Lego Gun, Pistol, Glock that shoots. INSTRUCTIONS

[@kieranmilner4208]

The best way to sneak Lego into a American high school

[@SpecialFragoutYT]

haha damn

[@thisisntsergio1352]

😭

[@paranoialshock2039]

Fuck you u made me laugh

[@paranoialshock2039]

@@Rootgm08 r/technicalythetruth

[@finleyfynn7665]

Hahahha

[@timmy21r]

Parts list: 22x 3M blue pins 1x 3M beige pin 10x 1.5M beige pin 2x 3M axle pin with 2M pin 16x 2M black pins 1x blue axle pin 2x beige axle pin 2x 1M axle with ball joint 3x 1M beam with pin (3:57) 1x 9M beam 3x 7M beam 4x 5M beam 5x 3M light grey pin with perpendicular hole (6:33 top) 3x 15M beam 6x 11M beam 5x 3M beam with cross axle 1x 2M beam with cross axle 2x 2M beam with axle hole 4x 2M axle 5x 3M axle 2x 4M axle with stop 2x 5M axle 4x 4x2 L beam 3x 3M pin with stop bush 3x 3M beam with axle hole on top (10:46) 1x 3M beam 4x 1M bushing 6x 0.5M bushing 2x 8 tooth gears 1x 4x6 angular beam (4:37) 2x axle joiner with perpendicular hole (6:48 bottom right) 2x pin joiner (7:26) 1x axle-pin T connector (7:02 top right) 4x 3x11 Technic plate (8:24) 4x 5M thin beam with axle holes at ends (8:55) 2x 7M thin beam Magazine: 3x 3M blue pins 1x 3M beige pin 4x 2M black pins 1x 3M axle pin with 2M pin (11:58) 8x 3M beam with cross axle (11:11) 3x 2M beam with cross axle (11:28) 3x 11M beam 1x 3M beam 1x 5M axle 1x 4M axle 1x 3M axle 1x 2M axle 1x 10M axle 2x 4M axle with stop 2x 2M beam with axle hole (11:28) 3x 1M bushing 1x 0.5M bushing 1x 2M cross block with axle hole (13:44) Setup: 3M beam 1M bushing 3M beams for ammo 4 large elastics 1 medium elastic 1 small elastic

[@janeklipka1429]

Thanks!!!!!!!!!!!

[@j04279]

Legend

[@jamesdiamond8789]

Amazing thank you

[@kasybasket5980]

I love people like you.

[@TheGamingDuck3]

My wallet is going in the drain after this

[@docsein1]

You're a genius! Making something like this compact enough too look like a pistol, while simultaneously giving it full functionality is what makes this build so difficult. You just got a new sub.

[@prettyepiccat]

You can tell that he used a lot from Still thinking's lego pistol but i must say he did make it look way better

[@ariyehmoskovits3309]

same

[@aname9384]

But Idk which to get the pieces for. Which one you think?

[@brandonhicks5904]

same

[@ithejew4022]

it's easier to make than u think, i've made this 1 alot but i could never figure out how to add a mag and that was like 2 3 years ago when i was 12

[@ThatFFan]

Bully: makes fun of kid for playing with Legos. Kid the next day:

[@UAF16]

Lol I love it!!

[@jonkersjcomers]

Surrender like the French did

[@blackblade6540]

knew there would be at least ONE comment like this

[@ThatFFan]

@@blackblade6540 Hahahahaha

[@mikeuk666]

It is Lego there is no S

[@katsuyuza]

When you don't have enough pieces ;-;

[@nogozoo2582]

When you don’t have the right pieces ;-;

[@suspatukka5447]

@@nogozoo2582 so u dont have enough pieces

[@nogozoo2582]

@@suspatukka5447 I don't have enough of the RIGHT peices

[@suspatukka5447]

@@nogozoo2582 so u dont have enough pieces

[@nogozoo2582]

@@suspatukka5447 yeh sure

[@s-n-g-b1457]

For personal reasons, I will be saving this on one of my playlists

[@MrFanBoyDee]

this is easily the most complex yet most compact mechanism i've ever seen made out of legos. the mechanism and design behind that mag alone earned u my sub

[@Indie1293]

tbh the mag release is probably the most easy part on this build.

