Part I - How To Car Alarm Remote Start System Installation

[@epoen2012]

Awesome video, nice idea on drill-twisting the wires. I won't attempt this myself but I hope whoever that installs mine will be as thoughtful. Thanks for the video

[@Stewarts_Woodworks]

Yeah, I've already seen that one and many others. Feel pretty confident at this point with the install, except its still bothering me that I don't know exactly what it means that some connections are listed as negative and some positive.

[@kylefisher2059]

Instead of opening and closing your drill every time you want to twist wires, i would suggest that you put an eye hook or eye bolt in the drill and then just put about 2 inches of wire through the eye and hold it and spin it.

[@Djduva107]

Idk if this is the Right way , but man this is the best video about install here on youtube , thanks for the help

[@Lesscoelectronics]

yes, the bypass is for the transponder chip key, so that sounds right, as for the relay he's probably right again, youd need one for illuminated entry, starter kill and / or trunk pop

[@tlalneyork]

JUST SO AWEEEEEEEEESOME!... as you said "people supposed to do this" and they do a nasty work... Congratulations this is the thing that I was looking!

[@martapagan4314]

Very easy-to-follow instructions, but the older gentleman that does videos about cars made a very good point. His name is Scotty and he said that my 2007 Volvo XC90 may already have a factory installed alarm. He also stated in his video that no one should ever put an after-market alarm on their vehicle. Now the reason I want a remote start is, that I want to warm up my vehicle before I get into it in the winter. I'm curious what would be your input on the matter.

[@briizcustoms9543]

Why?

[@أبورفيدة-ن4ط]

اهلا انا عبد الله من الجزائر انا مسرور بهذه القناة و استفدت منها كثيرا ...... شكرا جزيلا

[@Mechanicturfgear]

In the video is the insulation stripped away or just poked a hole through with cotter pin extractor .before adding new wire .Thanks . Plan on installing mine soon and want the easiest way possible . Nice video .

[@Lesscoelectronics]

you always need to add a relay to add trunk pop. wire it for a negative output: TRUNK RELEASE GRAY(-) USA/CAN, PURPLE (-) JAPAN @ DRIVERS KICK, PIN 20 IN WHITE 22-PIN PLUG

[@Lesscoelectronics]

Thats a good alarm, the car is pretty easy too, the only thing with that car is you have to program double pulse unlock (if you want all the doors to lok simultanously) you can leave it as is and hit the remote 2x to make it a 2 step system though too, which is cool.

[@Lesscoelectronics]

Are you working on a manual trans car by chance? Cause if you are those need to have the wire ran into the engine compartment due to the cluch keeping the circuit open

[@eddiet7348]

My wife just bought me the viper 5305v and I don't see a starter kill relay do I need to add my own or is it internal? If u could help me out I would appreciate it... Btw I love your vids u think it's very helpful keep up d good work!

[@ceedeegutierrez]

Awesome series! Is it hard to the add diodes for an additional shock sensor?

[@g19lover]

Very nice, I too twist all my wires. Makes it a lot easier to find them when you do the actual install.

[@Criscv08]

Hey great video series its helping me alot. Got a question on my hand book for my remote start were it shows how to wire the relay for the starter disable well on one part its say "make certain to connect brown wire to starter motor side." by it does it mean to connect that wire direct to the starter? If you could help me out so that I don't mess up when I install this in my car on the weekend. Thanks

[@trugracie]

Thank you for taking the time to make these videos, they've really helped me to get my install prep of the Excalibur 1660 easier. I'm installing on a 2011 Tundra Crewmax and wanted to know if I need any additional modules or anything to use the remote start?

[@Lesscoelectronics]

+Carlos Orellana get a transponder key bypass, either the ol-blade or a fortin evo-all

[@trugracie]

+Lessco Electronics Thank you for the advice! I followed as much as I could from this video to prep my wires but sometimes you can't don't clearly say what lines you're cutting on the 18 pin. Do you by any chance have a wiring diagram for dummies that clarifies everything. I've almost got it all prepped just missing the horn and lights. My email is [e-mail] Thank you!

