Process of Road Bike Wheels Mass Production / 公路車碳纖維輪組量產 - Taiwan Bike Wheel System Factory

[@yuhdar]

鑫元鴻的輪組以前很超值，很耐用，早期用在捷安特廠車輪組上，我老車上還有一組用到現在。原來鑫元鴻從輪框、鋼絲都自己生產，大部份鋼絲都用協達或是DT，花鼓鑫元鴻也都自家的，不是用昆騰或是喬紳，怎麼一點錢都不留給別人賺 XD。國產就給讚啦！

[@Pedalandoempinheiros]

@@yuhdar como eu fasso para trabalhar com vocês

[@4883fred]

Formula碟煞也是鑫元鴻的品牌，非常超值

[@munkymunk]

I think a lot of people have ridden Formula wheels and hubs without ever knowing it. Great company.

[@Minwary]

These are not Formulas

[@Eseckiels]

@@Minwaryit’s says it right at the beginning that it’s the formula company

[@AnotherMrLizard]

Most cheap bikes that have unbranded hubs are formula. Never see them otherwise in the higher end, with a cheap rim and a cheap hub I don’t know why they’re 1500.

[@Jean-jk4zv]

@@AnotherMrLizardand you can see them applying a layer of carbon onto the al rim… what a scam

[@itsjustpizza]

@@Jean-jk4zv Better call HED and tell them they're scamming people lol

[@詹姆斯影像工作室]

看製造過程會讓人想買，好的碳輪輪一直都是騎車人的夢幻逸品。

[@kislovdmitriy]

Это не карбоновые обода. Это алюминиевые + плёнка.

[@LFY621632]

@@kislovdmitriy識嘢！講人話即係唔係收錢寫手

[@johndoyle4723]

Beautiful production line, these wheels are made with such care and pride, no wonder they are so expensive.

[@aderbalnunesm]

Impressed by how manual the process is. Especially the carbon wheel.

[@robinbantigny8640]

Hence the justified high price

[@metricstormtrooper]

Fake carbon wheel.

[@l.k.1011]

@@metricstormtrooperMy first thought as well.

[@benturp3492]

Those rims did not look like high price ones 😂​@robinbantigny8640

[@saikat0511]

​@@benturp3492yeah it looks fake without all the obnoxious branding

[@mgjk]

so much pride in manufacturing, great work.

[@ysh258]

알루휠 만들다 카본원사가 왜 나오나 했더니 저렇게 만드는구나 갓구운 카본휠 맛있겠다

[@bobdebouwer7835]

I hope the workers are safe. I see a lot of gloves that can be caught up and pull hands in the machine.

[@szczuraki]

Zobacz sobie ja wyląda produkcja w indiach😢

[@kitahii]

今では台湾製自転車部品は高級品だからなあ。それでもイタリアやフランス、アメリカ製よりは安いけど。 自分が使っている物も日本メーカーのマレーシア工場製か台湾メーカーばかり（中国製のパチ物は怖くて使えない）

[@LifeWithChappie]

え？アルミリムにカーボンファイバー貼ったなんちゃってカーボンホイールってこと？それでもまぁ工程とても興味深かった！

[@ぱよ-p2c]

アルミの型にカーボンテープを貼り窯で焼いて成形しアルミの型を外します。

[@にんにくむつり]

台湾好きです。ありがとうございます。

[@joro8604]

And i thought some of my rides were monotomous. I have a new apprecition on so many levels.

[@健一郎平山-p5w]

這是一個好工廠

[@yoonkunlee5885]

훌륭하네요

[@oov55]

Quality production, patience and care. I knew if couldn't be Mainland China - because there would be spitting, filthy conditions, poor quality, waste and out-of-date machinery. Obviously this was Taiwan: efficient, civil, skilled, honest, quality. Two entirely different countries, two different nations.

[@김준기-s8z]

대단하네요 타이완의 자전거 기술력은 역시 세계최고입니다❤

[@lemon_films]

감사해요🥰

[@권용대-b5v]

Fascinating! It was a good study to make me further appreciate my bikes :)

[@keitang9274]

原來是公路車 看到一半就發現這東西不簡單 當然價格也非常不簡單...

[@blacklabel810]

曲老闆聽著， 我見過的最好的自行車車輪製作， 非常最大和最好的結果,,,👍

[@lotus4405]

모든 공정이 수작업이군요. 역시 세계최고자전거 강국답습니다. 저는 Giant Propel, Design, 구름성, 심미성, 조향성 등등 최곱니다. 앞으로도 가성비 자전거 부탁드립니다. 합장 🙏

[@user-mvyWHEiBOOvh6zSv2sdKCAE7U]

隱形冠軍 經濟火車頭 world number one

[@Totalrepairsolution]

Excellent work ❤👍🤝

[@TonyBlackgrave]

As a wheel builder its cool to see how the things i work with are made

[@たそ女臣]

職人の経験や勘、その日の気分や天候で出来に差が出るホイールよりもこういう設備が整った工場で量産されるホイールの方を信頼しています

[@inzana2]

