train 🚆🤔,or 2007 passenger train,wouldn’t be surprised,they are both really similar🚇🚆

[@DerAlex86]

@@micabryant4513I think that depends on the reliability of the connection. You would need at least three, better four motors, distributed evenly across the train, and they all have to run at about the same speed, otherwise the train will derail in the corners. If you have some motors that received the signal and others didn't, some run at 3 and others at 7, I think you could run into problems.

[@Orgnet23]

Omg WE NEED THAT. WE. NEED. A. THIRD. TRAIN. ON. THE. PASSENGER. LINE. LOL

[@Leaden-plural0]

It Looks Great I'm Giving you Two Spirited Thumbs Up

[@RobinHoodBricks]

Much appreciated!

[@Solbrick]

I think this is a cleaver use of the limited space in train. And of course always fun to watch LEGO trains alive in a wonderful city layout!

[@RobinHoodBricks]

Thanks, my friend!

[@brickbuilderblu]

My favorite part of all of your train vids, is listening to your commentary while you film and man the controls.

[@RobinHoodBricks]

I'm probably rambling as it's an absolute panic!

[@hubijohn7451]

Displaying all the pieces you used is so helpful! Thank you, Robin ^^

[@RobinHoodBricks]

Glad it was helpful. I screwed up and had to do it twice!

[@brickbrotherstudios1813]

When this set came out: “It’s ugly” When Robin cleans it up: ,’-) [I really like it!]

[@RobinHoodBricks]

It's a lot better set than first impressions. I really didn't like it when I first saw it!

[@visg8303]

@@RobinHoodBricks I think most of it is fine, the nose just feels a bit duplo ish with it being 1 piece as opposed to the red train which was brick built

[@jaguaretype.]

Awesome MOC! Great job! And you’ll 100% get to 1 million!

[@RobinHoodBricks]

Wow, thanks. Hopefully sooner rather than later. In fact I'd settle for 100k!

[@ChiliCheeseNuggies]

the the shot of the trains going through the city at the end sounds so soothing, i love it

[@RobinHoodBricks]

I agree. Although it is a bit noisier in real life!

[@AlrighteeMightee]

You should add a mail car on your orange and blue passenger train like you did on your white train because your white train has 7 cars, while the other one only has 6 cars.

[@redstuff1984]

You should put the little pumping car in front of the cargo train like their trying to outrun it.

[@decam5329]

😆

[@squirrelwise]

Good idea.

[@RobinHoodBricks]

I tried this but it often derails as you need a stiff bar and it doesn't have enough weight. Behind on string works flawlessly!

[@sammywithtrainsandships]

I have one of the sets, and I have a amtrak styled cab car, from the diner car.

[@RobinHoodBricks]

I used the Amtrak colouring for my subway. It looks very cool!

[@unkownromaniancollector]

If Robin will continue making more train videos, he will need to change his channel name to “Robin Train Bricks”!

[@RobinHoodBricks]

I have a few more carriages and trains on the way!

[@ecidaho]

Fair enough. I have a mix of Power up, Power functions and older electric so I have a number of locos with no power save when I swap electric powered truck on them and run them that way. Cheers!

[@josephd27]

Hehe, those 2 guys on the trailing pump car, hilarious Robinhoodbricks

[@RobinHoodBricks]

Yup. Love them!

[@Agarricus]

You should put a couple of brightly coloured studs among the ballast next to the minigolf as If they were lost balls

[@RobinHoodBricks]

Yes, this is on the list!

[@gbzombie3248]

Funny, I did this to my 60197 locomotive a few months back, but with the seating and a restroom at the back and the battery box and driver at the front

[@BinkBricks]

I added a bathroom at the back in April. It uses all the space too.

[@gbzombie3248]

@@BinkBricks nice

[@RobinHoodBricks]

Sounds about right!

[@sihocolus]

Looks nice! It kinda reminds me to the German ICE 2 where the Railcar is slightly Longer than the Engine.

[@RobinHoodBricks]

Yes this worked out very nicely!