[@Lesscoelectronics]

I dont really have that but you can always call us. 904 342 5491

[@Lesscoelectronics]

Easy, Go under the driver dash, You may have to take some stuff apart, Look for the main alarm module-You cant miss it its a black box with a jillion wires coming out of it. The blue 2 pin plug is the valet switch, Follow that to the end, there my friend is your switch.

[@lilpecky540]

awesome vid thanks alot, one dumb stupid question, if my car says its a negative door trigger, do i use the negative door trigger wire from the alarm system or positive? im just a lil stuck on that.

[@slaptwin7867]

you are a master of your craft sir ,well done.... very helpfull

[@MRHIM-cc7uh]

the workman ship looks great . I am trying to learn my self how to install alarms. I know the basic but I want to learn it like the pros. .

[@Lesscoelectronics]

You do that by tying into the factory arm/disarm wires coming out of the driver door typically. Sometimes its done through the door locks (depens on the car)

[@Codyclark02]

I can't believe I've never thought of using the drill twist up the wires like that!

[@danaveincent]

yeah i later realized that thanks. I also installed motors (Xpress P3500 2-wire actuator) so the alarm could pop the locks, but it doesn't send enough power to the motors. Any idea how to fix that problem? Every thing else about the alarm works great.

[@raysrock2898]

I really enjoyed your videos. I have a 1998 Dodge Ram 1500 5.2L I have purchased a Viper 5706V what type of relays do I need to complete the whole install. Thank you for your help.

[@anastasiyav6687]

how do i get the cheat sheet for the wiring??

[@amplecleaner]

Do you need a relay for the power door lock, trunk unlock, starter kill and horn? or can you use the same one for all of the above. As well, can you use the output for the siren to the horns instead. Thanks

[@da001boss]

Can u explain how to integrate aftermarket with factory alarm? Is it as easy as wire to wire plus the extras?

[@Jcole3434]

cut the wires to length and put them in split loom when your done, very clean, and no risk

[@mezanoly]

instead of cutting the un-needed wires during wire prep, is it okay to just depin them?

[@Lesscoelectronics]

+Mezan Ly you can, if you prefer that

[@rogerbrandt6678]

Nice to see a proper video, for your time I will order from you next time, happy new year.

[@itsmeshawman]

Thank you, very detailed install as well, not some 15 minute video showing me a jumbled mass of wires.

[@jonathanalvarez8952]

Great video. I am new to alarms so im not too familiar with how what goes but watching you video I got an idea. Only qurstion is I see I have one set of wires for one actuator how or what do I wire the second one. Also I dont want it to were I click it once both door unlock I would like the one for one and 2 for both.

[@Lesscoelectronics]

watch my video on adding adding actuators and/or the 5 wire relay wiring I have posted.

[@levibutler9900]

if you need just the alarm portion and not the remote start, do you need the immobilizer?

[@tomclark8552]

I'm installing a Avital 4130 into a 2009 Ford Taurus and was wondering if I will need a bypass kit?

[@chadhand4066]

I have the same problem right now. I am seeing 12V on starter wire only when i use the key to start. When I try to remote start I hear a relay clicking on the module, parking lights flash on, ignition comes on briefly but then no start signal is sent. The car I am working on is a 2010 Ford Focus. I have a Fortin Evo-Ride bypass module, which I have not yet programmed because I want to make sure the remote start portion works first (simulating this by touching the driver motor lock wire to ground

[@amieandbrianblunck9816]

Ur video was very helpful thank you for putting out ur video

[@thetechguyishere]

Ok so I almost never comment on people video's for installation instructions but the one most biggest problem with people posting videos for any type of installation is they spend almost the whole video teaching people about wiring or little tricks to organize all the cables. That's not what this video is about. If the person watching this video doesn't have any type of electrical knowledge or experience they need to be watching a different video . This video is instructions on how to install the alarm. Not about how to make the wires look nice. And for professional installation never tell a person cut this cut that wire because every vehicle installation is different.