Impressive operation

[@potsang6316]

療癒！讓人目不轉睛默默地看完了~

[@SNYKEMAN]

Je ne vois aucune différence avec la production occidentale ! 👌👍🏻

[@wolfgangtatzel3706]

😊 Vielen Danf fürs Hochladen - bin Maschinenbaumeister und Fahrradfahrer - das Bike gefällt mir sehr. 😊

[@lemon_films]

Thank you🥰

[@WaldeciGomesMEC_DIESEL]

Nível superior ❤

[@user-G23RTkzKok]

Класс! Производство на высшем уровне 👍

[@edsontadashiyamashita3262]

Comprei uma Caloi, marca brasileira de bicicleta com cambio Micro Shift e parece ser de Taiwan. Que bom que Taiwan fabrica coisas boas. Belo vídeo. Abraços a todos.

[@DerbederBiri]

Bravo harika Türkiye den selamlar saygılar sunarım 🎉

[@Nepbor]

Good video, I like since the begining until the final and the keep in details in all the process of manufacturing. Greetings from Peru - Southamerica (march 22, 2024) 🇵🇪😉👍🏻

[@ハタボー-z6y]

Xero の １０Sホイール昔使ってました！

[@LFY621632]

所以才變了「以前」😂

[@shaji1770]

Professional approach to the beautiful cycling world of Thaivan

[@InstructiveTools]

You see very interesting things here. These things open your mind and many ideas come to you.

[@jpkinjp6769]

原來是XERO 以前用過 鋁邊碳刀 不錯 .

[@eloimumford5247]

Champion ! Give the taste to own this bike . Have a nice 2024.

[@TakWahCHIU-ho2eu]

如能大量平宜就好，好有興趣租用-一試。😂

[@angelruedalocagonzalezgonz151]

fantastico video muy bueno. gracias

[@cegalleta]

interesting to see how carbon wheels are actually more of a hassle to make, and how wheels are actually kind of hand-made. I had in my mind a 100% automated process for some reason.

[@MadChalet]

Are they carbon wheels? It looked like a wrap put onto aluminum rims, no? Check 4:29

[@cegalleta]

@@MadChalet I thought it was a mold, never had seen hybrid carbon-aluminum wheels marketed as such before. It could potentially be dangerous if that's the case tbh, because of galvanic corrosion

[@Fr3dr1k]

@@MadChalet How to make a perfect rim with leaves?? Well you need a mold... here in aluminum, which then goes in the oven. Everything is in pictures... a minimum of reflection

[@Rose.Of.Hizaki]

I wonder if the staff at the manual calibration part of the line have a target of a certain number of wheels they have to get through per shift? Since calibration is the final step in manufacturing, I hope the staff I given time to fine tune all the wheels to the correct spoke tensions.

[@fanda6122]

almost certainly, i know when they make frames for pro teams they make sure to use the best most experienced workers in the factory and there's no time constraints but what consumers get is the rushed time crunch version

[@itsjustpizza]

They definitely don't. Nearly every single brand new wheel requires at least a minimum amount of truing and bearing adjustment before being sold.

[@JoehnDoue]

evidence?@@itsjustpizza

[@itsjustpizza]

@@JoehnDoue my fingers, a truing stand, my eyes lol. Formula has been around for many years, but this is pretty standard for (as I said) pretty much all wheels. Next time you're in your LBS probe their brains a little bit. These mass produced wheels especially need checked before they go out the door. Not doing so is an amateur move idc how much they cost.

[@JoehnDoue]

ok@@itsjustpizza

[@士永鄭]

鑫元鴻讚

[@c2thew]

That scott time trial bike at the end was beautiful

[@dj5fs233]

見た目はカーボン、中身はアルミ？

[@doohan50000]

카본으로만 휠을 만들면 바퀴 림이 버티질 못합니다 작은 충격으로도 깨지게 됩니다 공기저항이 적은 바퀴라고 생각하시면 됩니다 자동차 카본바퀴도 동일합니다

[@VoBen-io7vd]

rất tuyệt vời 💯

[@henribarras8469]

L’Asie usines du monde

[@michaelsun9063]

我偏好shimano的輪組，連碳纖維輪組都是shimano，儘管在重量上沒什麼優勢，但是可靠耐用。

[@ssnoc]

Tremendous amount of hand work is surprising.

[@HeadPack]

Good to see this. More and more Chinese wheel sets are receiving good reviews. Customer service abroad is still mostly unavailable though. The carbon wheels look very similar to the Shimano Ultegra carbon wheels.

[@eXTreemator]

another genius chinesium buyer

[@HeadPack]

@@eXTreemator What's your point? Most wheels are made in China, just some are rebranded and sold with an extra markup.

[@許大-x2m]

認真工作啊，百萬印工要來了😂

[@Riceman-o1p]

OK I promise to no longer complain about the cost of a new set of wheels.

[@후치애플-j8g]

와 멋지네요~

[@jorgeandrade2168]

They are made of aluminium covered with a carbon film, which is why they are cheaper than full carbon.

