Hi-End Floor Standing Speaker Production Process / 落地揚聲器製作過程 (音響製造) - Taiwan Speaker Factory

[@kenandbarbie-b6c]

Primarily handmade, even the speaker driver. Thumbs up to this Taiwanese manufacturer.

[@bertroost1675]

I hope they reply to questions and/or requests for help with their products via email. Their mainland brothers are very lacking in aftermarket service and help.

[@kenandbarbie-b6c]

@@bertroost1675One other point- they are not using political prisoners as slave labor to lower cost.

[@bertroost1675]

@@kenandbarbie-b6c I am friends with an audio manufacturer in China and he doesn't use slave labor.

[@kenandbarbie-b6c]

@@bertroost1675I know that and do not mean everyone there is doing that. Most likely they do not, but some CCP partnered operations do. This is outlawed in Taiwan. Some mainland Chinese companies like Fosi Audio is doing a great job on budget amps sporting Texas Instruments ICs & quality supporting parts. I am selective in what & who I purchase things from CCP China. I have no such reservation with Taiwan at this time.

[@ซะรีแซ่ฮ้อ]

คงแพงมาก ซิครับในไทยน่าเข้ามาไหมครับ

[@西門城]

臺灣之光！！！USHER 品質很棒的牌子~我的S-520桌上型喇叭用了快十年！！！音質太棒了👍👍👍

[@ajay30572]

Usher 是我人生的第一組音箱，到現在快30年了，依舊工作正常！ 為認真的台灣作品鼓掌！🎉

[@陳孟華-k8i]

我也是❤ 品質真不錯，耐用👍👍👍

[@ВалерийПапруга-т2щ]

Очень приятно смотреть на процесс сборки 🙂👍

[@Alex23092709]

Особенно в момент 13:42, когда коннектор впихивается под клемму, а не надевается на клемму. И так там всё. Фигли, ручная сборка. И ещё интересно, медная-ли там "медь" - не показали момент припаивания катушек, вполне может быть обычный крашеный алюминий.

[@chauo8986]

Lao động việt nam rồi thấy cách làm là biết ẩu tả rồi

[@moehieb]

Amazing... the best qualitys Made of Taiwan...so beautiful.. enjoy your music with Usher...❤❤...15:12.

[@bertroost1675]

They learned it from Japan.

[@chloeleedow7250]

Taiwan is the the leader of so many hi end silicone chips and stuff now, they have tech the rest of the world depend on, the chip shortage the has affected the world a couple of years ago was all because of a fire somewhere in Taiwan from memory. Not to get political either but Taiwan must be protected from China if it comes down to it. This little country is amazing and deserves the world's support to ensure its freedom continues. ❤️

[@rgseven6557]

@@chloeleedow7250 So true man. If I am not wrong, well known brands like Asus, MSI and Nvidia are from Taiwan? I also notice their electronics are of top notch quality.

[@Bill_Bacon]

I was expecting the music from Hellraiser, but I do like the sounds of cnc machinery in the morning. God Bless! This makes me very thankful and happy that the builders put such care into the process.

[@TRIO_KA_9900]

タイムスタンプ 0:00 オープニング 0:11 スタート 0:17 エンクロージャー用合板接着工程 0:45 エンクロージャー用合板プレス成形工程 1:12 MC によるエンクロージャー用合板切削工程 2:56 切削加工後のバリ取り工程 3:22 エンクロージャー内装組み付け工程 4:49 エンクロージャー傷取り工程 5:49 バッフル傷取り工程 6:13 バッフル研磨工程 7:02 エンクロージャー外装組み付け工程 8:56 中空コイル製造工程 9:32 ネットワーク組み立て工程 10:45 スピーカーユニット磁気回路組み立て工程 11:10 スピーカーユニットフレーム組み付け工程 11:32 スピーカーユニット振動系組み付け工程 12:31 スピーカー組み付け工程 14:00 スピーカーストローク検査 14:13 バッフル組み付け検査 14:23 測定検査 14:33 完成 所々自信が無い所があるので誤りがあったら申し訳ない😢

[@hofct]

Good job 😃

[@lemon_films]

Thank you🥰

[@H.A.T.E_C.H.I.N.K_Lyncher_SB]

Thank you Jap!