[@sovietjams4647]

I love how smart this is, uses a relatively low amount of pieces, looks nice, is relatively simple. I also love how unique it is, especially how you made the center rail for the slide.

[@GABAGOO82311]

Wonderful and yeah I don't have enough pieces but worth a sub!

[@sipsipsippy3340]

init

[@unlimitedgamez7698]

What?

[@leoperez3370]

Same

[@eskendyrackbar1710]

Juice Wrld Is an awesome artist, one of my favorite!

[@sipsipsippy3340]

@@eskendyrackbar1710 100%!

[@stranger986]

that edit with the pieces falling apart was so perfect

[@markalp]

not your pfp

[@shiningpecan6978]

@@markalp not you're either

[@IbelieveinthetriuneGod]

22:37 imagine hearing that sound out a Lego building competition (that would be terrifying)

[@marcosbasbus7031]

*_satisfying_*

[@UnknownZYX_4085]

AND WHEN YOU SEE IT IT’S A .50 CAL LEGO BUILD THAT PENETRATES 100MM STEEL PLAE

[@hunterofdarkness8329]

Sounds badass

[@randsplayz112]

imagine hearing 00:13

[@tudormoise2164]

"I've had enough" *pulls lego glock out of bag*

[@Bennn.E]

Now I wish I hadn’t gotten rid of all my LEGO’s when I was younger

[@laszayar]

Can you please do an inventory of the pieces that you need for this. It would be really appreciated.

[@chrisvking1973]

@Jack Wood i definitely agree, a lego list would be great

[@Airbus_aviation.]

I agree

[@mastermayhem6579]

Please do this.

[@AdrianBeats07]

yes please that would be very helpful

[@raiden_nlarts1934]

Yeah do that please

[@ritawoolstencroft698]

It looks like you can even do a tactical reload with this. Nice job!

[@fallenbounds]

LEGO: "We feed creativity!" This guy: *Makes a functioning gun* LEGO: "Did I stutter?"

[@alexSus-mk7dg]

Like 90%of those pieces are in my robotics class... Guess what I'm going to do

[@mepipe7705]

maybe: buy the missing 10%?

[@GameKnight404]

And finish what that teacher started?

[@alexSus-mk7dg]

Ha, like I have the bajillion dollars that would cost. thanks for the reply tho.

[@alexSus-mk7dg]

@@GameKnight404 ?

[@elmemincontreras9149]

💀💀💀💀💀💀💀💀my robotics teacher dosent let me

[@ferrari4life597]

I robbed McDonalds with this...

[@GameKnight404]

How much did ya get?

[@QuasiGaming-oi5jk]

good luck in jail...

[@Robo8000-z8l]

@@GameKnight40482 chicken nuggets

[@paracode7068]

Funny thing is that the cocking of the gun is basically a perfect replica of the actual gun, minus the shell ejection hole, its very clever!

[@C0S1R]

Ideal build speed + nicely selected background music. You don't often see this :)

[@cserosbence9475]

Very great design! But the part that the shell slides on is a little bendie, if you use a little bit stiffer rubbers itt might jump out of place. If you reinforce it 1 piece instead of 2 it becomes much stronger and it solves the porblem.

[@m1tty247]

The first time anyone has made instructions that are actually easy to follow and have a great mech

[@______xxfunky_space_panda4183]

This is what the quiet kid has in his back pack in preschool

[@crysteriagd2645]

lol

[@gfd1013]

bro fr the quiet kid has a AK47 or Glock19 no but 🍑 quiet kid not big brain🧠 like the grade 5 or the lego class kids or scholar that R bored and k Lego

[@Luminihs]

Wut

[@christopherraymer122]

I actually managed to build this! thx

[@bfsproductionsytp]

Where’d you get the rubber bands?

