Lego Saw vs Household Objects! (Carnage) Brushless RC Motor

[@8bitarmory846]

a reminder that it's cruel to declaw your saw, as it can't defend itself or hunt in the wild

[@owensbricktest]

😂

[@Canadiannative]

And don’t remove the wires, it can’t power that way, almost killing it

[@JOEDAJERBOA]

also do not debark your saw, as it would suffer not having a way to communicate.

[@TheMush26]

4:15 no that is 😩

[@Conessay]

This is so inhumane, the saw is helpless now!

[@Thekitty0706fan]

Reminds me of when i jokingly used a cardboard piece with sawblade printing on it (came with a ryobi saw to show how the actual sawblade should sit) against a piece of wood and it actually cut into it about 8mm. Never underestimate the cutting power of non-metalic objects, all they need is the RPM and they can do some damage.

[@fiend_gaming]

My teacher in shop demonstrated the danger of power tools by cutting a carrot in half with a paper saw blade like you mention, but he mad his of construction paper. Scary demonstration

[@Piano_Board]

R.I.P. blade 2024-2024

[@nicolastanoe]

😂

[@Phill-fw6or]

Beru😂😂😂😂

[@Dudeface167]

R.I.P.saw

[@DiloMinokio]

For real😔

[@stockicide]

You now have a one-of-a-kind custom saw piece.

[@Metal-Sonic]

I saw someone attempt breaking the sound barrier using a dozen lego motors made to spin faster by gearing, if you do the gearing tactic with THIS motor, i think it could work

[@thetoasterisonfire2080]

I would actually choose to gear down the motor, its got plenty of speed but is lacking in the tourqe department. If they also used a sensored outrunner type motor instead of inrunner along with a programable ESC it would solve the lack of tourqe.

[@Metal-Sonic]

@thetoasterisonfire2080 yeah you could increase the torque but lower the speed and then do the other way around so it becomes a sweet spot in the middle, or vice-versa

[@YurBoyChubs]

no way you're getting to 1207km/h with legos 😂

[@Metal-Sonic]

@@YurBoyChubs i mean that rc motor does already have a 100,000 rpm max on it so if you give it a stupidly high gear ratio it could theoretically be possible

[@13thbee16]

FYI gloves (and other articles of clothing) can actually be a safety issue with rotary stuff. They can get snagged and pulled in in an instant much like that plastic was, except your hand is in there. The result is really nasty crushing and mangling. It's often safer overall to just accept the risk of getting cut. Now whether the stuff you're doing is powerful enough to really cause problems I can't personally say, but it's something to be aware of.

[@VergilTheLegendaryDarkSlayer]

That's what a pushstick is for In this instance, tongs while holding a face shield in front of the contraption

[@TGFMusic]

Dude it’s a piece of fucking plastic. This isn’t a circular saw made of metal. The glove here is totally fine. There is NO WHERE near enough torque on that little motor to do anything serious other than the plastic pieces breaking off.

[@Ebb_and_Flow]

Ugh, the horrible lathe accidents they made us watch in machine class... keep your hair up, and your sleeves short.

[@VergilTheLegendaryDarkSlayer]

@Ebb_and_Flow I remember watching degloving accidents from wearing rings Ever since then I refuse to wear rings

[@Slink3s]

0:17 ohhh that sound is the best😩

[@itz_lexiii_]

wish i was rich enough for that still on Spektrum hardware 😔

[@randomstimulation4584]

Next: Try making new stronger blades with 2 or 3 layers of folded paper or aluminium foil to see what it can cut!

[@randomstimulation4584]

Also try cutting vegetables like carrots, would be cool to see what happens!

[@surensaakianyisik]

use a dremel ultra saw blade

[@Wreckedftfoxy]

you need steel, aluminium foil would be be shreaded

[@gregbaird1338]

Wow, now this was another cool video, perhaps in the next one, you could have a camera looking over the shoulder of the operator to see what he sees that would be cool, especially with little bits of stuff flying at the window.😂😂

[@KJDevine]

Love your vids, keep up the great content 😄

[@deon5729]

the wood did what i expected to happen with that saw

[@DominicPROTASer]

I guess this is what emmet does in his free time

[@arandomhobbychannel6718]

What a cool experiment!! I have a castle sidewinder 8th in my traxxas slash 4x4. Those castle motors man they are fantastic!

[@TheTrueBobDole]

So Lego James Bond will have nothing to worry about. 😅

[@smartlegopower777]

I really like this invention. I didn't expect it could cut wood

[@Vok250]

Would be very interested to know what adapter you used to connect hobby grade hardware to lego. Always wanted to RCify my McLaren F1 set.

[@owensbricktest]

It’s a 5mm to 5mm shaft adapter. The lego axle sits just slightly lose, so one wrap of tape or foil keeps it centred.

[@RF24Nicowillams]

0:53 reminds me of the dentist SAWING MY TOOTH

[@sanakassara]

At the ER. -How'd you said you lost your fingers again? -Lego.

[@RonCruse-fc4to]

yoo cool video you can use it to defend your self 👍👍

[@ElSandwich777]

Man this would clean up on Lego Battlebots.

[@Blendercatalyst]

try test this with actual lego motors, use gear ratios to help.

[@owensbricktest]

Someone did that with 20+ lego motors.