[@kennmaxx4202]

Hey Buddy. First of all thanks for this videos series! I have watched it all a few times now, just to properly get a grasp of things. I am about to buy a Code Alarm ca6552 2-way with alarm/start. What are our thoughts on that? I will be installing that in a 99 Maxima (manual), no immobilizer. Have you done this car before, anything I should know? Thanks for all of your help! Ken

[@Elliot-pl6cs]

I have never seen wires twisted like that in a car. Great idea.

[@Quijas707]

Hello, your videos are very helpful. I’m having issues with my viper 4806v . I’m not sure what wires I need for the remote start to work? I’m installing the remote start in a 1990 Chevrolet Silverado . Can you help me ? Can you do a video or help me with a diagram? I installed the relays for the keyless entry and it works . I installed the starter wires that I thought would be the correct ones but it does not work. There’s also a fuse inside the viper alarm that don’t know which side to plug it in (positive or negative) thank you very much for your videos and your help.

[@str8loco85]

Im trying to install Pro Code Alram in my crown victoria. I got information needed for my car from the wesite you recomended. But im still confused how to continue the installment. Any advise will be helpful. Thank you

[@Snip3City]

i just bought an viper 5901 alarm system.it did not come with a shock sensor is this vital to the alarm system or can it operate properly without it.

[@ManuelPerez-qt6xm]

Hello I'm going to install a viper 5204 on my 2000 Honda civic. I would like to know if I need a bypass if I do, which one do u recommend ?

[@skootb2]

so if your vehicle has negative door triggers you dont need the positive door trigger wire from the alarm?

[@29lmarquez]

I plan on installing a Viper 5704V with an iDatalink ADSALCA into a 2006 Honda Odyssey. I have two questions I would like your help with. Will I need any relays for this install? I would like to use the feature that normally controls the trunk release to control the sliding doors...how would I accomplish that? Thank you in advance.

[@Amirocassar]

One more question, sorry. Do you believe in splicing for installing a remote starter or no?

[@trueblood1958]

Can you please walk through installing a remote start alarm system on a 2005 Ford F150 Lariat with a chipped ignition key that requires a Bypass module for the remote start, how to video would be great. Or just how to install the bypass module for the chipped key? Thank You From South Texas.

[@M1staG4MER]

Whats the prices for the wiring info?? KZbin vids helped me out alot and the wire info would make life alot more easier too.. tks in advance. I need 3 for 3 diffrent vehicles. 1998 chevy Express 2500 5.7L 8 cylinder cargo van 2004 Cadillac Deville Base 4.6L 8 cylinder 2002 Acura MDX base 3.5L 6cylinder awd

[@rogerbrandt6678]

Thank u in these hard times you saved me needed money, thank you very much sir.

[@thewillpower6970]

Hello, thanks for this Prep video! I own 2003 Isuzu rodeo 4wd 3.2l and am installing Excallibur 1850. I have been following your prep but since you were installing on Toyotal am not sure if wire twisting is the same on the 16 pin harness (see video #2). Please I need your help from prep to the install. I have all necessary things available for this. Thanks

[@O.k-fh2lq]

Thanks for the video, last 2 weeks someone try to steal my car and he fell asleep trying to. Need help getting a wiring sheet for 2000 Toyota Corolla.

[@chicano562]

great teacher man thanks alot

[@Elbori0512]

i wanna get into var alarm install ation and i found your videos and wanna thank you for the info. very helpfull! soon i will be doing my own car and might have a few questions, i hope not lol

[@14steph]

I have a viper remote start system and I know its an older one but I do not know where to locate the model I have an 03 impala if that helps and new replacement remotes but cant seem to program or locate instructions on how to reprogram the remotes. Any advice would be helpful also I do know where the valet switch is.