[@BlockHeadUK]

Your mods make the train look much better at the non-driving end, well done! And good to see that you have regained control of both the trains, Ha ha

[@RobinHoodBricks]

Thank you very much. Yes this is much easier to control, so the plan worked. I'm too uncoordinated to make it fool proof though!

[@buddylee6996]

This is absolutely great Robin. I'm definitely doing the cab car retrofit to it, along with the club car add-on. Your trains are the best! Great video my friend, keep up the awesome work.

[@RobinHoodBricks]

Yes I try to keep them true to the set without getting too hung up on realism. Have fun!

[@sdlgo9]

Thank you for these instructions! I've used them to convert both ends of my 60197 as I use a 9v motor and without a battery box there's no need for a big engine room above floor level.

[@RobinHoodBricks]

Excellent!

[@BrooksBricks]

Really like the cab to passenger car mod! That makes a lot of sense to me and brings it more in line with the white train design! The way that they raced each other on the track makes me think that maybe the white one's design is just a bit more aerodynamic and leads it to gain a bit more speed, especially as it gets closer to the other one by drafting (just like race cars do!) and hence why you have to adjust frequently lol I do want to see a derailment, but at the same time I feel like it could be soooo messy in your city!

[@RobinHoodBricks]

Neither of them were on full speed during that. It's too hard to film and keep them apart at full speed!

[@mathewrushton6656]

Awesome layout

[@RobinHoodBricks]

I think so too!

[@ognjenmilicevic8530]

There is just no need for a pantograph on a control car. Very creative, perfect and rational build btw! What i would really like is to see a OBB railjet type of train in lego!

[@RobinHoodBricks]

I may take it off but I do like the symmetry!

[@ognjenmilicevic8530]

@@RobinHoodBricks looking great both way!

[@mrstgladman8612]

I have an idea so you don’t have to have 2 trains running on the same track! You could have a separate track running around your fair ground and farm! I would probably cost a lot of money since you ballast all your track but it would look very cool. Also you could have a station at your fair ground and a few smaller stations dotted around the rest of the track! I think it would look awesome! Great video! 👍👍👍😁

[@HuntingPuma378]

tgladman he has plans for the area

[@justaddbricks5527]

It would take up to much space, which Robin wouldn’t like.

[@kevin7213]

There isn’t enough room for another line

[@DerAlex86]

I also have an idea so Robin doesn't have to have 2 trains running on the same track: Only run one train per track.

[@mrstgladman8612]

Jeez! Ok, it was just an idea! 💭💭💭

[@Smale321]

Lovely conversion on that train and great control driving both of them!

[@RobinHoodBricks]

Glad you enjoyed it. You can't beat a bit of danger!

[@SJM_Media]

Excellent video, really well explained. This train started me off on my Lego train journey 2 years ago. I now have 5 trains and now buying bricks from brick link to move onto customisation which your videos are a massive help.

[@RobinHoodBricks]

Great to hear. I'm much the same but the white Fast Train started me off. I now have six trains or is it eight!

[@EricAlainDufresne]

Looks great. I wish there was more seating/details in the cab. Thank you. Loved the video!

[@RobinHoodBricks]

Many thanks. I'll be doing the same to the brand new train very soon!

[@scottosborne106]

I love the cab car it looks amazing Robin Keep up the good work

[@modelyh0]

This mod is really nice! I just don't like the double decker car because it's unrealistic to have that in this type of train

[@Eidolon1andOnly]

I agree. But the easy solution is to remove those pantographs (the bits on the roofs that are meant to make contact with overhead wires) from the engines. Since these sets were designed to look like pantograph trains using overhead wiring for power, those double decker cars are way out of place for such a train. Their rooftops would be scraping those overhead power lines, LOL!

[@modelyh0]

@@Eidolon1andOnly without pantographs, it still looks wierd because this type of train is a EMU (electric multiple unit) and most EMUs have all cars with same length and height (front and rear cars are sometimes different)

[@Eidolon1andOnly]

@@modelyh0 There are still similar style trains without pantographs.