[@かず-b5v]

久々に有能な人をネットで見た！ありがとう！！

[@巫行云]

我不喜欢做制造业的事，但是喜欢看这一类视频。

[@rootbeer666]

Anybody else cringe when they screwed in the crossover PCB directly to the wood without any standoffs and it warped because they provided no clearance for the through hole soldering underneath? 😬

[@bobkos333]

I saw the same thing and literally said "OUCH" out loud!

[@АлександраМезенцева-н2з]

Ещё я увидел стальной молоток стучали по дереву, много клея, очень много клея.

[@RascalCatify]

Especially when you consider these things start at $14,300 US dollars per pair!

[@GoodWill-s8j]

☝️

[@arbjful]

@@АлександраМезенцева-н2зyes too much glue

[@user-md7vf6ri5w]

I’m Usher user for 10 yrs, never encountered any issues! Last yr I bought my 4th spk ML802, compare to other I have in the same price, it's an absolute bargain. As a woodworker, those who insist on using wooden mallets are simply not practical. After seeing other high priced spks processes, I must say their crafts is already quite impressive. While there are certainly some details to improve upon, in terms of the finished product and especially sound quality, it's definitely worth it!

[@markmalasics3413]

$26,000 US for a pair of speakers is an absolute bargain? I'll just go in my basement and chip what I need off my collection of gold bars.

[@boboutelama5748]

I was interested in Usher back then. But they had a thin distributor network and it wasn't possible to approach one. So I got with a PMC Fact8 and I'm happy with it.

[@matthewn1805]

Glad you like them, personally I think they look awful and I was very unimpressed by the standard of soldering.

[@garethsnaim8174]

Perhaps they sound good but they way they were put together was just rough. particularly the gluing of internal components, jees.

[@kevinknapp7361]

In today's audio world, there's way better for less.

[@ZipTronic]

Out of my 25 years in the glass business, I have only seen one home that had high end speakers. Now had I said 35 years in the glass business I am sure I would tell you I seen more. But what I see is almost everyone uses bluetooth speakers now. And wow very beautiful and well crafted handmade speaker, I think the only thing I could criticize is the screwing of the circuit board to the enclosure without stand offs

[@jimtincher7357]

Actually there was a standoff... it looked like foam to absorb vibration and to isolate the board.

[@LausbubDaniel]

Die Arbeiten wie die Büffel ohne Gefühl

[@wally7856]

@@jimtincher7357 Notice how the board locally flexed once screwed down 12:51 . Inducing unnecessary flex in the brittle board doesn't seem like good practise, stand offs would be better. 10:37 those 2 inductors (coils) should be mounted perpendicular to each other. In their current orientation the magnetic field from one is close enough to induce a current in the other.

[@TinNguyen-bw7ww]

I think the professional level of workers is still poor

[@richie4540]

@@wally7856 maybe its part of the sound design ?

[@smn742]

ฝีมือคนใต้หวันเยี่ยมมาก ตั้งใจทำมาก

[@bertroost1675]

I own a fine pair of wood veneered Usher 520s speakers. I have had them for almost 15 years. Very good speakers and well made.

[@ajay30572]

It is Usher's proud work

[@DrNoahBoddy004]

I ABSOLUTELY ADORE beautiful TAPEI, and ESPECIALLY USHER*!🌷🌹 ML-802’s are simply gorgeous! I can’t wait ‘til my bonus comes! I will cherish these works of art a lifetime!

[@Joey7049-g8l]

ML802一直是我的Hi-END，聽2-3小時都不膩

[@martinwtaylor]

I've had my Usher Be-20 speakers for 16 years now. They just keep getting better as my system improves. Fantastic sound quality and very heavy!

[@waldek2030]

Since 1972'...WOW One year younger than me 😊 Congratulations, and good job !

[@screwsnutsandbolts]

Excellent video ! 👍

[@ElephantSoul]

I love this

[@mansize6622]

You love everything.

[@fingpolak]

Pretty crude speaker tech in nice wooden packaging.