[@miroslav_jovic]

Hi I have a question. I have manual transmission, and installing Viper 5904 with remote start. 1. Do I need relay kill, and is it built into this unit already. 2. I have manual transmission, so when you said to the guy above he needs to run a wire to the engine compartment, which wire are you talking about ? I looked at some videos on how to bypass the clutch switch but i want to do it right. I still want to have to use the clutch in order to start the car,

[@ahmedelsawy567]

My dear ,I have lancer GLX 1600cc (CS3) - ,I did the full installation as you did but I have only one problem ,it is that when pressing remote start ,the starter will run but with no ignition- the only way to start it is to insert the Key and turn to IGN or to ON ,the press remote start and will start prefectlly

[@Lesscoelectronics]

Ahmed Elsawi what year is that and is it the same as the usa model lancer by mitsubishi?

[@ahmedelsawy567]

i brought it from UAE,dubai -it is the old shape lancer as 2007 one -some countries calling CS3 - other calling Cedia , full automatic car

[@ahmedelsawy567]

and sorry i do not know what is the USA model of Lancer

[@aureliozamora3822]

BY THE WAY THE VIDEO IS AWESOME AND IT HELPS ALL THE DIY'S OUTTHER.

[@cj30004]

I have a aftermarket alarm in my car. Can i just replace the module and plug in the old wires or no?

[@laohoucheong1984]

Hi mate from Australia, i luv all ur video and they are great. Keep up with the good work. Just a quick question, what happen if I can't find the car that I want to hook up an alarm system onto from wiringinstructions-com I cant some of the Australian made vehicles such as 2002 Suzuki Ignis, Ford Flacon, AND Holden Commdore. thanks

[@sshukri75]

I just watched your video I've been always wanted to know how to do a remote start system and thank you for the post

[@Lesscoelectronics]

anytime

[@RYDENROAM72]

i see that this was put out 7 years ago. I was wondering if you have found about Tesa Tape? its cleaner and looks more professional. im not saying that you did a bad job but you have mentioned that your not a fan of Electric tape.

[@MrKiddo9200]

I use Tesa AKA fabric tape, but holy hell that stuff is expensive

[@Arcturian1111]

Great video. Question: Is it possible to install a remote start on an old truck? I have a 93 Ford Ranger. If so can you recommend one please

[@MrFlirt29]

Great Work.... Q: I Have An 02 Grand Prix Se With A Viper Alarm/remote start BEST buy installed it but ever since they installed that remote start I can't start my car with my key anymore.... when I try to use my key to start my car the security light flash and my car cuts off... but once I start it with the remote put the key to on and hit the brake turn the car off and then start it with the key the car Will start but my security light Will Stay on... can you tell me what the problem can be

[@wilkey21]

ok im tryna wire up my alarm remote start in my 2000 gmc sierra 1500 too and in your video u cut some wires out that you dont need, how do i know if i need the wires or not?

[@iambelzer]

Thanks a millo. Where can I find my wiring diagram for a Toyota camery 05 ?

[@queperry]

Just had my car broken into and will be attempting a security/remote start install. Car is a '93 Lexus GS300. Looked at the diagrams and light research. Anything particularly hard about this type of install? Thank you for a great video set as well.

[@danaveincent]

Hey Lessco, I'm installing a viper alarm system in my 1993 Toyota pickup. Do I need the relay? and what is it for? the directions say nothing about the relay.

[@keung71182]

Hey do you connect the smaller wires the same way as the thicker wire?

[@fidoguillora1]

Hey Martin, your videos have helped me very much, but i have a little problem, after install everything of the remote start, i press the button of start in the remote and the car cranks but doesnt start. I put the key in the cylinder of ignition but is the same, crank but doesnt start. my alarm is a viper 5706v and the car is a toyota land cruiser 1997. I hope that you can help me, Thanks

[@Lesscoelectronics]

Manuel Ramirez check if the truck has a 2nd starter wire. that may be it, otherwise check all the ignitions are powered on, tach is learned etc...