[@Eidolon1andOnly]

@@modelyh0 Here's a photo of a train engine of similar style that is not a Pantograph Train: s.hdnux.com/photos/01/02/64/21/17515599/3/rawImage.jpg And here's a photo of a passenger train with a single dome car (the type of double decker in his trains): www.alaskarails.org/fp/passenger/JC-501.jpg So it wouldn't be unreasonable that a train could have a dome car but be pulled by an engine as in the first photo.

[@astygmatyzm9071]

@@Eidolon1andOnly That's the eurostar running on obsolete 3rd rail in Britain some time ago. It swithed to overhead wires and pantographs as it used them in France since the beginning.

[@sknne7794]

It's really really good, incredible

[@RobinHoodBricks]

Much appreciated!

[@railwayjade]

Watching your train vids makes me feel like a little boy again staring for hours on end at my Lego books (catalogues). I have yet to get my first train

[@RobinHoodBricks]

Be careful as all this started when I bought the white train. I hadn't bought a brick for over 25 years at that point!

[@CASIBRICKBORNCITY]

yes it is a success👍... it's nice to see the trains... 🚝🚆🚅

[@RobinHoodBricks]

Yes, it is!

[@clemenssokob1892]

Hallo. Just a good idea to Make to different end Cars. Loks very good. Ist's good to See the Transformation from a Engine car to a passenger car with driving compartment. You are great. Greatings by Clemens Form Vienna in Austria

[@sonicboomr]

I like that and the double decker mod you made. I've got to get some extra parts now

[@RobinHoodBricks]

You might also like another video I did for the white train, with two long based mods that are equally doable on the 60197 train. You just need to change the colours over!

[@metallonero]

That's a relativlely simple but very effective mod to the aft engine car. Although I have to say, the cargo train keeps stealing the show when the trains are moving around, and the pump wagon racing behind it is just the icing on the cake.

[@RobinHoodBricks]

Yes, it is in a class of its own!

[@karolinazadoroznaite3861]

Great train and great train layout.

[@RobinHoodBricks]

Thank you. I did a steam train more recently. Check out my Trains playlist!

[@marcusyoutubegamineer]

Looks Epic! I Could Never Make Something Near As Good As It!

[@RobinHoodBricks]

You can do it. This ended up being quite simple!

[@marcusyoutubegamineer]

​@@RobinHoodBricks You're right. But All Things Aside I'm No Where As Near As Great As You!

[@dubrunna]

You ought to be designing for Lego on a regular basis. Very creative and well done w/ everything. Building my own MOC now

[@RobinHoodBricks]

Wow, thanks!

[@BinkBricks]

The new passenger cab looks sort of creepy, a driver cab combined into a passenger car. Never before has my city seen that!

[@RobinHoodBricks]

I really like it. More variety!

[@scottosborne106]

I really like the cab car Great work Robin

[@thorstenkraft5527]

Good idea Robin to convert the rear train. I think it looks good and fits the other part of the train. The two trains are now running well together. But I think the 2 characters on the last wagon of the freight train are really funny. I love it when they pumping relentlessly :-)

[@RobinHoodBricks]

Thank you very much. Yes those two are my favourite too!

[@neilsluman8267]

Excellent mod. Am planning to do the same myself. Was thinking of buying an unbundled carriage off ebay but nice to see that this only needs a handful of extra parts.

[@RobinHoodBricks]

Yes, really easy to do. Try BrickLink maybe!

[@mattgaskill7720]

I love that cabcar! the high speed passenger train can't go to high speed now haha!

[@modelyh0]

It can, trains like ICE 2 or RailJet are push-pull that means loco is on only one side and it's still a high speed EMU

[@mattgaskill7720]

@@modelyh0 I meant it can't go that fast because it's following another train

[@RobinHoodBricks]

Well it only ever had one motor. They can go faster but it is harder for me to control them whilst filming!

[@hazzaboiii1936]

Looks great Robin Pls add another locomotive onto the cargo train

[@RobinHoodBricks]

Locomotive number 4? You know that's coming!