[@MsCorbacho]

I tought the same

[@PTL4179]

Agreed! Can’t see the high end components

[@ActiveJoe]

As someone watching from the US • Watching your videos is most relaxing even at 2 x speed. Hope your customers appreciate the skill talent and dedication of your workers for this very important job for the community • It’s good to see how well you understand the design and layouts of the speaker systems to get the job done efficiently - loads of experience is evident with this skilled set of workers • Watching your people doing a great job make me think there is hope for the other parts of society who don't even try to have a job. Your crew is a great role model for all of us • Thanks so very much for posting and sharing! All the best and God Bless. 🇺🇸

[@lemon_films]

Thank you🥰

[@thejumbo]

The last time i saw this level of hands on craftsmanship was when i toured Paradigm in Toronto. Bravo. Lovely stuff.

[@masgprojectofficial936]

Luar biasa .bisa langsung melihat prosesnya.terima kasih

[@АнтонАнтон-о4с]

Плата прям без проставок саморезами крепится?)) без дистансеров?

[@benbenchannel2]

สวย เเต่เสียงก็เเล้วเเต่หูคนชอบ

[@WindsEternal]

I love this! The way they do epoxy at 11:02 is genius!

[@マッドマックス-j1g]

独特なスピーカーコーンしてますねネットカバーも無いしホコリとか溜まったら掃除し辛そう

[@vaamozmaps2985]

Yeah they used high quality parts😊😊😊 it's awesome 🎉🎉🎉

[@gentarbos3818]

saya suka prosesnya.dari indonesia.

[@chloeleedow7250]

Pneumatic tools are just a whole vibe lol love them! Apparently KZbin thought that I needed to see this video again and I'm ok with that 😂 ❤

[@WorldFamousUnfluencer]

I am very much doubting the "high end" claim here. The tolerances and manual gluing parts together at 4:00 seems to be pretty poor. Big gaps, joint glue is not spread out properly. This is one of those product that may LOOK high end on the outside, but is just poor quality. 7:00 Just surface mounting the baffle to the cabinet with sicaflex and nothing else is a cheap solution. Also at 9:00 this is not making of speaker drivers, this is the cross over. Made with really cheap parts with low tolerances, Same here, nothing high end about this. At 12:00 no clamping on the spider after gluing it. 12:45 The cross over board is screwed in too hard and is bent, this will crack and fail over time. 13:45 No gasket seal between the woofers and the cabinet will cause massive cabinet resonances.

[@athief]

Exactly my thoughts. Def. not high quality.

[@androod6211]

Imagine being this wrong. In public!

[@sstrick500]

Careful. You'll trigger some people.

[@MrHristoB]

With you 100% on every point. Just watched Bowers&Wilkins factory tour. Just Light years apart. Screw&glue, the crossover bolting directly to the cabinet was just the the final drop!!

[@teranyeung]

That's what I thought. I doubt it's high end, tho high price. Also, the panels are not protected during installation? Scretches should be everywhere.

[@yvesboutin5604]

Very beautiful and instructive! Thank you! What I appreciate the most, there is no one describing how these are the best speakers in the world and boring us with his incessant chatter! The images speak for themselves!

[@teazer999999]

The most satisfying tool for me is the air powered caulking (gluing) gun. My right hand asked me "Can we get one?".

[@pattygq]

I don't know what I'd use it for but I need it lol

[@teazer999999]

@@pattygq I've been weatherproofing a house, going through many tubes of calking, and just thinking about it makes my right hand hurt.

[@rosskrause3926]

​@@teazer999999I went through it not long ago and know exactly what you mean.

[@RemmikRotus]

I purchased a cheap Ryobi battery powered caulking gun for a big job one time back in 2014. I ended up using it full time, even for small jobs. A hand save for sure. Just get the smallest battery to be lighter and even the smallest will last days of full use.

[@kennetheveritt7450]

Hi,I made a pair of large speakers years ago your film was amazing. So I know the work that goes on,well thank you for an insite on how hand made they with a dedicated team,to see those much detail public do not realise it took me over 6months to make a pair. I rate the film as a top class view. Cheers.

[@МишельПолевой-ь1п]

Почти как и я в гараже делаю. Только мегафрезера нет!😁

[@mrPOCCU9IHUH]

Забавно то, что эта шарага, продавая пару колонок за 14 килобаксов, не может обеспечить персонал СИЗами.

[@ИгорьИгорь-б1ж]

А ну ка покажи своё произведение.