[@hadifziqri3869]

@@bfsproductionsytp buy one

[@jackfrost3121]

@@MXSVIC Jack frost has come to lend a hand! Hee-Ho! But the way to get these is most likely the official Lego website, they sell just about any kinda of lego piece.

[@CerealAmoeba800]

o shit sans has a gun!!!

[@Benjbroo]

What type of Lego is it

[@QuasiGaming-oi5jk]

Arguably the best thing in the world. Kevin183 doesn't even show tutorials for most of his stuff. here's a sub, you really deserve it.

[@hallwaerd]

This is absolutely incredible. Could you update the description with a list of all the parts needed? Thanks!

[@mahaylasturgeon1748]

yes i would like if you could add the peaces needed shown pls it is a great gun but it would be better if you could add them pls thanks

[@quelldieu7263]

Parts list: 22x 3M blue pins 1x 3M beige pin 10x 1.5M beige pin 2x 3M axle pin with 2M pin 16x 2M black pins 1x blue axle pin 2x beige axle pin 2x 1M axle with ball joint 3x 1M beam with pin (3:57) 1x 9M beam 3x 7M beam 4x 5M beam 5x 3M light grey pin with perpendicular hole (6:33 top) 3x 15M beam 4x 11M beam 5x 3M beam with cross axle 1x 2M beam with cross axle 1x 2M beam with axle hole 4x 2M axle 4x 3M axle 2x 4M axle with stop 2x 5M axle 4x 4x2 L beam 3x 3M pin with stop bush 3x 3M beam with axle hole on top (10:46) 1x 3M beam 4x 1M bushing 6x 0.5M bushing 2x 8 tooth gears 1x 4x6 angular beam (4:37) 2x axle joiner with perpendicular hole (6:48 bottom right) 2x pin joiner (7:26) 1x axle-pin T connector (7:02 top right) 4x 3x11 Technic plate (8:24) 4x 5M thin beam with axle holes at ends (8:55) 2x 7M thin beam Magazine: 3x 3M blue pins 1x 3M beige pin 4x 2M black pins 1x 3M axle pin with 2M pin (11:58) 8x 3M beam with cross axle (11:11) 3x 2M beam with cross axle (11:28) 3x 11M beam 1x 3M beam 1x 5M axle 1x 4M axle 1x 3M axle 1x 2M axle 1x 10M axle 2x 4M axle with stop 2x 2M beam with axle hole (11:28) 3x 1M bushing 1x 0.5M bushing 1x 2M cross block with axle hole (13:44)

[@hallwaerd]

@@quelldieu7263 you're incredible

[@Web_2567]

when you're on a field trip to Denmark but the quiet kid asks to go to the washroom

[@jay-rev]

the brains in some peoples heads……amazing.

[@putin8909]

Not me

[@GameKnight404]

@@putin8909cheers mate I’ll drink to that 🍻 I ain’t got a brain worth nothing in this empty head lol

[@spiderham6353]

Thank you ☺️ it’s always nice when I get help for school projects.

[@BruceWayne-ke8nm]

Finally, an instructions video where it isn't reversed

[@slode1693]

By far the coolest thing I've seen made from Lego!

[@bigbricks1003]

Been doing LEGO for years, and I still can learn a thing or two, thanks man

[@veryangrytomato]

Didn't the old (gray, orange) EV3 Mindstorms set have those 3x11 Tenchnic plates?

[@rndmpinkiepie64]

Parents: "how are you ever going to make money playing with Lego?" Person with this build: *"GIMME YOUR MONEY!"*

[@ARTala88]

Funny

[@Patichu]

Lego ideas is going to have a field day with this submission

[@jamesl9447]

This glock works but the build structure is fragile & also requires specific tension of the rubber bands to make it work. Thanks Alexander P for the parts list

[@raiden_nlarts1934]

What r the parts can you list um please

[@jamesl9447]

@@raiden_nlarts1934the quoted google link was provided by a good person who gave comments here ealier.