[@fidoguillora1]

Lessco Electronics i dont have a 2nd starter wire, i have checked all the ignitions and they are powered, this alarm has virtual tach. I have connected the wires in this manner: fused 12v acc/starter (red/black) To==> (white/red) wire in the truck(12V constant) 87a of ignition 2 flex relay(pink/black) To==> (black/red) key side ignition 2 ignition 2 flex relay output(pink/white) To==> (black/red) car side ignition 2 fused ignition 1 12v (red) To==>(black) 12V constant starter output(violet) To==> (black/white) starter wire of the truck accessory output(orange) To==>(blue/red) accesory fused ignition2 /flex relay input 87(red/white)To==>(white/red) 12V constant ignition 1 input/output(pink) To==> (black/yellow) ignition 1 www.directeddealers.com/manuals/IG/Viper/N5702V_2008_08web.pdf www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.aspx (land cruiser 1997)

[@DinasGarage]

Thank you for doing this! I have a 2003 F150 supercrew I would like to install an alarm and remote start. What do you recommend for it that is a good reliable system and what else will I need in terms of a bypass. Thank you hope to hear from you!

[@ForensicGuySC]

Good job I'm installing excalibur 1670 alarm system in 1965 Mustang should pretty easy where i just have the Hood Trunk and Doors and the glass detecters and kill Switch and maybe GPS. Any tip before I start. thanks in advance. Steven

[@Lesscoelectronics]

nope, just take your time, those old cars like to be treated like proper ladies

[@ForensicGuySC]

@@Lesscoelectronics where do find cheat sheet for 65 Mustang Cope Thanks again

[@Stewarts_Woodworks]

Okay, Mr. Lessco, purchased a viper 4103 keyless entry/remote start and would like to install it myself.My question is why is there a (-) beside some of the circuits and a (+) beside the others on the included wire identification sheet?

[@guesswhomartin9249]

You are so funny. I've seen guys say the same thing. They say; I'm gonna show you the right way to do this. But in reality; your way of doing things is no different or no better than the next person. Hey; they all work. I saw a doctor once, mocking all these vitamins... Don't take these and don't take those. Here use mine instead. My God, I was laughing. I thought the doctor was gonna say; eat fruits and vegetables instead. The doctor was promoting his own pills. You're no different. Hey, everybody's ideas are good, including yours. All are good. Thank you for the video.

[@MrMaksatT]

Hi there, I've a serious question. please answer. I've just installed 2 way car alarm with remote start function. I thought that I connected 6 wires for ignition switch correctly. But remote starter is not working. there is no 12v on starter wire when I try to remotely start. I didn't use a start kill relay, because I had no idea about it. can you help me?

[@rtbowser1]

Did you used to work for Kustom Kar Sound in Mesa Arizona?

[@Stewarts_Woodworks]

Also Mr. Lessco, (thanks for your patience) How do I check an activation circuit, i.e. dome light, horn honk, etc, with my multi-meter to see if its a positive or negative circuit?

[@jhood69691]

Hi I have a 97 vw jetta 2.0 I just installed the avital 4103 everything went smooth until the lock and unlock for the doors the tech sheet says it's a type a system I can only seem to find one wire that gives off a 12 volt when the unlock button is hit on the car. Now when I hook my lock wire up to it the remote will lock my door but that's it I also understand that it's a double pulse system and the unlock needs 12 volts. Please any help with this would be great I've been driving my car with wires hanging hanging out everywhere I don't wanna put it back together till it's complete. Thanks for your time.

[@theslicks1394]

this may be a stupid question, but do i need power locks?