[@ДрачёвыйНапильник-ф9б]

​@@mrPOCCU9IHUHтак они в намордниках

[@mrPOCCU9IHUH]

@@ДрачёвыйНапильник-ф9б Это маска гигиеническая и пыль практически не фильтрует.

[@СергейКоролев-й5и1к]

,, ручная работа,, от слова совсем! Но много.....

[@chloeleedow7250]

Super satisfying thanks for sharing, also I've noticed how many women are doing the soldering and more intricate details of the build on most if not all the factories I've seen. Women do have that eye for detail, I'm a guy but I just know that's facts so love that women are being recognised for their extra abilities in different areas.

[@cheungyam2390]

The famous Marantz vacuum tube amplifier is said to have been manufactured by female workers in Long Island, New York in its early days.

[@chloeleedow7250]

​@@cheungyam2390hey sorry for super late reply, I have only just seen this. Love Marantz, especially its older stuff with the beautiful blue lights Fromm the 70s, although you might be talking about even earlier? I'm really not surprised, Woman definitely bring something to a work environment where love and attention to detail are at the forefront of someone's vision, and marantz especially in its early days was setting high standards that have more or less stuck rather well for a time when things are built to break. 😊

[@bcdjrise]

Outstanding process with such a skilled workers! ❤

[@ivantroegubov9882]

12:48 Плату при таком "подходе" к её креплению в результате механически повело! Не долго будет такой фильтр работать.. В скором времени пайки радиоэлементов дадут микротрещины (холодная пайка) и контакты пропадут. Это уже далеко не высококачественно!)))

[@genaishivatov1737]

Согласен (особенно если паять бессвинцовкой, как делает законопослушный, eu-шный Pro-Ject), солидные фирмы не используют дорожки для сигнала - только кусок ламината как основание для поверхностного монтажа "элемент к элементу".

[@TheElSonador]

Там не пайка, а насрано и вообще кроссоверы надёжнее собирать на скрутках.

[@АлександрЗябликов-щ1я]

​@@genaishivatov1737какие фирмы сейчас это делают, подскажите пожалуйста?

[@СтасНартов]

Тоже согласен. Китай, он такой Китай. Ширпотреб. Высококачественного ничего не увидел.

[@xman80ur]

А две катушки в одной плоскости намотки никого не смутило? Неужели тяжело развернуть одну вертикально?

[@romafreespace]

Lemon Films killing it 🔥🔥🔥

[@謝則偉]

還有很多小細節可以再 精進！老外就是厲害在越不注意的地方，越是有 畫龍點睛 的音效，以HI END的角度分析。如果以20萬級距內，他是可以跨獎。揚聲器的調音是哲學問題，當你深入了解，其實就是 陰陽太極的對應！個人研究喇叭，超過15000hr才摸出其中的精華處，可惜 音響行業，還是民族性產業，還是很敬佩 創辦人 阿水大師！

[@IhsanHabibi-t2j]

Dari lembaran di JD kn box speaker, pantas bgs. Senyawa box nya. 👍👍👍

[@ФедорКошелев-ю6и]

При ТАКОМ оборудовании ,иии ручной труд.... ,,,нет это получение максимального удовольствия от проделанной работы,,, БРАВО РЕБЯТАМ делающим такие вещи.....

[@alexhunter0815]

Amazing work 👍❤

[@kenyang1972]

過去我是從事音磁規，音圈，音模全世界最大的被動元件生產商，難得有機會能整體看完音箱生產。

[@sombatwanchinorot7238]

P7

[@이쁜쌍둥이-g4h]

생각했던것보다 굉장히 열악하네요. 어셔정도 되는 회사면 좀 대단할줄 알았는데 저 일련의 과정이 과연 획일적인 제품품질이 나올수 있을까? 라는 의문이 드네요

[@nikolaybarinov7984]

3:36 Металлическим молотком по дереву, просто шик.

[@sergionicolis664]

Não se bate diretamente na madeira com metal, tinha de usar algum pedaço de madeira intermediária.

[@АлексейКостюхин-ц9з]

​@@sergionicolis664 Или просто нужно использовать резиновый молоток.

[@genagolev2570]

Почему на динамике видны струпья, что за уродство?

[@johnd637]

@@fiscal_registre Ты лучше сделаешь?