[@thedragonofcanada6659]

It may not shoot bullets, but this is a quick reminder to keep your grimey little booger finger off the trigger until you are ready to fire!

[@lopex396]

This is so cool, the second I have the materials for this I’m instantly building this

[@just4funproductions649]

Thank you for posting this. This is the most complex mechanism I've seen. You've earned a sub my dude

[@Zuhaitz912]

Hello, what tipes of rubber bands did you use??

[@rileythesword]

Just a helpful reminder: 1. When the rubber bands are added knowing their size is very confusing and can lead to problems. 2. I noticed the slide seemed to curve up when rubber bands are added, to fix i just used a 4L Axel with stopper at end and put the through the center of the modified 1x3 beam then added a 2L bean with one hole being an axel and other being a circle for pin. Then that put a restraint on the slide to keep it from bulging. 3. I would keep in mind that it seemed very fast paced in the video when showing the parts needed for a step, I get the video shouldn’t be long but at least give us time to pause the video and find the pieces that we need. On a good note this video uses fairly common pieces except for maybe the panels. P.s. Most pieces and sub assemvelies can be made using other pieces with the same amount or better strength. Just remember this is your gun use your imagination with what parts you have! 👋👋😊

[@ElliotSmh]

could you make a more in depth video of the slide mod thing? if you haven’t scrapped the gun yet, or you could just rebuild that mod and i’ll try to figure it out myself.

[@rileythesword]

@@ElliotSmh sure I’ll put a video on my channel

[@ElliotSmh]

oh ye also, do you have a slide lock too?

[@ElliotSmh]

one of the problems i have is that the rubberband which shoots the bullet keeps falling off from the yellow little thing

[@rileythesword]

@@ElliotSmh no slide lock but I’ve been tinkering with that system so maybe i might make on

[@adamv242]

Very nice! A parts list would be awesome.

[@mohamedageed4376]

@Alexander Poirier so u got the list?

[@celtrik]

@@mohamedageed4376 Did u get the list?

[@mohamedageed4376]

@@celtrik nope

[@CommieCat-c6q]

Amazing design, easy to build and troubleshoot. I love the mag release switch!

[@OneOverPi]

This should be turned into an actual lego book.

[@drduck_2726]

i like how your names agent 7 and you watch this vid

[@ab9bninja275]

Hi, really like the design of your gun, the trigger mechanism is very good. Unfortunately I had some trouble with making the gun shoot. I did everything the instruction said and the gun jammed. Turned out that I had put the firing bands in the wrong position. I really like the mag release though sometimes the mag just pops out when loaded. Speaking of the magazine, I like the way that you load the it because you don’t have to push Down the bullets, you can just drop them in. I also had to replace the shooter piece with a 1x1 technic beam because the 1x1 axel piece got stuck on the bullet. I love the way the tutorial is set out, it seems really clear on where to put the pieces. I found it slightly harder to fit the rubber bands as is do not have a small stick.

[@LSCGaming0]

same dude i really cant follow all of it but its really fun to figure it out how a gun works , anyways thanks to the creater

[@GenoLoma]

Very cool.. I will advise that rubber band selection is vital to the accurate function of this item.. My bands were a bit too big, so I had to get creative in how I attached them.. I replaced the front ball-pins with standard grey pins, routed the bands around these and hooked them over a single ball-pin on the underside just forward of the trigger guard (in the grey T-shaped piece to the right-hand side). I also found that by twisting the bands a few times they stay together, and this reduces the chance of them flexing into the barrel and obstructing the projectile.. I moved the hook point for the slide return rubber (first band installed in the video), to the outside of the slide, I put a tan 3/4 pin in the hole in the slide plate directly above the forward trigger cog, this gets the band out of the way (off the yellow half bush) of the action of the firing pin. I also (after breaking the double looped bands of the firing pin) reduced the firing pin to one band, looping it around a single stud tube piece - replaced from the grey bush in the video.. The single band gives better barrel exit speed, and it actually hurts to shoot one's hand in front of the barrel.. it also travels a good 30 feet! This thing could take out an eye now..!