[@Slavador2393]

Really cool mod! Thanks for the video!😊 it's great to watch your trains in action, my favourite is the little pumper cart, lol!😅

[@RobinHoodBricks]

Thank you very much. My own design and my favourite too!

[@doglover334]

A derailment will happen by a corner, when one train hits the other train and knocks the back of that other train off the track (presumably on its side) and then the back car will hit something alongside the track, detaching the magnets, and then the other train will hit it and get stopped when the back car hits something else, either pushing the engine off the track or just stopping because it hit the barrier of the back car, so finally the train that lost its back car will crash into it. Good luck stopping that robin

[@brickboystudios7214]

Doglover 33 It’s kind of like the train is about to perform a pitting manoeuvre 😆

[@RobinHoodBricks]

That's why I need to remain vigilant and have only one controller for them both!

[@terryrushing901]

Yet again annother AWESOME idea and build!

[@RobinHoodBricks]

Thanks again!

[@projectzip]

I was looking for yellow hazard stripped bricks and they seem to be in short supply. Then I remembered your monorail 🤣 but since watching your channel and seeing the hot tea technique ive gained a bit of love for stickers. So problem was solved.

[@RobinHoodBricks]

I believe you can get them new from LEGO B&P. Let me check. Oh, no you can't. I guess I bought them all!

[@Dynamo_11]

8:49 Robin hood bricks I think your train looks amazing so far

[@RobinHoodBricks]

Great, thanks!

[@richy77]

The Cab Car looks fantastic! Looks part of the original set. And smart to change to power functions...doesn't make sense to have one unique power system for no reason...but future sets will all use powered-up I believe :(

[@RobinHoodBricks]

I agree but think it's a shame. You can't stack Powered-Up!

[@brickboystudios7214]

I really like the train update, as there is more passenger capacity! 👍 A couple of amendments that I would suggest train wise would be to add a baggage car to the 60197 passenger train, like what’s on the 60051 white passenger train, as well as adding coloured 1x1 rounded studs on the tracks to look like somebody has been up to no good at the mini golf course! 😁

[@RobinHoodBricks]

I got told off when I did the other baggage car by people saying they don't have them anymore. Golf balls is on the list. I need to go back there for a few things!

[@karenesser7185]

Adding power functions is actually an upgrade

[@RobinHoodBricks]

I like to think so too. Much more flexible and also rechargeable!

[@Jacob-W-5570]

Now you just need an old steamer with ancient passenger carriage to drive tourists around :D But I do like you mod of the rear engine carriage. might want to put that power tack off antenna down flat, because usually trains have only one of those up, which one depending on which way they are going :)

[@RobinHoodBricks]

Yes an old tourist steamer would be nice!

[@lucaswhat6486]

Love the video hope ur doing good merry Christmas

[@RobinHoodBricks]

Thanks. You too!

[@cpbricks927]

IC1 train in Europe very similar to the Bullet Trains in Japan, 2x 8 cars, joined together but spilt further down the line after leaving Tokyo or other locations, worth a look at them too.

[@RobinHoodBricks]

Yes, Bullet Trains are very cool!

[@leejoey3287]

I like it!I want to 1 for myself and make a video of it,and I will say thank you to you in the video 😊

[@mc2playzz]

I think u should make a Christmas village

[@RobinHoodBricks]

I have literally no Christmas village sets. It would be cool but they are crazy expensive now. A bit too late for me I'm afraid!

[@mc2playzz]

Oh

[@awes0men0b0dy9]

YES MORE TRAIN STUFF

[@RobinHoodBricks]

More coming soon too!

[@craby_the_wendigo5567]

Great vid robin I will watch your career with great interest

[@RobinHoodBricks]

Thank you very much!

[@erikthepirate8068]

Speaking of trains, I made my very own LEGO ALCO MRS-1 Diesel.

[@RobinHoodBricks]

I had to google it. Wow, that's a whopper of a train!