[@ЖужелицаСибирская]

@@genagolev2570 Это такая технология, грубые волокна добавляют жёсткость мембране... Подобного типа мембраны есть и у по настоящему дорогих и именитых колонок.

[@TugumehamweRodrick]

Best work God bless the works of your hands

[@PSunday]

Awesome video! In Thailand has Usher importer shop at Fortune 3rd floor. They have many models of USHER spk .

[@currytv3012]

台灣我 在泰國哪裡？ 喇叭！

[@bertroost1675]

I'll be there tomorrow at 2pm

[@recepkaraoglu5553]

Biz teşekkür ederiz.Guzel ve temiz bir imalattı.Bizde hirdavat piyasasında taiwan ürünleri her zaman en üst seviyededir.Kalite BAKIMINDAN.Çin daha sonra gelir..

[@MaitreNinjaPAT]

Vraiment Excellent Merci

[@antoniodasilvasampaio9366]

Parabéns! Serviço altamente qualificado e de qualidade! Salvador, Ba, Brasil.

[@pabloosvaldopenizzotto1098]

Amazing speakers! Beautiful!

[@didiercoret561]

Génial les taïwanais ! Super ! Bon travail !

[@nizarmurar]

Stunning . many thanks

[@lemon_films]

Thank you🥰

[@eoTVoke]

very nice speaker 👍👍

[@alexanderlysenkov2457]

Шедеврально а скажут чото это хай энд, такого кустарного производства я ещё не видел!

[@Edgar42-v7v]

Bom trabalho e qualidade de colunas,

[@Joe-f7c9i]

四十年前上高中的我組裝音嚮前後級功放搭配的揚聲器就雅瑟音響🔊。突然想起青澀的少年時代…

[@micklee8839]

同感，三十多年前我十七岁组装了CD，场 效应管BTL功放和音箱，两年的零花钱就没了。

[@laplacelaplace4582]

以前在台北市漢口街有販賣展示店，不曉得是否還在

[@김민규-k1x5n]

할

[@蔡武訓]

該開駭

[@RedSinter]

The whole process with one exception looks fabulous and that's the Sand Cast Resistors in the Crossover. I certainly appreciate the Large Film Caps and the, I assume OFC voice coils. Along with the PCB board being through the hole. The speaker cages being I assume a cast resin are also excellent.

[@陳建良-u3i]

台灣之光

[@laplacelaplace4582]

台灣的音響剩下沒幾家

[@АлександрОВЕЧКИН-м2х]

Одно удовольствие смотреть как люди работают,выстроена технология.

[@giangvu7902]

This video is so satisfying to watch. Thank you for posting! And I have owned Usher speakers in the past and they are quite warm and special.

[@lemon_films]

Thank you🥰

[@SHUBHAMTANDON-ut3wo]

i love this job This looks very satisfying❤

[@VietnameseCraftsmanship]

你好，台湾的朋友！很高兴能找到你的频道，你的视频做得太棒了！我也打算做关于我的国家越南的视频，只是还没时间。祝你身体健康！

[@tplink5952]

用这样的方式生产，产能肯定不会过剩。这我就放心了。

[@暗黑的破壞神]

高端客戶就愛手工的 市場決定

[@Asika-lin]

国内实在太卷了

[@Asika-lin]

@@暗黑的破壞神 是的

[@RaseduOfficial]

I love this product 📡📡📺📷🇰🇪

[@apb64]

Наколенное производство... Особенно порадовала работа электродрелью, как дядя Миша в гараже... )))

[@MaseratiBoy]

Если дрель не использовать, тогда это будет не Hi-End а файбричный ширпотреб! :)))

[@firebearfl643]

Definitely high-end. Very nice.

[@micklee8839]

分频器看起来可以，音箱里面用什么吸音材料？

[@deshdeepak4494]

Very nice 👌 👍 👏 😀 😊🎉

[@jeremysumpter8939]

This is why there is so many people in audio. The profits are insane. I get that it is low volume, but still. The ones being made retail for 14 grand, the taller ones 20. With 1000 dollars in materials and labor, good return.