[@prettyepiccat]

hey ive also been having these issues, do you think you could post a short video showing what youve done to it?

[@mohamedageed4376]

Bro wrote the terms and conditions lol

[@TheOneToKeepYouWaiting]

Thank you so much, you’re the only person to show instructions!

[@shadowmicro8919]

Can you post a list of a the Pieces so I can order them

[@shadowmicro8919]

Or make a set or something that we can order

[@blqde264]

@@shadowmicro8919 why? everything is very detailed.

[@LimeyFella]

@@blqde264 So people are just supposed to count amounts of pieces by themselves huh?

[@phoebe_the_dog]

@@LimeyFella yes

[@Prem_hall_713]

@@LimeyFella it took a whole 5 minutes for me to go through the video and collect the pieces.

[@jtg55]

I would actually buy a LEGO Technic Glock. Good for understanding the basic principles of operating a firearm.

[@GeoWalker13]

Very nice work👍 Thank you for this build!

[@JoshuaBurton110213]

Still more reliable than a High Point.

[@sawer]

You can say a lot about Hi-Point, but for the price they are reliable. But imagine carrying something that heavy, bulky and ugly xD.

[@animekid6025]

I like this gun. Not only it is a famous handgun, it is reliable and the mobility reloading plus the small weight just makes it awesome. I built this and at first it is trash but then I improved it and it works perfectly fine! Thanks man for the tutorial. I don't have enough pieces but I use other similar ones to make it cool. I also added some attachments too. Thanks for your tutorial once again.

[@KumaPawha]

"Lego Gun, Pistol, Glock that shoots. " Oh this is quite intreres- *"INSTRUCTIONS"* Ferb, i know what I'M doing today.

[@jacobrentz6409]

yeah now all i need is a list of parts

[@fernandoaxl949]

Give this man a medal

[@UAF16]

A NOBEL MEDAL

[@BurgerSoda]

Lego: “lets build children’s creativity!” Yoshiny: GLOCK 19

[@klaxified1008]

when your halfway into it then you realize you dont have enough pieces and you wasted soo much time of your life to make a lego pistol

[@redlabs1392]

The best pistol that I ever seen out of lego !

[@narutouchihaa]

Are these Lego pieces specially designed for making pistol?

[@josiahtitus]

Just normal technic

[@TMC815]

I'm a 34 year old man. I ordered all these pieces off webrick just to build this. Soo cool

[@inv_vision]

This Is so insane, i did Build it and yeah the shooting mechanism can still be improved but designing this Kind of mechanism must have been very difficult already. So thanks a lot for sharing

[@j04279]

Can u help me with the pices i dont really know where to buy them

[@lukearts2954]

Although completely against Lego policy (and thus they will not be happy that you used their brand name in the title of your video), it's a great build with elegant solutions without compromising on structural integrity. Well done.

[@Th_Uslss_Indvdl]

Imagine going to rob a guy and he whips this out

[@Wolfrich666]

i would probably be scared i dont want a Lego piece stuck in my nose or hitting me in the eye ;A;

[@justanormalbaconyt5093]

No just imagine the bullets are modified to be spiky but also not shoot very far so they just drop to the ground, then the robber thinks it’s not a big deal, but then he *steps on the legos*

[@INKVIXO]

Hey You can make a mini version of these gun? Pls because i have a 2 pieces What did you use to cover the trigger mechanism (part 8:23 of the video) could you? I would appreciate!

[@The_Original_Rtxyz]

Works very flawlessly i didnt have some pieces and since i have 3 years of playing with legos i was able to make my own mods to it so i could have it work for my size, note if you dont have the top piece the small thing just use the bigger version of that because thats what i did. it is a little big then but still better than nothing. Very good tho.