[@Blendercatalyst]

@@owensbricktest imma try find the vid

[@DustyVideo11]

Yeah I saw that one once

[@samuelvrecko-e1l]

it was so fast that the cardboard was mashed potatos

[@ChanNapha-h6c]

Best vid, keep it up

[@tvwizard369]

You should include a hot dog as an example of what it could do to a finger 😂

[@DustyVideo11]

keep up the good work!

[@IcyHotTrain]

Next time try running some water on the blade while it cuts thte wood to see if you can keep from melting it.

[@brimp4989]

The plastic would still probably melt before the water could cool it fast enough.

[@eXenSer2011]

0:01 - blade 5:11 - a wheel

[@MichaelLovett-g1x]

You going burn that motor up 😂

[@hendrikgrewe8122]

The shape of the Lego Sawblade is VERY BAD for actually cutting things, if it was shaped like an actual Sawblade it would cut stuff way better.

[@jingxu9871]

What is a sawvlade?💀💀💀

[@hendrikgrewe8122]

@@jingxu9871 Nothing, you can't prove anything.

[@Jgamer2iscool]

You should try that but with a ballistic hand

[@HalilDuran-j5s]

Bro Really said:🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝

[@dfto13]

Забавно наблюдать, как брусок пилит диск.

[@Reptigamer565]

i have the EXACT same motor, lipo and speed controller in my traxxas slash😂😂

[@owensbricktest]

Haha it’s a solid setup!! This one also spent a few years in a slash

[@Gamemoble27]

1:37 me in a racing trake

[@markolysynchuk5264]

That blade worked on wood the other way around

[@bonlappen3000]

There's small sawblades in hardened steel you could use

[@CountryXpro]

Make a power drill !

[@eddiewhistler7472]

2:25 Sad face

[@Smrditibracha]

can you make an lego vacuum i4 engine whit tutorial like this + all parts needed

[@jon6039]

Um I hope you were wearing safety glasses

[@Account-i1b]

0:54 EEEEEEEEEEEEERGYEEEEE

[@Aviation849]

Idea add a faster gear ratio and the speed controller can to 6s

[@marcocisafrulli3623]

You could add some gears to have more torque

[@demirbey8068]

3 Words: Increase Gear Ratio

[@iCantThinkOfaName3]

A speedy bear ratio would fail, but a torque gear ratio would make it cut more precisely but slower

[@demirbey8068]

@@iCantThinkOfaName3 So you say even a 1:1.33 ratio would fail, right?

[@owensbricktest]

The problem isn’t the power of the motor. If I added gears, they would need to be on axles and at this speed lego axles melt in seconds.

[@iCantThinkOfaName3]

@@demirbey8068 yes. At that speed a 33% increase is at least more than 6000rpm

[@nitroboom1282]

@@owensbricktesthey so apparently there’s a store called green gecko or something and they sell aluminium beams with ball bearings and metal gears and axles

[@jurandas00]

Please make a hydraulic press!

[@Liam-d9i]

How is it not causing a sonic boom

[@marluna_x]

I think the blade was too high, for best results, place the axle at the height of the table.

[@Harald.]

No. When lowering the blade, the blade needs to fight more friction after cutting the material. The blade should be mounted a little higher, to reduce friction between the blade and the material already cut.

[@travisbrodie655]

Use a 3D printed one

[@Jack-df4mk]

Try making a plane😂😂😂😂😂

[@KOBAN291]

Бро до последнего не хотел включать 70 мощность

[@test-rj2vl]

3:13 if you look at frame by frame you will see that the blade turns the wrong way. No wonder it did not even try to cut.

[@royhuff7772]

Microplastics are gunna take over

[@Sam-Jay-Electronics8447lol]

I have that motor on my traxxes rc drag car

[@liamconway9281]

Try sharpening the blade

[@darkpanda3141]

umm aren't u supposed to use the saw the other way why are u using it backwards?

[@Eclipse49TT]

No it’s not backwards because if you had it the other way the board or what ever your cutting will probably go uppppp

[@13thbee16]

No, that's the way saws are meant to be used. They kinda work by taking lots of little scoops of the material.

[@toobcat24]

Saws have to turn the direction that pushes the object in question into the surface.

[@Eclipse49TT]

@ I knew it

[@Hoolahups]

Have you ever used an actual circular saw or seen one being used?

[@TheYarikishere]

funny motor sound in 2:14

[@MarijaStepic-nr1fy]

Wow

[@pronin_maks_mx]

А как называется мотор

[@davidpage3893]

This saw would be very useful for cutting balsa wood for building model airplanes.

[@curtisnewton895]

lol, lose the gloves, come on

[@LostInPhilly89]

4:15 *it's #grammarfail

[@itz_lexiii_]

bros lego saw has a better motor than my $500 RC car 😭

[@JunkCircle75]

Sell me one

[@A10andgau8]

Bruh my Gatling gun has more rate of fire then your Lego gears could ever have (no offense)

[@XxTGIFxX]

The blade is on backwards, it would work better if you flipped it around

[@ngiallag2792]

In my mind the Lego figure on the controls should be a bond villain, and James bond Lego character should be heading towards the blades of the saw and some sinister background music 😂

[@TommyRobertSings]

Sharpen your blade damn it... lmao for real tho. U should try to sharpen the blades see if that actually helps. Lol