[@ubacow7109]

There are some that are really high value and little to no profits as well, like Philharmoninc Audio and Ascend acoustics. Philharmonic in particular will sell you probably a speaker that costs him like $3K+ in parts and labor but only makes out like $100-200 per speaker

[@niceguy100000]

I think pro audio has lower profits and much better engineering. Midfield monitors or even main monitors.

[@ChicagoRob2]

@@ubacow7109 Agree - Ascend puts a lot of money into custom SEAS drivers and laminated bamboo cabinets, while competitors are using MDF and cheap drivers.

[@ChicagoRob2]

@@niceguy100000 I have Kali LP-6 monitors, and they are insanely good for $400/pair. Plus, no amplification is required, which adds even more value.

[@fwerf5084]

that's the real bullshit of audiophile audio. price is insane, but such videos confirm there's no rocket science in it. just very well, hand made speaker from decent self made components. definitely not worth these insane money. adam audio monitors (to name of other dozens!!) are relatively well priced and sound just amazing for my needs.

[@Vario125HID]

meskipun gak sanggup beli, tapi gw bahagia bisa melihat prosesnya

[@kombikaramujaninja5426]

Parabéns pelo seu trabalho! 👏👏👏

[@eliseujunior4440]

Trabalho fantástico. Saudações do Brazil.

[@mcmillanvideos]

I love the Usher sound. I wish I could hear the latest ones in Southern US. Thanks for showing this process, very nice work!

[@ro63rto]

Soldering skill ? What soldering skills?

[@hom2fu]

soldering iron is too big

[@bevo65]

Mesmerizing!! I know one thing: I cannot afford these. 😅

[@roberto1077b]

Isso não é uma simples caixa de som, mais sim uma obra de arte parabéns pessoal 👏👏👏👏👏👏.

[@777zolan]

مشا الله تحيه من اليمن❤

[@gogadev]

Do you get these speakers in Yemen?

[@lindenhoch8396]

From the video description: "How are high-quality yet affordable speakers produced?". The answer is blowing in the wind, because in my mind at least, 16000 US dollars/set is not what I'd call affordable speakers. The speakers do however look like they're top of the line! Love the finish, and the attention to detail, i.e. home rolling the passover filters.

[@thomaskulpmann1715]

"Affordable" seems a bit relative...

[@Totalplonker]

Layers and layers of material help absorb internal resonances, perhaps. Mind you, internal bracing and non parallel straight edges may also help.

[@christiansuzanne3008]

Arrêtez de nous vendre des enceintes au prix de l'or, Plastique et caoutchouc pour une durée de vie limité. Suivre les marques ancestrales en bois qui peuvent Durrer. Si ce n'est pas du papier ou des compressions ça sonnera moins bien, c'est pas parce que nous sommes à l'air numérique qu'il faut construire n'importe quoi; le son se moque de l'esthétique. Soyez écologique . PLUS DE 50% DES ENCEINTES NE SORTENT PAS UN SON NATUREL; . Je préfère les construire moi même avec passion sans plastique.

[@BenSuzi1980]

the more like 160 dollars wtrf u talking 16k ahahaha

[@lindenhoch8396]

@@BenSuzi1980 LOL no they are not like the shoebox speakers u saved up to doing a paper route bruh wtf

[@comp534]

I have a Dancer Mini X. Although it's been around 10 years, it still produces an unbelievably excellent sound.

[@rungsakthongmuk8538]

Superb!😮

[@Astonmartin2505]

C est juste incroyable et les enceintes sont magnifiques, limite une œuvre d art

[@luishidalgo5469]

Fantástic

[@Bjm21703]

Thanks for sharing. Its great to see how this is performed.

[@mukeshvig174]

What an amazing experience watching these quality built speakers with such care and a love for craftsmanship! This is high-end indeed. I wonder if this is Taiwan 🇹🇼 Thanks and good luck for continued success.

[@tan3072]

Yes it is Taiwan

[@tan3072]

Yes it is Taiwan

[@mukeshvig174]

@@tan3072 Thanks.

[@lemon_films]

Thank you🥰

[@andyrabinotvtech7586]

Wow, amazing work

[@sand0077]

Beautiful construction. I see why these speakers cost as much as they do! 🥰👍

[@YummyFood-ov7bg]

와우 대단합니다, 굿~🥰❤❤❤👍👍👍

[@antoninjedla]

I'll buy this and put it in my apartment building and all my neighbors will have to move straight to Siberia! Otherwise, great and honest work by the craftsmen. I'm from Prague😂

[@mikeunivers]

nice Paradigm clon

[@RRRSaulius]

Отличная работа,красиво смотреть Много ручной работы,что показывает о цене труда и качестве изготовления. Браво👍👌💪

[@SergDj-m4l8h]

Едем на работу туда?)