[@PUNCHEDPUNCHEDPUNCHED]

I like how the usual overlap with these Legos are people who like making cars and then there's the Lego and gun overlap demographic

[@lukaekar2289]

I would apriciate a list of parts that you need but otherwise a great chalenge to try out and great video

[@blyatmanmike1816]

Because this is so small, the potential to modify this gun into any other gun is massive!

[@emmadavies8117]

me: eat my studs bang bang mom: put your lego pistol away at the table

[@bluemulletknex]

Gun looks great and so does the video. Great work!

[@lizclinton8434]

My son has built this but the two rubber bands looped together keep sliding out and not staying in the gun. It slips past the one studs that should keep it in place. Any advice?

[@jayeshv.a3622]

it happens to me also. did you use lego bands?

[@Manface6996]

Roawr

[@mrwyyeet]

Lego should really make gun sets that are just like this

[@josefadam7578]

Nice gun! Very cool! Great work.

[@rumpelstiltskin2602]

that is a video i was looking for for a long long time, thank you

[@kaanmutluerkaya8905]

Now this is real firearms.

[@kublenator]

is there a parts list? if so plz make a parts list cuz its hard to find all the parts

[@NormansCyclingLifeChannel]

Although I don't like gun, I found it very interesting to build it following your video. As such, I spent the whole afternoon and built this gun using Bricklink Studio 2.0 so that I can share the build instruction and parts list with friends.

[@noechaillet382]

Can u share it with me?

[@tew3]

share?

[@ryanking1923]

So where’s it at

[@tew3]

@@ryanking1923 someone posted a google sheets links to the list its somewhere in the comments

[@LPVPH]

next time can you show us what Lego pieces we need and how many??

[@Mr_marine96]

The moment you realize you don’t have enough prices :(

[@Auhryofficial5884]

Nice lego creations for kids to fight an robbery at home when they alone at home

[@nintendope8837]

This was in my recommended.. that sums u what kind of person I am

[@richwy]

Is there a PDF building manual for this available somewhere? Especially since it is very laborious to enter the part list into bricklink.

[@jestiction]

I love the design! I would really like to see a video on how to make the AAC honey badger (if possible)

[@gjsfgjsdfrgjr]

That’s prob 1k usd worth of legos lol

[@BoozyBeggar]

Alright, lego, you had a fan do all the legwork for you, now SELL THE SET! Also give this guy some money.

[@BoozyBeggar]

Also I'd like an extended magazine, capable of holding enough lego rounds to get me the death penalty in California for even thinking about it.

[@Headgasket-]

What pack do you recommend that comes with all these parts?

[@nikitaretuntsev2485]

It takes a lot of kits to have all these parts. But it's better to order lego parts from the site.

[@Headgasket-]

@@nikitaretuntsev2485 ok thanks!

[@k1ng.1732]

Doms charger has all the parts

[@cnlei001]

@@k1ng.1732 what is Doms charger BTW?

[@k1ng.1732]

@@cnlei001 its a car from fast and furious

[@Calthecool]

Shoots harder than I thought.

[@the_real_kevin8996]

wow this is amazing! my classmates didnt stand a chance.

[@OsrsNooby]

If you bring this to school it could be national news when a teacher inevitably takes it away from you thinking it's a real gun lmao.

[@Great_TOAST]

My only question, can we make the barrel longer?

[@alexeecs]