[@erikthepirate8068]

@@RobinHoodBricks Thank you. It was a very old diesel train.

[@PaPasBricks]

Awesome I just got this set and added it to my LEGO city.

[@RobinHoodBricks]

Very cool. I think it's a really good set!

[@SG-tq2vy]

Love the cabcar/dummy unit! Only if i cloud make builds like that 😅

[@RobinHoodBricks]

You can do it!

[@awesomealbertt1150]

You said that a lot of these are loosely based of of ICEs, well the red passenger train seems to be loosely based off of these Copenhagen trains.

[@RobinHoodBricks]

Good to know!

[@ironmantrains]

Control cars don't have pantographs. Interesting to note that HSTs have two power cars and some have just 4 coaches between the power cars

[@RobinHoodBricks]

I know, but I like them. I added four to my tram. Insanity!

[@ironmantrains]

@@RobinHoodBricks The more technical term for the locomotive is power car, because it's like the HST trains, as they are fixed formation. In fixed formations I call the power unit a power car. Fixed formation means the train's coach formation stays the same throughout its working day, as opposed to the more traditional separate locomotive and coaches. There must be four different voltages on your tram system if you have four pantographs on your tram!

[@jurgenblust2042]

The pump wagon is still the best of them all! :D

[@RobinHoodBricks]

My finest hour. And all in about thirty pieces!

[@BinkBricks]

I love the new can car, looks really nice, espeaclly in Brick Nottingham!

[@RobinHoodBricks]

It does!

[@Brickostan]

Nice 👍 It’s looking almost like my conversion of that set 🤣 I also changed one end to a passenger cab end, and the other end to Power Functions 😁

[@RobinHoodBricks]

Cool. Great minds think alike!

[@Sikun88]

If you want more controle Put rubber wheels on the remote. (Give the dials more grip)

[@RobinHoodBricks]

Yes, thanks!

[@John-we9io]

An elevated passenger train line would've been really cool for one of the trains, however, it probably would've been a logistical nightmare 😂

[@RobinHoodBricks]

Definitely now as I have so many obstacles. My tram line is on an elevated monorail though so that's doing the same job!

[@BackSpace101]

I wish Lego would make more passenger trains have magnets on the font and back of the diver cart.

[@RobinHoodBricks]

It probably saves them a lot of money for a feature that most kids won't miss!

[@Arlotrainboy]

im a huge train fan but within the first 3 minutes of this video i think im in la la land

[@RobinHoodBricks]

I think this is a good thing? Hope so!

[@xinlu2806]

I like your modified cab car, but I think the pantograph does not make sense. It does not have a motor (neither in reality nor in the LEGO world) so why would it need a pantograph. If you look at the Ice 2 again you’ll see it also doesn’t have one. If you want to add something on top I would go for some antennas, they could be for cellphones or communication between train and other railway workers.

[@RobinHoodBricks]

This is a good point and I've made a note of it. The set came with both and I kinda like the symmetry so no promises on removing it!

[@samuelhulme8347]

Wonderful

[@RobinHoodBricks]

Thank you so much!

[@hoarder66]

Hey again. More train stuff huh. I never cared for trains until i watched ur channel.

[@RobinHoodBricks]

I always like converting people to new areas. Lots more train bits coming!

[@hoarder66]

@@RobinHoodBricks i say it all the time... Im really only into starwars but ur just so good at making a city come to life. Plenty of people have lego cities but ur channel is the only non starwars one i can actually watch. Im sure all ut viewers would agree that u do a fantastic job of giving a lego city everthing it needs.

[@willemplugge950]

I used this on my train an it looks very great!!

[@RobinHoodBricks]

Yay, great to hear!

[@eciacud]

I really like it. Also I prefer power functions than powered up, but 9v is best in my opinion.

[@RobinHoodBricks]

I agree, to an extent. Cost is a factor but what I like about PF is the remote control aspect. It's good fun and I'm not tied to a single big dial. Also lighting I can hardwire without it dimming at slow speeds. Yup, it's Power Functions for me!