[@RRRSaulius]

Едим👌😉

[@SergDj-m4l8h]

@@RRRSaulius 👍🚗

[@simpamarak8024]

Piiyupoyypoy

[@simpamarak8024]

Piiyupoyyp

[@photogravazone_]

我有一台二手雅瑟CD播放機，音質還不錯，放公司播音樂，很耐用💯

[@サンパチ-o4o]

キャビネットの木材は湿度があってもソコソコ良い物が仕上がると思うけど、スピーカー自体はどうでしょうかね？ 紙では無く薄膜アルミ素材とか使っているのかな？

[@marcswinnen9100]

It looks good 😊

[@MuscleBN]

Should not max torque the screws in until they are all screwed in..also she max torque the screws on one area only..this puts alot of stress on that one area..good way to stripp screws..u alternate diagonally the application..

[@ChicagoRob2]

Watch some B&W videos, to see what true high-end loudspeaker manufacturing looks like.

[@MuscleBN]

First of all your statement is not relevant to My response..I am a mechanical engineer and a hi end audiophile for over 40 years...and be careful about referencing b&w speakers because only the 800 series is manufactured in England and everything else in mass produced in China..and I am not diminishing some of the Qualiry components that come out of China..But emphasing the "mass produced" statement

[@tiloalo]

They didn't show the whole sequence, so hard to tell if she only torqued one or all. Also, the driver used may be set to only reach a set torque.

[@MuscleBN]

Yes, but my point with a heavy driver and a huge magnet structure has a lot of weight centralized initially.so the pull force will be enhanced in that location before the whole driver is installed.also the driver with that much weight should be supported while all the fasteners are attached.Then and only then should they be torqued in a diagonally opposed fashion

[@tiloalo]

@@MuscleBN true, but honestly there is so much wrong in this video that they don't seem to care much...

[@anmeirdi]

This is indeed top craftsmanship! There is only one item I would do differently. I saw that the speakers were screwed down while the cabinets were in a vertical position. I think it would be better if they were horizontal.

[@johnstuartsmith]

It seems like it would easier to install the crossovers before gluing the front panel on.

[@王沼雄]

以前我買套件DIY,那時叫瑞豐音響?

[@phantompower2]

早期是瑞豐音響社，後來蔡連水阿水USHER，才註冊雅瑟

[@elzbietabarabasznowak2635]

😅​@@phantompower2

[@user-is...8964]

在台中電子街時....經常放1812序曲....

[@王沼雄]

@@user-is...8964 蹦很大聲！

[@蔡瑞益-i2o]

​@@user-is...8964還有史特勞斯圓舞曲

[@yaulkwong3775]

那個壓木，跟B&W 8014D 很像，但手工方面應該要多點測量功夫／儀器，而那個設計是可以更進一步的。 既然ＴＳＭＣ可以世界第一， ＵＳＨＥＲ也應該可更進一步。

[@Edwdcho]

모든 유닛을 자체제작하는지 모르겠지만 요새같이 분업화된 오디오계에서... 중국 말고도 동양에도 자사 유닛을 만들어서 생산하려는 완성품업체가 있네요. 앞으로도 좋은 제품 많이 만드시고 세계적 명성도 얻으시길.....

[@jw2220]

보기에 4인치 미드레인지만 생산하는듯합니다. 우퍼는 스켄스픽 8545를 흉내낸듯하고 (국내에도 차량용으로 90년대후반 '솔로'라는 이름으로 8545와같은 중국산이있죠), 그 옆에 스피커 우퍼도 이톤 헥사콘을 사용한듯합니다 (중국산 페이크) 그래도 인크로져에 격벽을 제대로 했고 피아노 글라시 마감과 패시브 네트웤 공심코일을 감는거 보니 꽤나 작업범위가 넓네요. 다만 내부선재를 조금만 더 좋은걸 썼었으면 어땠을까,라는...