Here is the xml parts list. Credit to Timmy for posting the original comment with this list. I made some changes because the original list had a few mistakes. I also changed the colors for some and require the 4 panels to be new since it's the most important to the appearance. If you want it to be cheaper you can edit the new requirement and colors. In particular, I changed most pieces to black and some to dark gray to make the gun look sleek, and the bullets to silver. But silver pieces and certain black pins are expensive so you can change, for example, the 3L pins with friction to blue. Also I recommend you verify this list with the video first. It's the worst when you realize you're missing just one piece and now have to pay another $10 to ship one piece. P 40490 11 -1.0000 1 X N P 6629 11 -1.0000 1 X N P 3749 9 -1.0000 2 X N P 3705 11 -1.0000 1 X N P 3737 11 -1.0000 1 X N P 32291 11 -1.0000 1 X N P 2736 86 -1.0000 2 X N P 32278 11 -1.0000 3 X N P 32524 11 -1.0000 3 X N P 15100 11 -1.0000 3 X N P 10928 85 -1.0000 2 X N P 62462 86 -1.0000 2 X N P 32065 11 -1.0000 2 X N P 32034 11 -1.0000 2 X N P 32556 86 -1.0000 2 X N P 32002 85 -1.0000 10 X N P 32054 11 -1.0000 3 X N P 43093 7 -1.0000 1 X N P 32316 11 -1.0000 4 X N P 87082 11 -1.0000 5 X N P 6536 11 -1.0000 4 X N P 60483 11 -1.0000 4 X N P 32073 86 -1.0000 3 X N P 32140 11 -1.0000 4 X N P 11214 85 -1.0000 3 X N P 63869 11 -1.0000 3 X N P 32034 86 -1.0000 3 X N P 32013 11 -1.0000 1 X N P 11478 11 -1.0000 4 X N P 32523 67 -1.0000 5 X N P 6558 11 -1.0000 25 X N P 2780 11 -1.0000 20 X N P 42003 11 -1.0000 10 X N P 32525 11 -1.0000 9 X N P 32062 11 -1.0000 5 X N P 4519 86 -1.0000 6 X N P 87083 85 -1.0000 4 X N P 32523 11 -1.0000 4 X N P 3713 11 -1.0000 8 X N P 4265c 86 -1.0000 7 X N P 15458 11 -1.0000 4 N N

[@killhha]

The real MVP. Can I import this into a website and purchase just these pieces alone? I'm in the EU

[@alexeecs]

@@killhha I exported this from Bricklink, so it should work to reimport it to there.

[@drblock21]

Why is it all just a huge line of code

[@alexeecs]

@@drblock21 That's what bricklink understands

[@Sunnycyde]

Great design, so much fun to play with!

[@cheesesauceofdoom4333]

I made the predecessor to this, it functions the exact same, I've modded it myself (longer barrel for accuracy, extended mag, etc) it's just not as visbly appealing

[@dylanwins9190]

Do an inventory at the start or finish please

[@ángelrollánrojo]

Que lastima que la corredera no se eche hacia atrás al apretar el gatillo... Pero aún así, un trabajo muy bueno, mis felicitaciones

[@kylewhelehon4469]

when he pulled out that tooth pick, you already know things just got real

[@valentinraess]

I built it and it is incredible! Tip: use two rubber bands to shoot the little piece. it will be stronger. Best tutorial i have ever seen!

[@noahburgos9625]

yeah i thought that while watching this

[@noahburgos9625]

try this one i found kzbin.info/www/bejne/moLaZapvjMyLmbM

[@salomeraess5112]

@@noahburgos9625 Nooo you got me!

[@GameKnight404]

I saw this and immediately broke down laughing just repeating the phrase “of course this exists” for like 1 minute straight. Now I’m just watching this and enjoying the construction process.

[@LMAgri]

Let's go ! I'll try to build, even if I'm not sure if I have enough pieces 😆

[@Gaming_Badger]

This man will make a AA gun in his backyard using legos

[@okboing]

Woulda been nice to get an idea of what pieces and how many I would need, cause I don't have four of those panels used about 9-10 mins in, i only have two besides the ones that are already in a build

[@II_Faither]

When you want a gun but you only have lego be like:

[@gabrieltreanor2627]

Looks really cool just got the pieces for it. What rubber bands did you use

[@navezo]

Any! At least its strong:D

[@dashlivee]

Where’d you get the pieces ?and do you have a list ?

[@gabrieltreanor2627]

@@dashlivee I ordered the specific pieces of BrickLink and I also have screenshot of a list of the parts

[@niteclose]

Doesn’t work . Modded it to fix and still the bullets fall out feeling like I missed something

[@Jadethefunny]

U missed something