[@eciacud]

@@RobinHoodBricks Yes, true. But the biggest positive about 9v is that it doesn’t take out any space on board of the train

[@RobinHoodBricks]

@@eciacud True!

[@jamespassikoff5300]

Robin, this is a great change. I did not see in the vidio what did you do for the train motor> The power up and power functions have different connectors to the battery boxes.

[@RobinHoodBricks]

There is only one motor in this train, at the front. The new motor is Power Functions to match the new battery box. The back has just a dummy set of wheels like 60051!

[@legod1717]

Love it!

[@RobinHoodBricks]

So glad!

[@renedevilee5882]

I also made windows in the loc with the engine. Thanks.

[@RobinHoodBricks]

Very welcome!

[@renedevilee5882]

And I added light orange tiles in the middle of the roofs.

[@isaac56176]

The cab car could also be like Amtrak's F40PHs with a cab car and baggage in where the engine was. You could do it with a garage door or one of those doors on firetrucks that are gray and red. Try to find one in yellow or navy. Their nickname is cabbage

[@RobinHoodBricks]

Haha. Good name. Those doors only come in very limited colours sadly!

[@Baconbs718]

And also same with the intercity class 91 where the mk4 coach driving van trailer is used for storage but it doesn’t have big great doors on the side so it looks almost the same as the motor unit but the motor unit has a blunt end cab and the driving trailer has a gangway on the back

[@Eidolon1andOnly]

I think you should remove the pantographs (those bits on top of the engines meant to make contact with overhead power lines) from your passenger trains. Firstly, there are no visible overhead powerlines in your layout for these to make contact with, and secondly, since both passenger trains have double decker cars, if there were overhead powerlines, the roofs of those cars would be making contact with those powerlines. The double decker cars are a cool creative touch, but would never be used for a pantograph train for the exact reason I mentioned. By removing the pantographs, we can imagine that these passenger trains are powered by some other means rather than overhead lines.

[@RobinHoodBricks]

Well I think in a LEGO city we can forgo a bit of reality. I mean the cars have only one seat each after all. Double decker cars are fun and so are pantographs. Adding loads of wire will make the city too congested with poles etc so I think this balance is about right!

[@Eidolon1andOnly]

@@RobinHoodBricks I agree about adding physical lines for the pantographs making everything too complicated. I know not everything is too realistic in Brick Nottingham. I thought by removing the pantographs it would be fun to imagine that these trains are successful APTs (Advanced Passenger Trains) and perhaps the only successful APTs ever built in the UK, which in itself is highly unrealistic. You should check out a channel here on KZbin called Mustard and see their video about the APT aka British tilting train. Just an FYI, the technical term for that style of "double decker" you chose to use is dome car.

[@TrainsForNSWVlogs]

In Sydney we have double deck trains with pantographs. Just refer to the train we call W Set because it is a 4 car EMU in a Single Deck+Double Deck+Double Deck+Single Deck. Now days since the W Set has since been retired we run full Double Deck EMUs

[@binkman67]

Great video!

[@RobinHoodBricks]

Glad you enjoyed it!

[@landwandetaylor9782]

Cool train

[@RobinHoodBricks]

Thank you very much!

[@audiotron1003]

Another good train video seems you need a second train room.

[@audiotron1003]

Tried to go into your link as I bought stuff from amazon but couldn't seem to ink. How do I support you when buying from amazon?

[@RobinHoodBricks]

Mrs Hood says, no. For Amazon I think you use the link and then shop as normal. I think the magic happens in the background. If you can tell me roughly what you bought, or when, I can see if it made it. No pressure though!

[@audiotron1003]

@@RobinHoodBricks I bought a can of rustoleum orange paint and 100 zip lock bags on friday

[@RobinHoodBricks]

@@audiotron1003 I'll check!

[@ZavSTVwithTOYGAMELECTION]

It is hard to change the Passenger Train from Powered Up to Power Functions for the fact that you have to get more space for the addition of the IR-Receiver and you can’t use the same train motor.