[@johnhenrick2298]

Thank you. I was wondering why the aluminum rims and then the carbon fiber.

[@markifi]

i don't think that's right

[@quoccuonghua]

Very good very good very good ❤

[@JamesSmith-qs4hx]

That was a wheely good video.😐

[@lemon_films]

Thank you🥰

[@JamesSmith-qs4hx]

@@lemon_films based 🙏

[@sayedhassan6322]

سبحان الله وبحمده سبحان الله العظيم ❤

[@doohan50000]

멋있다~

[@yuto-2-zw]

Ništa bez indijske ulicne manufakture..❤

[@kvevnwang8902]

以前曾在做碳纖輪圈的小工廠工作，只能說差好多，自動化機器做出來的速度跟製程，以前工廠做的八成都是手工，根本比不上

[@ebhkkc1]

Yep, specialized places a sticker on, marks it up 100%, and calls it a day.

[@kameneka]

Keşke ben de o fabrikada çalışsaydım

[@frankschmitz3341]

Fantastisch ❤ bin selber Fahrrad Händler aus Deutschland.

[@andy1414liu]

當你在開趴語音控製要喊過你的音響，智能有時候很好用有時候後也會讓你冒煙

[@user-bigkonlong]

那個調輪子的好厲害！

[@escgoogle3865]

Mr Video Editor you need a redo regarding how the mold works in carbon rim manufacturing.

[@permanenceinchange2326]

The carbon you see is pre-impregnated with resin and harder. this is stored at low temperatures, so it doesn't cure. The fabric is cut at 45 degrees, and then 2 layers are pressed together (or maybe more). When the layers are put in the mold, a plastic bag is put in, this is used to push the layers against the walls of the mold using air pressure. In the oven, the resin gets cured. (now you know this, watch again... you can see every step)

[@Pedalandoempinheiros]

Eu gostaria de poder trabalhar nesta Empresa maravilhosa

[@dalegreenaway]

Just incredible! Thanks for uploading.

[@lemon_films]

Thank you🥰

[@井実芳仁]

産業革命は偉大だ

[@silverxia497]

I saw a very crucial step！

[@parnuzutech]

Nice work.....

[@passqua]

Wow this is a work of art. Very nice

[@TL243]

😎❤️🇹🇼‼️the bicycle kingdom!!!

[@PillemannOtze-n9c]

I long for the steel italian handmade frames of the seventies

[@JeffAQdayo]

查了一下價格，感覺不錯耶，還用CS培零

[@금별불]

무척 신선하고 도움이 되는 영상입니다.

[@NanashiCAST]

wow that's a lot of precision tech

[@dylan-5287]

Very cool to see. Hubs on my mtb are formula and wouldn't be surprised if so are the wtb rims.

[@andreyrozodominguez8050]

Wow hermosas❤

[@abdellahzaidi1257]

عجيب جدا. صناعة رائعة فوق الخيال 🌴🌴🌸🌸

[@Kutarbear]

46000台幣阿 好貴但厲害

[@Jonwin121]

Hi I like your work

[@zhchoe469]

Carbon wheels, aluminum at the root. Thank you.

[@paisfr]

Super ! ❤⭐⭐⭐⭐⭐⭐🌹🙏☀️💐

[@alain0219]

原來碳纖維輪組的框,還是有個鋁框做基底!

[@andrewwarcup684]

That's the impression I got, as there was no reference to it been removed.

[@zhoujack662]

那只是為了貼碳布方便做成型使用，拿進去烤箱時就會拿起來

[@lovedrinkbeer]

I think the first aluminum alloy rim and the later carbon rim are different products.

[@ot1560]

@@zhoujack662 可是製程中還在那個鋁框上雷射蝕刻產品編號，而且影片一開始就是產線上大量製造鋁框，怎麼看都是輪組的一部分

[@petehotoff3715]

Super stuff ❤

[@stefanreimund7630]

Interesting 👍

[@israeldavalos2351]

Saludos desde México 😊 Buen video

[@lemon_films]

¡Gracias!🥰

[@ManufacturingProcess98]

High quality wheels

[@francisperez9205]

Me encanto, muy buen contenido 👍

[@lemon_films]

Gracias🥰

[@jarpen3]

Good job ❤

[@Vincent_Langlois_Carbone0]

C’est la fabrication de roues aluminium recouvert de carbone que nous voyons ?

[@힐링라이딩]

자덕으로써,좋은경험했습니다.휠생산공정도 손이많이가는군요.

[@sconni1354]

Beautyful

[@marcosantoniopereira2054]

Excelente 😮😮😮😮

[@zhongdasun8772]

tension testing 是应力释放么？

[@FiveTech6368]

What amazing technology

[@eugeniosouza6633]

Very good! 👏👏👏👏

[@JangBiReview]

카본휠 제작때 보니까 안에 알루미늄이 들어가고 위에 카본을 입히네요!? 잘못본건가 했는데 다시봐도 그렇네요

[@pironi2405]

Wow👌👍