[@sarahray3918]

I have a 2000 Chrysler 300m with a gray key will a need a bypass kit for the key

[@maherzaidan7190]

Hi I have a prestige remote starter APS687A I have to Add circuit relay to starter wire . thank you for your help

[@Lesscoelectronics]

Maher Zaidan if you need to buy one, call us 904 342 5491

[@metssuck90gt]

great video, but where did you get the tech sheet for the vehicle. i'm installing it on a 09 galant and now audiovox will only give the tech sheet info to a dealer. any suggestions?

[@Lesscoelectronics]

follow the instructions in this video: Free Vehicle Wiring Info NO, REALLY!!!! It's free

[@Lesscoelectronics]

Look at the excalibur al1850edpb and the fortin evo can. thats a great system and a fair price too

[@jawojnicki]

HI Lessco. Where might one find 1700 electrical tape OTHER than online?? I have checked the big box stores and they don't have it - only 700, NOT 1700. Thanks

[@5000NATE]

How do you test the alarm for 6 tones I only heard it go off one time I'm only getting the warning on the alarm?

[@JoeFlash1]

I purchased an 01 Ford Expedition with a Viper 771XV alarm. The remote starter run time is only 45 seconds. I read the manual online and cant figure out how to program it to run longer. Any ideas?

[@ukkuralagammehelagedarawij4112]

you tube is the best videos

[@aku9010]

my remote starter beeps four times and makes a clicking noise under the dash but the car will not start. Any thoughts? All other buttons works, arm, disarm, and truck open.

[@jdmsir231]

So I have the evo all installed but I was advised not to disconnect my battery cables unless I knew how to reprogram the module or else the car would no longer start? Is that true? Lessco Electronics

[@MrMaksatT]

it's not a manual car, it's a CVT car. Ford Escape 2008 hybrid. Is starter kill relay required for remote starting?

[@turbotime55]

Hello TheLessco,I have a 2006 Saab 9-7x with factory alarm. I would like to put a remote start unit but still keep my factory alarm. And if it is possible to use my remote. Hope you can help me ? Thanks

[@Amirocassar]

Couple of questions. I bought an xpresskit bypass and a crimestopper rs4-g4. Certain wires of both have to be hooked to the same wires, is it okay to hook them up on the same location of the wire? Meaning, a wire from the remote starter and the bypass and basically touching each other and going to the same wire, or should I cut another piece of the wire and hook them in individual spots? Also, the wire from the bypass to the remote starter is one color, while the wire from the remote starter that's suppose to go to the bypass is another color, is this just common due to different manufacturers? I.e, they don't do the same colors for the wires?

[@makaiblue8934]

Aloha, I enjoyed your videos and I truly appreciate your knowledge. I love the way you use the drill to spin the wires. I recently purchased a 1968 Volkswagen Beetle. I also purchased an AutoPage Car Alarm. Any suggestions on installing in such an older vehicle? I noted that the is no wiring harness diagram for a vehicle that old. I would appreciate any suggestions or help..\\ Mark

[@Lesscoelectronics]

the wiring is awfully simple, but if you want the info anyway I'd invest in a Chilton manual for reference. all else is the same as a new car

[@joshuacruz4046]

Hey I’m installing a viper 5706v remote start alarm I have everything installed except the 10 pins I really need help

[@jeremylemm5208]

Is there anything special I need to install a Viper 4704 on a 2009 Toyota Tacoma Manual transmission and chipped key?

[@Lesscoelectronics]

Whats a cat1 alarm? Is that a brand?

[@dwofps]

Great video. Was wondering what website I can get that cheat sheet from?

[@dewayneoutdoors2423]

Boy that's helpful you got some good 👍

[@ryankuhlmann7679]

any suggestions on a 2007 dodge ram 1500? how do i know what type it is?

[@shawnmckinley85]

Hey buddy can u give me any advice or tips on installing a prestige remote start alarm on a 1999 chevy 2500 this is my first time installing a alarm and I have been doing a lot of research on wiring diagrams I just want to do this right