[@RobinHoodBricks]

Yes but the space for the IR receiver is already there so it's very easy. You do need a PF motor too!

[@puppetguy8726]

I like it!

[@RobinHoodBricks]

Woop woop!

[@giuseetr521]

Great you video great job fantasy Train new subscribe👌👌👌👏👏😍👍

[@RobinHoodBricks]

Welcome, my friend!

[@MikesLegoTransit]

Well, now it is an ICE 1 train 21:19 !!!!!! 🤣

[@RobinHoodBricks]

Yes, I was using that as the example!

[@cpbricks927]

on my 60197 train, I put Jacobs boogie on it, runs so smooth, maybe you should try it.

[@RobinHoodBricks]

I've nothing against that but this runs smoothly as well and I'm always swapping the order around. Can't decide!

[@Orgnet23]

Hi there Robin Hood bricks! I don’t know if you will really understand this but I am the one who commented about a coustum buffet car for this train not realizing that it already had one (and I also own one) and a lot of other things! This is my alternate account! My other one got banned for some odd reason and this is me on an alternate one! My old username was ChrissPlayz but I later switched it to John apple seed for fun!

[@RobinHoodBricks]

Hi again. Great to have you back!

[@Orgnet23]

And it’s great to be watching again!

[@Orgnet23]

Oh, and Happy New Year!

[@gabricks1224]

I think it’s better without the antenna like you mentioned with the express passenger train cab car video, that cab cars don’t really use antennas

[@RobinHoodBricks]

They can do. It depends on the train apparently. Anyway, I like a bit of variety!

[@gabricks1224]

@@RobinHoodBricks ya know when I do make my own cab car, I might just remove that grey/dark blue symbol, and have the whole cab car with windows and extra seating, like most german passenger trains I’ve seen since childhood, plus the wheels I would change the one where the motor use to be and and change it to a boogie and make the bottom part a little bigger

[@Baconbs718]

the first car right next to the engine car doesn’t need a gangway to the engine like the intercity class 91 and then add a second cab at the back end of the engine car like the class 91

[@AussieBricks]

Very similar to my attempt. Looks good.

[@RobinHoodBricks]

Cool, thanks!

[@natavia75]

I love your video

[@RobinHoodBricks]

Thanks. You're welcome!

[@stormbowman7148]

I would put both pantographs on the engine car. They should face away from each other. That would be more prototypical. Normally you don’t have pantographs on the driving trailer.

[@RobinHoodBricks]

Yes, you're right on there not being a pantograph on the back!

[@lukesjunction2508]

Hi robin It's not a cab car In the uk it's called a DVT Driving van trailer

[@RobinHoodBricks]

That's a mouthful. I think I have to use a term that most people around the world, of all ages, will understand. Good fact though!

[@Brick-Life]

Looks a lot nicer and how it should be. Not a fan of engine cars with only room for a driver.

[@RobinHoodBricks]

Thanks very much!

[@Kyle_v2]

i like trains, i like lego. Time to get lego trains.

[@RobinHoodBricks]

I also like trains, LEGO and, therefore, LEGO Trains!

[@HuntingPuma378]

Yay fantastic video 4th

[@RobinHoodBricks]

You rock!

[@amtorraziert]

Honestly, i thought that that lego train was based on the British Eurostar trains. It has the color scheme of the Seimens Valero Eurostar but the configuration of the older Eurostars. However, I guess the Seimens Valero has also been used for the ICE 3 trains of Germany (both of the Ice 3 train types are in fact from the Seimens Valero family). Besides, the Ice trains have the german long-distance trains color scheme. Which is white with are stripe. The lego set 60051 has a similar color scheme and in my opinion is based more on the Ice trains, mainly the ICE 3

[@RobinHoodBricks]

Yes I think you're right!

[@leejoey3287]

For me, I call the 60197 the Legostar since it’s based on the Eurostar and I like your End Car, but I will remove the top pantograph

[@RobinHoodBricks]

That's a good name for it!

[@leejoey3287]

@@RobinHoodBricks Thanks!