Great demonstration. Thanks for sharing. I like your neat slow info sharing.
@sub12airgunners3 жыл бұрын
Glad it was helpful!
@jaysteele55073 жыл бұрын
I just love your vids, thanks for explaining things.
@sub12airgunners3 жыл бұрын
Glad you like them! Thanks for watching.
@vdml3 жыл бұрын
Thank you for the video. It seems there are 3 parts dealing with the fpe, the puck, power jet and reg.
@sub12airgunners3 жыл бұрын
Yep, bit of a juggling act with the 3 variables, but that's part of the fun. Thanks for watching 👍
@leticiabraun29093 жыл бұрын
Nicely done video, clear and concise. Please make some more :-)
@SHRAPNEL_LEGO3 жыл бұрын
Great vid friend! Subbed to you. It would be nice if you could full disassemble the main valve :) Your commentary is great. Keep going
@sub12airgunners3 жыл бұрын
Thanks, I hope to do a full disassembly in the future not quite ready yet but its on the cards. thanks for watching.
@leec85923 жыл бұрын
Great video buddy! Thanks for posting
@sub12airgunners3 жыл бұрын
No problem 👍
@davidlimb75813 жыл бұрын
Hi I agree very well explained
@yawash24223 жыл бұрын
Thanks alot ... but if i want to increase the power .... should i use jets with bigger or smaller size ?? I mean will 0.7mm or the 0.9mm give more power .. ?
@sub12airgunners3 жыл бұрын
The smaller jets will give you more power, 0.7mm will give more power than 0.9mm. Thanks for watching.
@yawash24223 жыл бұрын
@@sub12airgunners thanks for replying.. hope the best for you .. good luck
@R2D8883 жыл бұрын
I've noticed on some Leshiy 2 videos rather than having 2 valves with openings, one is just a blank or a screw while the other is a valve of a certain size. I wonder if this makes for a more consistent air flow? Also, I'm sure you've read on edgun West or Francisco's site that the sum of, or if you're using just the one valve and a blank, should not be more than 1.7.
@sub12airgunners3 жыл бұрын
I think the blank is more for the FAC versions, the ones with the blank in seem to use one very small jet (0.2mm / 0.3mm) to delay the closing of the valve, in order to achieve the most power, but I have just completed machining of a set of jets (0.2mm - 1.4mm) so I soon will be having a play around with the different configs, I have read that the sum of the two valves does not need to exceed 2.0mm but I didn't know there was a limit on one single valve ill have another look on the EDgun websites though so thanks. Thanks for watching.
@honestjohn52673 жыл бұрын
Great detail ,thanks.
@sub12airgunners3 жыл бұрын
Glad it was helpful!
@interstellarv0id3 жыл бұрын
These nozzles are not included in a Leshiy 2 kit. At least mine was without them
@charleswatson39512 жыл бұрын
Hi there, I have the leishy 2. I have 2 x .8 jets and the full open puck im only at 10ftlb. Would you think I need to increase the regulator pressure? Or go smaller on the jets?
@charleswatson39512 жыл бұрын
Oh thanks for all the videos. Extremely helpful
@user-de1in5vm1z10 ай бұрын
Hello. Which silikon grease do i need for the orings? Or is it not necessary?
@sub12airgunners10 ай бұрын
any good silicon grease will do the job abbey is a good one
@jeffhello14443 жыл бұрын
nice one 👍👍
@magnum37403 жыл бұрын
Thank you it’s very useful video , am wondering ! the jet valves doing what ?
@sub12airgunners3 жыл бұрын
The Jets control the speed in which the main valve closes after the rifle has been shot, the larger the two jets are, the quicker the valve closes and therefore the power will be lower, the smaller the jets are the longer the valve will remain open and the power will be higher. thanks for watching.
@electrichellion59463 жыл бұрын
@@sub12airgunners Thanks for this explanation.
@WAFU633 жыл бұрын
Hi Can I ask when you ordered your gun, ei what was the wait time? I have one on order but don't want to keep bothering Francisco.
@sub12airgunners3 жыл бұрын
Sorry missed this message, I ordered mine in early October and received it just before the end of the year on the 29th of December, I hope that helps.
@thetgrenadegranada15703 жыл бұрын
Why are you removing it? What does it do?
@chrisboddy97753 жыл бұрын
Great video thanks 😊
@sub12airgunners3 жыл бұрын
No problem, thanks for watching.
@derekswift9693 жыл бұрын
What size puck have you found works best for 12ftlb with the reaper regulator
@sub12airgunners3 жыл бұрын
Not had the Reaper reg yet, but on the standard reg I used a 4mm puck size for my set up. Thanks for watching.
@stevejohnson17973 жыл бұрын
Great vidio good gun, got the mk1 but i honestly dont think its worth the crazy price tag!
@sub12airgunners3 жыл бұрын
The MK1 was a great gun as well, but the L2 is probably the best rifle I have ever handled, and unfortunately that's whys its the price it is. Thanks for watching.
@ijazxperia3 жыл бұрын
I need fully disassembly video please ex drigger & safety barrel
@sub12airgunners3 жыл бұрын
Ill be doing one on the channel in the not so distant future so keep an eye out. Thanks for watching.
@justin777823 жыл бұрын
I didn’t understand the purpose of taking it apart was it just to show people how or were you replacing something
@sub12airgunners3 жыл бұрын
This was the first time with the rifle and I just took it apart to show you whats inside, you need to take it apart to change the power jets and I wanted to see which ones were installed on my rifle. Thanks for watching.
@jaytee81883 жыл бұрын
I thought that it was explained at the beginning of the video, that the official videos on this process were animations and it was felt that a video of the process actually being undertaken might be of benefit. I could be wrong.
@stevejohnson17973 жыл бұрын
No way this thing justifies a £2600 uk price tag. Way to overpriced for what it is..